Reviews
It purchased to 92 model JADEs. Although the completely same Mirror had been stolen only within the day which was inattentive and over which it did not cover a Cover, since it was very pleasing, he rebought it. He also likes looks individually
It purchased to 92 model JADEs.
Although the completely same Mirror had been stolen only within the day which was inattentive and over which it did not cover a Cover, since it was very pleasing, he rebought it.
He also likes looks individually and the field of view is also dramatically pleasing widely!
Please take care so that you are not stolen, either.
View detail
It is a time-tested mirror in for an offroad bike. It is used for XR250. When the motorbike was purchased, the other company's one was attached, but I exchanged to this immediately. There are many flexible movable mirrors f the other company, but the mirr
It is a time-tested mirror in for an offroad bike. It is used for XR250. When the motorbike was purchased, the other company's one was attached, but I exchanged to this immediately. There are many flexible movable mirrors f the other company, but the mirror I used before had problems that a viewing angle is narrow and it was difficult to check the back. This mirror has a wide-angle lens like a camera and a large viewing angle can be overlooked widely and it is easy to check the back. In terms of depth perception, since it is legible somewhat although I feel a sense-of-incongruity, it is not worrisome. Since both right and left can be used, even if the right is damaged, it is also an advantage that left one can be used for the right. To an OFF run, since it opens on a public road according to a situation and can fold up inside out of a public road, the breakage risk by fall is avoidable. As a minus point, adjustment of bundle condition is severe. A delicate bundle degree is required. If it is made to be easy to move and speed will be gathered, it will move by wind pressure. When it fastens, it may not move by wind pressure and it becomes impossible to fold up. Since the adjustment degree is severe, I always bring the spanner so that I can adjust at any time. If movable is used abundantly, the ball position will be exhausted gradually, and adjustment would be impossible. If so, it is time to change. On the off-road characteristic, since it folds up frequently, it is businesslike as consumption product. It is a cheap and legible, and easy-to-use best seller product. It is an OFF purveyor's mirror. I would like to use regularly forever from now on. View detail
Since it is lightweight and compact, I think that it is [ the breakage by fall ] almost reliable. , however the capability as a Mirror are low. It is hardly visible by vibration. Since it is compact, only its arm is almost reflected in a M
Since it is lightweight and compact, I think that it is [ the breakage by fall ] almost reliable.
, however the capability as a Mirror are low.
It is hardly visible by
vibration.
Since it is compact, only its arm is almost reflected in a Mirror.
View detail
It is used for TTR125. It is easier to carry out a back check than the Mirror for Off-road motorcycles which was being used until now [ ]. It does not move freely during a run. Also when it goes into a path through a wood, it can fold up immediatel
It is used for TTR125.
It is easier to carry out a back check than the Mirror for Off-road motorcycles which was being used until now [
].
It does not move freely during a run.
Also when it goes into a path through a wood, it can fold up immediately and is easy-to-use.
View detail
"AZ-101-8 is attached to Ape 100. A genuine mirror was removed with adapters and attached. Although the genuine round mirror blurred when speed was high, its back could not be seen and the role of the mirror was not carried out, after changing to this, a
"AZ-101-8 is attached to Ape 100. A genuine mirror was removed with adapters and attached. Although the genuine round mirror blurred when speed was high, its back could not be seen and the role of the mirror was not carried out, after changing to this, a back check can be done clearly. There is only a regular assortment and I think that texture, an operation position, a price, etc. are very satisfying goods. Appearance approached the motorcycle a little, and it is good." View detail
"Please compare with a genuine mirror. It is cool!! This price is cheap! However, since it is one piece, you need attention. Although I have used for one and half year, there is no damage and I think that it is good. The edge will be worn and paint applic
"Please compare with a genuine mirror. It is cool!! This price is cheap! However, since it is one piece, you need attention. Although I have used for one and half year, there is no damage and I think that it is good. The edge will be worn and paint application will separate in case of storage by a motorcycle cover. Near the nut of the root where an angle has rusted. I think that it is tolerance considering a price." View detail
Fits: HONDA Giorno., HONDA clair-scoopy, HONDA Giorno., HONDA clair-scoopy
I'm happy with received ALBA mirrors =) Quality is really good =) I've tested it a whole day today =) It is three times better than my old chinese)
I'm happy with received ALBA mirrors =) Quality is really good =) I've tested it a whole day today =) It is three times better than my old chinese) View detail
Since I wanted the one which can do positioning and fold a mirror, I purchased. Although it is satisfactory in general, it will loosen, if it does not fasten tightly.
Since I wanted the one which can do positioning and fold a mirror, I purchased. Although it is satisfactory in general, it will loosen, if it does not fasten tightly. View detail
The Plating of the portion (portion to rotate) which an Arm joins to a Mirror came off immediately. Moreover, although a Plating of the main part of a Mirror is still beautiful, although it was not a Rust, the Arm became, and the stripes of it were chang
The Plating of the portion (portion to rotate) which an Arm joins to a Mirror came off immediately. Moreover, although a Plating of the main part of a Mirror is still beautiful, although it was not a Rust, the Arm became, and the stripes of it were changed into the state of having been uneven, and it was wound around it. Kana to make into black .. View detail
"""TANAX shark mirror plating"" was attached to my own car. The cheap one which was attached before was too light, and since vibration did not function as a mirror, I changed to the ""shark mirror"" with expectation. This time, the turner position of the
"""TANAX shark mirror plating"" was attached to my own car. The cheap one which was attached before was too light, and since vibration did not function as a mirror, I changed to the ""shark mirror"" with expectation. This time, the turner position of the genuine mirror was used, and it offset and attached ahead. It maintains a balance with the upper cowl of Magical Racing, and I think that it was finished with the racy image. When it was this mounting arrangement, since it does not interfere with the tank of the master cylinder, it was just right. Furthermore, since it offset ahead, the back check became very easy, and also where the body is turned down, it became legible. As for the vibration to worry, it blurs so so. Probably, it has the influence, since a mounting arrangement, a handle, and bar end are exchanged for a lightweight external product. But since a specular surface is fairly large and the visual field is large, it is not worrisome up to there. Moreover, since it is an OPTICS mirror, it becomes easy to see regardless of day and night. It prevented from taking the hole of a bolt into pieces with a hezagonal wrench by putting the hole by a pate as the measure against a theft. But pliers may be able to be loosened, I use the wire lock for bicycles to the arm part and handle brace of the mirror at the time of parking. Comprehensive evaluation: There is a reasonably priced high grade feeling, and it is highly satisfactory. It is cool. If it becomes more reasonable to a slight degree, it is better. Therefore, it is 4 stars." View detail
It attached to the SuperCUB110 PRO. It was sometimes, and falling by the path through a wood or a snowy road thought it easy to carry out the Damage evasion and readjustment at the time of a fall it, and it purchased. Although the diameter of
It attached to the SuperCUB110 PRO.
It was sometimes, and falling by the
path through a wood or a snowy road thought it easy to carry out the Damage evasion and readjustment at the time of a fall it, and it purchased.
Although the diameter of
Mirror is almost the same as a Cub Pro, an overall length is a little short.
Since the Mirror which had overflowed Handle width for a while becomes almost the same as Handle width if pure, it passes through and end-comes to be easy.
It is a range which is not worried although the range which is in sight by
, however its part Mirror becomes somewhat narrow.
It is better to carry out an increase bundle periodically, since slack of a moving part may arise if the
run is repeated.
Since the degree of freedom of
movable range is quite high, positioning of a Mirror is simple also for pure lay.
I consider a thing since the
moving parts increased in number, and two 17-mm Spanners were required at the time of a bundle, when it loosens on the way, and consider that it is better to carry since an Adjustable wrench may be used.
Since the probability that a Mirror will move is high at the time of
parking when a Helmet is covered over a Mirror, he is trying to apply quietly.
If it is this price, even if it damages, it is not regrettable, but fortunately there is still no fall until it damages.
View detail
Since the portion of the upper ball is 17 mm, 14 mm and two tools (a total of 4) are needed. Since the size of the portion of a ball is not conventionally different from elegance after all, the kana which does not have a benefit of a miniaturization
Since the portion of the upper ball is 17 mm, 14 mm and two tools (a total of 4) are needed.
Since the size of the portion of a ball is not conventionally different from elegance after all, the kana which does not have a benefit of a miniaturization so much is thought, but an astringent Plating is rather smart.
I think or with considering a Cost, since the quality of the
Mirror is also satisfying enough.
View detail
[Webike Monitor] It attached to AB27 MONKEY at both sides for back field-of-view reservation. Since it is attached to the usual low position instead of a position, the Style of the whole is the impression which was easy coming it low to bec
[Webike Monitor] It attached to
AB27 MONKEY at both sides for back field-of-view reservation.
Since it is attached to the usual low position instead of a position, the Style of the whole
is the impression which was easy coming it low to become.
Although positioning whose
back is visible was a repetition of trial and error, it settled in the position it can be satisfied with a target of the position as a result of
.
In a direction to show as the whole
low, it is recommended.
View detail
Fits: HONDA CB400 SUPER BOL D'OR
It failed, although the Yellow was purchased, and chosen by my liking. Although it spread, since it is yellow, it is not dazzling in the field of view, but all the cars illuminate a yellow Fog light, and and distinction of a car body cannot attach it
It failed, although the Yellow was purchased, and chosen by my liking.
Although it spread, since it is yellow, it is not dazzling in the
field of view, but all the cars illuminate a yellow Fog light, and and distinction of a car body cannot attach it easily night. [ the field of view ]
Although I think that there are few kinds of Mirror and they are good elegance to
CB1300SB, since things and a double sided sheet with a high price have not cut, it is trouble for a while.
View detail
It influenced conversely and attached downward. appearance is preeminently good! Since it is a product made from a Plastic which cannot feel , however intensity, it blurs fairly. It is not fit for back check. A visual field is also narrow.
It influenced conversely and attached downward.
appearance is preeminently good! Since it is a product made from a Plastic which cannot feel
, however intensity, it blurs fairly.
It is not fit for
back check.
A visual field is also narrow.
, the place which ran the path through a wood violently, and the knee kick were put in, and it broke.
Not
practical use but appearance.
It is what for the time being.
A certain amount of reasoning is required.
View detail
Although the Mirror area which he wanted the same model as a boa Ace number, and it purchased is small, its sharp touch is very good. Since it was a Blue mirror, the high grade feeling came out again.
Although the Mirror area which he wanted the same model as a boa Ace number, and it purchased is small, its sharp touch is very good.
Since it was a Blue mirror, the high grade feeling came out again.
View detail
The same thing is attached to right and left. There are three kinds of screw and it was attached to SR400 without any problem. A mirror part is large, and back is very easy to see. Since there is a weight, it may be strong to vibration. Although there are
The same thing is attached to right and left. There are three kinds of screw and it was attached to SR400 without any problem. A mirror part is large, and back is very easy to see. Since there is a weight, it may be strong to vibration. Although there are a little rude structure, it is satisfactory enough in this price. As an oval position is symmetrical, if it turns, an image will change a liitle. View detail
One article of the impression of structure polite to the whole. once Ball-joint part has also become tight exactly and determines an angle -- -- it does not shift in a little thing.
One article of the impression of structure polite to the whole.
once
Ball-joint part has also become tight exactly and determines an angle --
-- it does not shift in a little thing.
View detail
It is a Mirror of structure black to details and better than a price. Although it was for 1 Inch handles, the Rubber was rolled and it attached to the wheel of a domestic car.
It is a Mirror of structure black to details and better than a price.
Although it was for
1 Inch handles, the Rubber was rolled and it attached to the wheel of a domestic car.
View detail
it is attachment to Ape. Although there are two places to fix by a tool and adjustment is trouble a little, I like its form. As a mirror position, it becomes inside a little from the grip end of a handle. As for how to be visible, the half of a mirror is
it is attachment to Ape. Although there are two places to fix by a tool and adjustment is trouble a little, I like its form. As a mirror position, it becomes inside a little from the grip end of a handle. As for how to be visible, the half of a mirror is visible. View detail