Reviews
Fits: HONDA VFR800X Crossrunner, HONDA VFR800X Crossrunner, HONDA VFR800F, HONDA VFR800F
I understand it's for exclusive use...
I think it was indicated that it can be installed with Bolt On, but it took some modification to the HuggerMounting Bracket and the Chain Cover connection. View detail
I was mistaken.
I was mistaken. There was a protective film attached to the surface, which caused the film to have a wound and uneven coloring. It was a hasty mistake. My apologies. View detail
Fits: HONDA VFR800X Crossrunner, HONDA VFR800X Crossrunner, HONDA VFR800F, HONDA VFR800F
Original color painting
Original color paint installation Tricolor color is not easily done?
Mounting bolt is partially Stainless bolt&Aluminum bolt
Use
Bracket and Clip are painted thickly after chamfering.
Chain Cover is worth modifying
View detail
It can be installed without removing the Tire, but...
For some reason, the GSX-R1000R after 2017 does not come with a simple Hugger, and I bought it because I liked it design-wise anyway, saying it was essential to protect the suspension.
The installation was done without removing the tires for the time being, but since space is limited, a long Glasses Wrench was necessary.
It was able to be installed with minor adjustments in positioning, etc., but it was a challenge because there is a place to fix the nut inside the Hugger.
But it looks good, so I'm happy with it.
View detail
Fits: YAMAHA XSR700, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07 Motocage, YAMAHA XSR700, YAMAHA MT-07, YAMAHA MT-07 Motocage
Purchased because the area around the Rear suspension is very dirty when it rains.
It is effective because it reduces dirt.
Installation requires drilling holes with a 4mmDrill after mounting on both sides.
The position of the holes is determined by you,
It was fixed without problems on both sides with the included push rivet.
I wanted the OEM to make it this long.
View detail
Fits: INDIAN MOTORCYCLE FTR 1200, INDIAN MOTORCYCLE FTR 1200 S, INDIAN MOTORCYCLE FTR 1200, INDIAN MOTORCYCLE FTR 1200S
Inner fender
I have converted FTR to Fender Eliminator.
Inner fender installation
Left Side is installed by removing Bolt of Chain Slider.
Right Side attached to Swing Arm with Band
Double-sided Tape in front
Can be installed neatly.
View detail
![Rear Fender [Raceline]](https://img.webike-cdn.net/catalogue/images/47174/0254_TS.jpg)
Installed to prevent mud splashing after Fender Eliminator
I had a Fender Eliminator, so I had to take measures to prevent the disastrous mud from splashing up my back.
Changed to this product because I like the design and it covers the rear tire longer than the NORMAL.
Carbon Style, but with the drawback that it is ABS Plastic with a Carbon price...
I am satisfied that the mud splashing has been reduced, which was my goal...
Carbon Style...
Installed on GSR750
Looks good in person, and the desired mud splash protection is good.
I guess the only problem is price and quality...
View detail
Fits: KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R SE, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R
Double-sided tape does not have the right chili.
Fitted to reduce mud stains
AlcoholWipe and Double-sided Tape are included for easy attachment, and Plastic Rivet is also included.
However, it may be designed on the premise of Rivet, or when a tape is applied, it does not go all the way in.:Pair (for Left and Right) The chili in the "Chili" does not match.
The base fender is not a very expensive component, so it was opened up to make a Rivet stop, and the hole diameter is 4mm.
It is an effect, but it is better, but it is impossible to completely control the dirt.
View detail
Radiator protection.
The store put it on when the car was delivered, but during the break-in period it rained and I checked the Radiator during a break.
RadiatorBody is not contaminated and seems to be effective.
Installation requires drilling holes.
View detail
Fits: YAMAHA XSR700, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07 Motocage, YAMAHA XSR700, YAMAHA MT-07, YAMAHA MT-07 Motocage
Convenient and inexpensive
The Rear FenderExtension was very useful because the area around the Rear Suspension was very dirty in the rain, which was also caused by the Fender Eliminator. Also, the black color was not white enough, so I painted it red and it became a good one point accent. I was not sure if I could use the plasticrivet that came with the bike, so I used a strong adhesive to attach it. I have had no problem with the adhesive on my previous Motorcycle for more than 3 years. View detail
Carbon Look
[Usage]
I changed Front Fender and Rear brake air guide to Carbon.
I wanted to make the Rear Fender Carbon as well.
I bought this product because it is ABS but looks Carbon.
[Is what you received as Image?
The mounting holes are not circular and the BALI is quite noticeable.
However, once installed, it is hard to tell.
Was the installation difficult?
There are no particular difficulties, but the OEMFender's harness hold downs and other parts are separate components.
The Handling Instruction Manual must be read carefully. The instruction manual should be translated (not "Please type here").
The bolt at the back of the Fender is difficult to loosen and tighten, so a Ratchet and Universal joint will make it easier.
[Try it.
I am now satisfied with the front and rear Carbon Look.
[Included Parts:were they on?
All Included Parts:such as mounting Bolt, reinforcing Plate, and holding down Harness were present.
[Disappointment.
The flat part of the Chain Cover section is slightly undulated and visually a bit distorted.
I will hide it with Sticker.
(Point of installation and hang/Instruction Manual, availability and clarity)
When removing the OEMFender, the grommet that binds the Harness is hard to see and difficult to remove.
You can push it out by pinching it with radio pliers or other devices.
The instruction manual is a translation (good luck with that, as it is not to be typed here).
View detail
Essential Products
Installed on NC750X (2019, 2BL-RC90).
Installation was fairly easy.
This product is essential to protect the Rear suspension and seems to work well.
On the contrary, it is strange that there is no Rear Fender as a standard feature. Is this a bitter pill to keep down the price of Motorcycle Body?
However, the Center of Rear Fender and Tire are slightly misaligned (although this is not a functional problem), and the high price is a Minus factor.
View detail
![Rear Fender [Raceline]](https://img.webike-cdn.net/catalogue/images/47174/0480_TS.jpg)
Fits: KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR, KAWASAKI ZX-10R
Wow that's cool
It's a shame there are no instructions. Translation (please type here). View detail
This is a good choice for those who are concerned about mud splashing.
[How is it used?
I bought this because I was concerned about mud splashing on RadiatorCore and Engine due to the short OEM Front Fender.
It is used as an extension of OEMFender.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It's not difficult.
It is necessary to be able to remove the front fender. Also, it is necessary to drill a hole to hold the support for fixing the brake hose.
It is easy to install with double-sided tape as long as it is aligned correctly.
For those who are worried about falling off, Plastic Tapping can be used to fix it.
I am worried about it falling off, so I use tapping to fix it.
How was your experience with it?
I think it is effective in controlling mud splashes.
I've been using the Fender extension since the beginning, so I don't know what the effect is without it, but without it, driving in the rain and splashing mud would be pretty bad.
[Included Parts:were they on?
Multiple pieces of Plastic Tapping, Double-sided Tape (Cutting done), Installation Instruction Manual
[Was there anything that disappointed you?
There is a clear difference in the appearance of the OEM Fender in terms of color and surface finish, so there is quite a bit of an acquired feeling.
I'm sure it's a combination of Cost, but this is the only thing I regret.
[Others]
Do not rush to align the installation point or hang. Do not forget to clean and degrease the attaching surface. After attaching with double-sided tape, fix the tape securely and leave it for about one day.
Also, you have to remove the OEMFender, so you'd better check how to remove it beforehand.
View detail
Fits: KAWASAKI Z900 RS, KAWASAKI Z900 RS, KAWASAKI Z900
Easy to install, time-saving, inexpensive, and effective in preventing mud stains.
Simply remove the existing Fender bolt and use the included double-sided tape to align the bolt and install the included Rivet. However, it is recommended that you clean and degrease the area before applying the Double-sided Tape. I am sorry for the dark picture, but I am satisfied with the finished product and there was no interference with the tire or the car body. There was a slight difference in the surface finish between the existing Fender and the new one, but I think it is Level that you cannot tell unless you look very carefully. If you are concerned about it, I think it is enough to paint both of them with Primer surfacer and matte black color. It is different from the integrated type, but there should be no difference in the effect, and you don't need to store or dispose of the existing Fender, so I thought it would be a very cost effective Petit Customization. I would like to thank you again for providing such a great product. Thank you again for providing such a great product and please continue to provide great products. View detail
Fits: BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 R, BMW S 1000 R
Race ish atmosphere is outstanding.
Looks great, quality and good looking.Material:You can buy Carbon products for the price, but Material:If you can divide Plastic, it's a good buy. View detail
Fits: KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R SE, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R
BODY STYLE BodyStyle Rear huggerExtension
I bought it to keep the mud off my back when touring, and it did the trick.
It's just that Motorcycle is no longer dirty.
View detail
Fits: TRIUMPH Tiger 800 XC, TRIUMPH Tiger 800 XC, TRIUMPH Tiger 800 XC, TRIUMPH Tiger 800 XC, TRIUMPH Tiger 800 XCx, TRIUMPH Tiger 800 XCx, TRIUMPH Tiger 800 XCx
Dress-up and mudguard!
It looked plain, so I put Carbon Seat on the surface.
To install it, remove the Front Fender, and then use the Pin clip attached to the Es TensionFender? (4 → changed to 3.) After making a hole with the drill to fit the size of the tape, you can apply the attached double-sided tape.
After that, I warm up the Double-sided Tape in the Dryer and apply it to the Front Fender, put my weight on it and crimp it with my foot.
Then, make a hole in the Front Fender to match the hole in the ExtensionFender and push in the Pin clip to complete it.
View detail
Fits: TRIUMPH Street Triple, TRIUMPH Street Triple R
To make it look like a Single Seat.
I used it for Initial Model STREET TRIPLE. Since the STREET TRIPLE after the latter period has a Single seat cover because Tandem seat is independent, there is a setting of Single seat cover, but Initial Model and Tandem seat are integrated seat. I tried this Cover that can be covered.
The design is also very stylish, unlike some other Cover-like products.
Maybe if the price was kept a little lower, it would be easier to try it out.
View detail
Easy to install? The price is …
Installation is easy if you have access to tools
The Body was well packaged and the protective Vinyl on the surface was hard to remove! (；・∀・)
It's well dimensioned and cool
Like all Under Cowl's, I'm sure the price isn't too cheap Recommendation
View detail