Reviews
I think it's a little too Large.
The Cowl is easy to install because there is no modification, it is cheap to work with, and it is very helpful for the Large size change. View detail
One point
There are no special functions!
I think it's possible to have one point of coloring!
View detail
Very platePad
Heel plate is a place that is easily scratched by shoes, etc., so we recommend that you attach a pad to the heel plate.
Speedra's pad is Carbon Style with good texture.
Installation is as simple as attaching it.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CB1000R, YAMAHA YZF-R1, YAMAHA MT-10, YAMAHA YZF-R6, YAMAHA MT-09, YAMAHA MT-09 TRACER, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA MT-07, YAMAHA XSR700, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03, SUZUKI GSX-R1000, SUZUKI V-STROM250, SUZUKI GSX-R600, SUZUKI GSX-R750
Master cylinder cap
Changed from Green Light to Gold. View detail
It looks cool!
I changed from the OEM Exhaust Cover and am happy with the improved look.
No modification is required, and the Bolt can be used for OEM applications.
Recommended if you are buying for looks and not expecting weight savings.
However, I think the price is a little high for this ….
View detail
Fits: KTM RC390, KTM RC250, KTM 390DUKE, KTM RC200, KTM RC125, KTM 125DUKE, KTM 200DUKE, KTM 250DUKE
Clutch lever broken and replaced
The clutch lever was broken by a standing accident, so I thought it would be a good opportunity to replace it with a foldable one.
Brake, Clutch lever and Quantity:I think it is affordable for the Set. I am satisfied with the look and the production.
However, for some reason, the clutch lever moves vertically. It is not at a Level that interferes with operation, but it bothered me, so I installed KITACO's Spacer SIMM, which solved the problem. That is the only complaint I have.
View detail
Fits: KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2, KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2
SPEEDRAMaterial:Twill Weave Carbon glossy Drive chain guard
The installation was not particularly difficult and was done by replacing the OEM.:Twill Weave Carbon shiny and looks up, the shape is more rounded than OEMGuard. View detail
Fits: KAWASAKI NINJA H2SX, KAWASAKI NINJA H2SX SE, KAWASAKI NINJA H2SX, KAWASAKI NINJA H2SX SE
SPEEDRACarbon rear fender
I have installed the SPEEDRACarbon rear fender on my 25R and Z900RS and there was no distortion and the mounting holes did not have much gap, so I bought it for my H2SX. As for the installation, I had to install the OEM color in the upper mounting hole and fix it with the OEMBolt, but the hole was small and there was a gap from the center, so I had to use a semicircular bar to adjust the large hole position. But it was successfully installed. The other holes did not need to be enlarged and there was little distortion.:Pair (for Left and Right) The adjustment of the position of the material was done without any special attention.:Twill Weave Carbon glossy and cosmetic and looks better. The mud repellent effect may not be so promising…. View detail
Fits: HONDA VFR800, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR500R, HONDA CB500X, HONDA VFR800XCROSSRUNNER 125, HONDA CBR1000RR, HONDA CBR250RR(2017-)
Can be installed on the 2023 CB1300SF
The system is designed to attach all of the multiple carbon parts at once, and the peel-off paper (Transparent) The parts will stick to each other as soon as you peel off the "P". It is not recommended to work outdoors when the wind is blowing.
In the end, I gently peeled off each part and attached it while positioning it. The level of the sticking feeling is so-so.
View detail
Quite high quality
We have not taken into account what happens in the event of a fall from the beginning. (If it is just a standing fall, the Pannier and Frame Slider will be grounded, but not the Swing Arm.)
Therefore, although there was a cheaper Axle Slider that was a little smaller, I chose this product because I wanted a red undercarriage accent (since the wheel's rim tape is red, I wanted to unify the undercarriage accent in red).
I am satisfied, although it seems a little too large.
It would have been nice if Bolt was the same color, but I think I should have painted that much myself.
Incidentally, the compatible car models on Webike did not include the GSX-S1000GT, but the SPEEDRA webpage included the GT, and it could actually be installed without any modification.
View detail
It is a quality that makes it a Repeat!
The quality was identical to the product photo.
I bought a Manufacturer's first, but returned it because it fell a few steps short of the sample.
Comparing the two, Speedra would win except for its weight.
In terms of quality, it is close to HondaOEMOP's Dry carbon, and I guess the weight is the same etc.
It's more than twice the price, though, and since it's Matte, it's a plain girl.
After all, Material:Carbon Style beautiful here.
View detail
Fits: YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3
It is good for dress-up.
Good for Dressing,
Note that the screws on the YZF-R25 are easy to lick,
Use the + for #1.
View detail
Fits: HONDA VFR800, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR500R, HONDA CB500X, HONDA VFR800XCROSSRUNNER 125, HONDA CBR1000RR, HONDA CBR250RR(2017-)
Carbon Wind
I am happy with the tightened look.
The work is also easy, just paste it on.
It would be better if it were cheaper.
View detail
Fits: YAMAHA FZ6, YAMAHA FZ6 FAZER, YAMAHA FZ1, YAMAHA FZ1 FAZER, YAMAHA XSR900, YAMAHA XSR700, YAMAHA TMAX560/TECH MAX, YAMAHA TMAX530, YAMAHA MT-10, YAMAHA MT-09 Tracer, YAMAHA MT-09SP, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZ8, YAMAHA FZ8 FAZER, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25/MT-03
That's what SSK is all about!
[How is it used?
Used for Tandem or Dress-up
Was the one you received as per Image?
Was the installation difficult?
It's easy
How was your experience with it?
Good looking compared to OEM
[Included Parts:were they on?
None
[Was there anything that disappointed you?
A little overpriced?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Easy to install and easy to use
[How is it used?
Purchased for the custom look.
Was the one you received as per Image?
I felt it was better and more three-dimensional than it looks in the picture.
Was the installation difficult?
It was very easy to install as it was exactly the same shape as the OEMCover.
How was your experience with it?
Although the change is only for appearance due to look custom, I am satisfied with the change.
[Included Parts:were they on?
ManufacturerSticker is the Quantity:1 pc. and Installation Instruction Manual are included. Installation can be done easily by following the instructions.
[Was there anything that disappointed you?
If the part is a Quantity:2pc. I would have been happy to have two Stickers as well, since there is a Set.
Also, for better or worse, the Material:It only becomes Carbon Style, but the atmosphere by the shape change is the same.
View detail
Used for side cowl
Changed from Silver to Black, good because it is less noticeable! View detail
Fits: YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09 To Racer, YAMAHA FJR1300, YAMAHA FZ1FAZER, YAMAHA FZ6-SFAZER, YAMAHA FZ6R, YAMAHA FZ8, YAMAHA XJ6DIVERSION, YAMAHA XSR900
Looks like a Large thing.
Replaced the Brake master cylinder cap, which is functionally fine as long as it is not leaking, but I bought it in the hopes that it would look better than anything else. In that respect, it is a zero. However, the price is high, but I was worried about cheap ones, so I compromised. I am glad that the included Screw is a hex Type. Because the original +Screw was about to be licked. I am satisfied overall. View detail
Handlebar Brace
The length can be adjusted to accommodate a variety of motorcycles. View detail
Simple and cosy.
It is a solid and cost-effective version of the existing Fender Eliminator.
However, Reflector must be purchased separately.
Material:I also have a Fender Eliminator in Aluminum, but it is a bit heavier.
Ah! The box is pretty cool lol.
View detail
Fits: KAWASAKI ZEPHYR400 χ, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA, KAWASAKI ZZR600, KAWASAKI ZZR400, KAWASAKI ZZR250, KAWASAKI ZXR400, KAWASAKI ZX-9R, KAWASAKI ZRX400, KAWASAKI Z750S, KAWASAKI Z750, KAWASAKI W800, KAWASAKI KLE400, KAWASAKI EX-4, KAWASAKI ER-6f, KAWASAKI ER-6n, SUZUKI GSX250FX , KAWASAKI VERSYS, KAWASAKI BALIUS2, KAWASAKI BALIUS
good-looking
It looks better. There was a little rattling, but it works fine. View detail