Reviews
Easy to reupholster.
[How is it used?
We received an XR250 in a very dilapidated state and are in the process of restoring the functional parts and exterior.
It has been a long time since the production ended, and there were not many choices of Seat fabrics for different car models, but ALBA had a lineup for XR, which was a big help.
The purpose of use of the vehicle was unclear because it was given to me unexpectedly, but I was told that a junior friend of mine who enjoys playing in the mountains might be able to ride it, so I decided to use it for both daily riding in the city and playing in the mountains. A normal passenger vehicle." I tried to keep the following in mind.
How was your experience with it?
Even though it is a car model specific Seat Cover, is the price slightly higher than ALBA's other Seat Covers? I thought so, but there are not so many choices...
The construction was solid and we were able to finish the seat upholstery without any problems.
The thickness of the fabric seems to be as thick as OEMSeat, so durability can be expected as long as there are no protrusions or blades to cut into the fabric.
Perhaps because the fabric is too new, the surface was slippery during the test ride after the work was completed, but we believe it will settle down as we ride it.
How did it compare to other products?
Nothing of note, good or bad. OEMSeat Cover parallel." It's like
I have no complaints as this is exactly what we were aiming for with this Seat reupholstery job.
[Points to note]
This is an easy task compared to Universal Product's Seat upholstery since the product is three-dimensionally sewn for the car model. In fact, it may be more troublesome to remove the old Seat Cover.
As a personal tensioning method, I first fasten the front and back of the Seat with Tucker, loosening the tension a bit.:Pair (for Left and Right) Quantity at the time of the stakeout of the:Pair (for Left and Right) The tip of the sponge should be stretched evenly so that there are no gaps in the sponge, and the tip of the sponge should be stretched along the seat sponge without wrinkles to obtain a satisfactory result.
Other items that would be helpful
The deciding factor in the purchase
As inexpensive as possible. It just feels normal." We chose the Seat Cover of
It is also important to be able to use the points you have accumulated at Webike.
[How is it used?
We consider that it can be used without any problem from playing in the mountains with friends to day-touring.
【Included Parts:presence or absence】.
A piece of skin for SeatBody, a tandem belt, and an instruction manual with simple tensioning instructions are included in the quantity.:Set
In this case, the Rear Carrier has a handle, so the Tandem belt is not attached.
[ITEMS TO BUY TOGETHER
Tucker (Stapler's slightly larger size) to hold the Seat fabric in place on the Reverse side of the Seat Base, and a shorter core for the legs (because the longer legs would poke through to the surface at the SIDE of the thin Sponge).
If you want to emphasize waterproof performance, you may want to cover the area between the SeatMaterial and the outer skin with Vinyl before applying it. If you do not want the skin to gap while running, it may be better to apply directly to the sponge without using Vinyl, and you should prepare a SiliconCoking agent to apply to the reverse side seam of the SeatMaterial.
Opinions and requests to Manufacturer.
If possible, several color variations would make it easier to match the car body color.
We would appreciate just having a set up for each car model, so please continue to sell as much as possible.
View detail
Fits: YAMAHA Axis 50, YAMAHA Axis 50, YAMAHA Axis 50, YAMAHA Jog (2 cycle), YAMAHA jogpochet, YAMAHA jogpochet, YAMAHA Axis 50, YAMAHA Axis 50, YAMAHA Axis 50, YAMAHA Axis 50, YAMAHA Axis 50, YAMAHA Apprio, YAMAHA Apprio, YAMAHA Jog Aprio Type 2, YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle)
harmony
Not OEM, but external product stopped gal oil leakage. View detail
We chose the Small Type to match the Handlebar.
I used to use the so-called Z2Mirror Bracket Type, but it was old and the rust was noticeable, so I replaced it with the Small Type. The small type is a little harder to see. View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI Z750 (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI ZX-10R, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZX-9R, KAWASAKI Z900RS
Gasket
The Slip-on Silencer is a great sounding device. The Slip-on Silencer makes a nice sound. View detail
Cheaper than OEM
Since it is not a fixed part but a consumable part, I decided to purchase a cheaper one.
And the fact that it was a WeBig special order was Plus.
View detail
Fits: HONDA ZOOMER(Ruckus), HONDA CUB etc., HONDA LIVE DIO, HONDA SMART DIO, HONDA TACT, HONDA MONKEY
not adjustable
quality is fine but mirror is not adjustable and is fixed on the stalk. packaged well and will look cool but not sure I'll be able to see out of them. View detail
Although the sheet of SDR was a complicated form, it was able to be stretched finely. The crease is made strongly in part and when disappears well probably for packing? A product of this sort becomes uneasy. I always think don't carry out not bein
Although the sheet of SDR was a complicated form, it was able to be stretched finely.
The crease is made strongly in part and when disappears well probably for packing? A product of this sort becomes uneasy.
I always think don't carry out not being needed side it will not understand anymore if it stretches firmly, but it stretches.
View detail
Fits: HONDA TACT, HONDA DIO, HONDA LIVE DIO, HONDA SMART DIO, HONDA ZOOMER
You can use it.
Installed on SPACY100.
I replaced the one that was on before because it was getting hard to see due to vibration.
The bracket is a bit long, but it is very easy to see and comes with a Rubber Cover to cover the Screws.
Two pieces Quantity:I am satisfied with this price for the set.
View detail
Fits: HONDA Sh MODE, HONDA PCX125, HONDA LEAD125
Repeat
Quantity in the previous vehicle:2pc, this is the first pc in a newly purchased vehicle.
The last two replacements were used for 10,000 km and 13,000 km respectively, and they did not malfunction or break, making them a safe repeat purchase.
As the product description says, it is compatible with High Speed Pulley. Is it a little Long?
I am using it on my PCX125 engine in combination with a DAYTONAHigh Speed Pulley and a KITACO Power Drive Kit Type X. I have not had any problems.
As the product description says, it is compatible with High Speed Pulley.
View detail
Fits: HONDA Sh MODE, HONDA PCX125, HONDA LEAD125
Reinforcement Type?Does it really make a difference? → Results
[How is it used?
In use.
PCX125 (JF28) I replaced the drivetrain on the suspension of the The DriveV Belt that I had originally put on felt like it was slipping somewhat. It had about 5000km on it since I last checked it. When I opened it up, the old one already had a crack in the valley and was already at the end of its life. Was it a little too late?
Was the one you received as per Image?
I liked Parenthesis better than Image because it was kind of, well, fibrous.
I was under the impression that I received a very good product for the price.
The side angles are totally different when compared to the OEM Drive belt.
The angle is much closer to vertical on this product. This product is much closer to vertical angle. I think so.
Was the installation difficult?
I thought it needed a little more Power to install than the OEM one.
I'm not sure if it's because it's new or not, but I'd suggest doing some preliminary research on youtube on how to do things with Tie Wraps before you go to work on it.
The first time I opened the Crankcase, I had a hard time getting it off. If you are going to do this, please use a T-type Box Wrench before you start. (I think it was 8mm) and Rubber hammer are recommended to be prepared.
How was your experience with it?
It has been driven about 100 km.
To be honest, I thought it wouldn't change that much even though it was a reinforced V-Type. Immediately after the replacement, it feels like there is no change.
But after about 10k miles it started to feel right, and it was clearly quicker and more fun at lower speeds. Maybe it's because it's new, but well, that's it.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None! Satisfied!
View detail
Fits: YAMAHA VINO [Vino]., YAMAHA VINO [Vino].
Back Mirror for ALBA VINO
VINO is active in the anime? Because it was
"Oh? A round Back Mirror would be nice too."
And
The price isn't that high either.
result
It looks good.
It looks good on the round APRIO
I think
View detail
Fits: SUZUKI LETS4, SUZUKI LETS4, SUZUKI LETS4
High Speed Pulley compatible
I replaced it at the same time when I installed the High Speed Pulley Kit.
After 12 years and over 8,000 miles of use, the OEMs still seemed to work, but I chose to go with the reinforced version because I drive over 60 miles every day to work.
There is no visible effect when installed, but the price is cheap and good.
I will have to run it to see how durable it is, but I'm hoping for the best.
View detail
Fits: YAMAHA JOG, HONDA LIVE DIO, HONDA SUPER DIO, YAMAHA JOG90, YAMAHA GRAND AXIS, YAMAHA AXIS 90
Worth a try when combining external products?
The BaseEngine is bored up and registered as a moped 2 class. When installing an OEM modified exhaust system or an external exhaust system, a liquid gasket was used to fill the misalignment, but it is not practical and durable. If you apply a small amount of liquid Gasket to this Gasket and match it, it will function well until the next maintenance. However, because it is not possible to overconfidence, it is better to think that it is a supplementary thing at the time of I Regular. Cospa is decided by individual subjectivity, so I cannot say. I am Repeater because there is no other choice. View detail
Consumables.
It has about 20,000 miles on it since the last replacement.
It's not a physical part, but I'm comfortable with this reliable manufacturer.
It's dirtier than I thought it would be and I'm going to replace it every 20,000 miles.
View detail
Fits: SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125S, SUZUKI Address V125S Limited, SUZUKI address V125, SUZUKI Address V125S
Piece missing or not.
The part has arrived but the bottles of oils are not there. Is this normal? Could you answer me. Cordially. The part has arrived but the bottles of oils are not there. Is this normal? Could you answer me. Cordially. translated by Google Translator View detail
Fits: HONDA DIO [Dio]., HONDA CUB [Cub]., HONDA monkey, HONDA DIO [Dio]., HONDA CUB [Cub]., HONDA monkey
Cospa is nice
I've been using it with SUPER CUBSTD without any discomfort although it's labeled for DIO. View detail
Fits: SUZUKI zzz, SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Address 110, SUZUKI Address 110, SUZUKI Let's 5, SUZUKI Let's 4, SUZUKI Let's 5, SUZUKI Let's 4
I'm happy with the costumer!
I used it on my ADDRESS110, and after 3,000km, I checked it, and there was a little bit of wear and tear I think it is acceptable The price is low enough View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R1100, SUZUKI GSX750F, SUZUKI GSX400, SUZUKI GSF1200S, SUZUKI GS1200SS, SUZUKI SV400, SUZUKI GSX-R400, SUZUKI GSX-R600, SUZUKI TL1000S, SUZUKI SV1000, SUZUKI TL1000R, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX400, SUZUKI GSX1400, SUZUKI SV650X ABS, SUZUKI GSX1100F, SUZUKI SV400, SUZUKI RF400
Filter outside OEM
I bought the Oil Filter at SV-X's first Oilfor Replacement!
It goes on without a problem, no length or change in length
You can't see the inside of the filter, such as the Material and the folds
I don't know, but I don't think it's a problem
Simple structure with no cautionary notes, unlike OEM
With SV, you can be very particular about these parts without hiding the filter!
If you are purchasing the Oil FilterSingle Body
I'm sure you're the one who will replace the Oil yourself
Filter and Filter wrenchCup at the same time
I suggest you buy it
The oil filter does not specify the outside diameter size
Take the Filter to a tool shop and change the Size
I bought a Filter wrenchCup to go along with it!
Wrench size is 68? 14 square inches
In UniversalWrench, which is sold at Home center, you can use
This Size is missing
Buying Wrench at a cut-off size is a waste of money
It is important to note that the
View detail
Very good
I reupholstered the seat cover It is quite a hard work
I also put on the Waterproof Cover, which I managed to stretch with the heat gun I did
View detail
Price is the name of the game, and it's cheap anyway!
I used to use OEM parts, but the price is a little cheaper, so I used to use ALBA's I bought the Filter
The installation was in good shape and straightforwardly installed without any problems
I will use it from now on and see how it looks when it is serviced because it is not visible with the cover on
View detail