Reviews
It's a bit expensive
I think this price is a bit high for Valve, but it's cheaper than OEM and I don't blame them. It lights up fine, but I'm not sure how durable it is. View detail
Fits: HARLEY-DAVIDSON Universal
To Lucas type
The light cover will be melted if it is not used for the Type which has a short base like the Lucas Tail Lamp.
The length of the ball was the same compared to the ball that came with LucasLight, so I don't think this will solve the Cover when the ball runs out.
View detail
Fits: HONDA SUPER CUB 50, HONDA GYRO CANOPY, HONDA Universal, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
To Our Safety Riding, Bright the Light!
ENG: This is most easy way to your bike Bright Tail light bulb why dont you try this more Bright then original bulb, more anti biverate worry, and less use voltage be advice... if you install this bulb and test the stop swith from right handle lever and foot brake pedal, if its not working, try up-side-down install then its working i was embarrassed ... haha KOR: Takegawa LED bulbs. The LEDs are white anyway, because the tail light itself is red, so it shows a bright red light, but thanks to the white light in between, it acts as a license plate light and is very bright. It will work. It probably has polarity. There is no fear that the filament of a typical halogen light bulb will break due to the vibration of a motorcycle. View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Contact failure occurrence
I bought it in 2015, when was that?
I noticed that it was not lit.
When I looked at it, I saw that the contact point of the base was gapped.
I put it back in the bulb.
It's too sad to throw it away like this (laughs)
Recheck the status.
If you turn the base, it will fit at the contact point.
There's a rattle or a wobble or something.
I fixed it with Epoxy Glue (lol) and it stopped moving.
Motorcycle is also a Regulator issue.
I don't plan on going LED any more than I have to.
Let's use what we have.
Ordered another one to use on my MC19 or 1KT (lol).
They both have a W in Tail.
But this time, I'll use Epoxy to harden it beforehand (laughs).
View detail
Buy as Stock
I think it's the same as OEM, I haven't used it because it's stock, but I'm sure it will work fine. View detail
Fits: HONDA SUPER CUB 50, HONDA GYRO CANOPY, HONDA Universal, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
Replace Stop-lamp with LED
I replaced the Stop-lamp on my 2004 LITTLE CUBCarburetor Vehicles.
When I noticed that the Position was not lighting up, I had a Motorcycle shop look at it and they said that there is a difference between AC and DC, so just replacing it will not light up the Position.
I asked him to tweak the Wiring around the Battery and it lights up fine.
The length of the Lamp insert is too long, so it doesn't fit the Snap and I was worried that it might come off wobbly.
If you stick it with Vinyl Tape or leave it as it is and a problem comes out, if you replace the insertion port of the LITTLE CUB side, it will be Large durable.
I think it's a bit dark, but I'm no longer worried about the ball breaking, so we'll see.
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
very good
I bought this to convert my SL90 to 12v.
I used to make LED bulbs by myself, but nowadays it is faster to buy them.
This product is very good because the back part of Lamp is Red color and the part of License Plate Light is White color.
License Plate Light is too white, so it would be better if it is Amber color.
View detail
Defective products are mixed in.
There are about 3 defective products out of 10.
Tail and Brake are mixed in with each other.
The unit price is low, so the rating is 2.
View detail
Fits: その他
LED for Tail and Number common lights
[How is it used?
The tail lamp bulb was broken, so I decided to change to LED which I had been thinking for a long time.
Since it's an older model, the Number lighting is white and the Number lighting is a bulb color model.
Was the one you received as per Image?
As shown in product photos.
Was the installation difficult?
Simply remove the Tail lamp lens and replace it with an OEM bulb.
Easy to replace with just the Driver on-board tool.
How was your experience with it?
Brighter than OEM but not too bright and no flickering.
Maybe it's because the luminescence color is now Red, but it looks more distinctly Red than the OEM bulb.
Visibility in daytime seems to have improved somewhat.
[Included Parts:were they on?
Only the base paper and a simple Instruction Manual.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
As the description says, the part number that fits the Tail Lamp Bulb changes depending on the Socket orientation of the Tail Lamp Bulb, so it was a bit of a hassle to check (but I had no choice).
View detail
Badly built and dark.
I installed a Yamaha TDR80 with 12V electrical system.
When I applied force to install it, the LED installation board part caved in and spun around in the middle of the Valve, damaging it.
The parts are only connected with a Glue gun, so it will come off with a slight force.
Fortunately, there was no wire breakage, so I was able to repair the part by putting it back in position and fixing it with instant glue.
It's bright, but honestly, it's dark.
The original Xenon sphere seems brighter.
The LEDs all light up, so it doesn't seem to be a defective product.
The power consumption is low, as you would expect, and there is no flickering with all the lights on as the Blinker blinks.
I plan to use it until I replace it with another high light one.
View detail
Fits: HONDA SUPER CUB 50, HONDA GYRO CANOPY, HONDA Universal, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
LED!
I used it on my '11 SUPER CUB110 (JA07). It's very convenient to replace the LEDs with LEDs, because they have a super long life against Halogen. View detail
Durability is difficult
Used in the tail lamp of Off-Road Machine for a little over one year and three months. 。 It's broken.
Is the gold-mouth part and the light-emitting part unglued? We have separated them.
Durability at a price! I guess that's what it's all about....
View detail
Fits: HONDA SUPER CUB 50, HONDA GYRO CANOPY, HONDA Universal, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
LED peace of mind
When replacing a broken Tail Lamp Bulb on a LITTLE CUB
Purchased and used.
At a price that is many times more expensive for an LED bulb than a regular bulb
Yes, but the Tail/Brake bulb is out.
It may be difficult to notice that the KIP is poorly maintained and
It's boring to be cut off, so I bought the peace of mind.
Easy to install because it is only exchanged with the NORMAL bulb.
It is
Visibility is also improved because the color comes out brightly with "HADRILL
I'm sure you do.
View detail
Purchased out of a ball
I bought it because the Tail lamp ran out of bulbs.
We'll see how long it lasts, etc. Be careful not to touch the bulb with your bare hands, as the grease from your hands will break it when you install it.
View detail
Fits: HARLEY-DAVIDSON Universal
It's a consumable item.
Don't worry, it's just a regular Valve.
These parts are expendable. If it doesn't work, change it and that's it. As long as you don't buy an extreme outlier, I think you can choose a cheap one.
View detail
Fits: KAWASAKI ELIMINATOR 125 , KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, HONDA FTR223 Tricolor, HONDA FTR223 DELUXE, HONDA FTR223 Standard, KAWASAKI ESTRELLA, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI W650 (Handlebar Up TypeSpec.), KAWASAKI W400, KAWASAKI KSR110, KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI VULCAN 900 CLASSIC , KAWASAKI VULCAN 900 CLASSIC , KAWASAKI VULCAN 900 Custom
As a walking stick to keep you from falling
I've started riding Motorcycles with more thought to prepare myself to protect myself than I used to
When the Stop lamp goes out on the road, especially at night, it is highly likely to lead to an immediate accident I found out when I came across an accident at a Touring destination
The person who was in the accident also noticed that the Lamp was out, but there is no replacement and Large will be strong It seems that it was a rear-end collision just as he was getting ready to say "I'm sorry, I don't know what happened
At worst Blinker is a hand signal and Head lamp is a high beam (Large is usually a low beam.) It is possible to substitute by adjustment, but because Stop lamp cannot be substituted, it is necessary to carry it as a minimum spare I did
It is packed in a small plastic container, which is sold at 100-yen or fishing tackle You can also store the Headlamp if you have been using it for quite a long time
We see quite a few elderly people driving cars these days, and the aforementioned accident was also the one that hit them By Elderly Mark 'I had no idea what Motorcycle's Brake was He talked about it
I don't want the Lamp to run out, it's easy to replace it if you have it, so think of it as a wand that you can't fall back on Prepared
(LED is also good, but there are also LEDs that suddenly stop turning on, so I dare to use Regular The ball is safe.)
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
I like that the License Plate Light is white
LED Bulb with Red Tail and Stop and License Plate Light I was looking for a white one and this is what I found, so I bought it
I can't help but feel that it's more expensive than the cheaper Chinese ones, but there are few other options So it's no use
The base is so thick that it makes contact with the Reflector, and you can't turn it by pushing it in a little too hard And I couldn't install it This seems like it would be a problem in other cars …
Unlike the Headlight, the BENLY50 is a 12V system with the Tail via Battery No flickering and brightness seems to be a problem
I'd be grateful if more of these things were cheaper, but the car model standard these days isn't Valve It's an LED Unit and the demand for Valve may be low In the case of a motorcycle that doesn't generate much electricity, the power saving effect of an always-on tail is very small I think it's Merit, too
View detail
OEM Parts for Repair
Because the tail lamp of SUPER CUB110 JA07 was broken, I replaced it with the for Repair I did
A broken tail lamp can be dangerous at night, and you could end up in the hands of the police It is
It is always a good idea to keep a spare in the car
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
It doesn't feel like it's custom made at all
The external tail went bad and (Lenses dropped out on the cheap.) I had no choice but to go back to OEM, and since it's OEM, there's no chance of dropping out, but I'm back to NORMAL!
External Tails are getting cheaper, but they're still not getting cheaper despite being Bulb Type
View detail
It's broken
After six months of use, the body has finished splitting in two from the mounting area
I changed to LED in order to avoid running out of bulbs, but I didn't expect the body to be broken
View detail