Reviews
M-930 Helmet
About the feeling of use Very confirtable Cost performance and comparison with other products Fair for the money About shipping and packaging fast shipping no way to dammage View detail
LEAD Industrial Optional shield Color:Gray
I purchased this as a ReplacementShield for White/Red for ApeRate.
The standard is [Color] I replaced it with Fashion because it is Clear,
I like it because it looks like Visor when the Shield is splayed all the way up.
View detail
Postscript to postscript!
You probably think that a helmet is something that someone else is using in direct contact with your skin, and that there is no reason for someone to steal such a thing. The idea of a thief is that he/she wants a helmet for a Tandem person. So don't think that because the helmet is large, it is durable or that the probability of it being stolen is low. View detail
Postscript.
In my opinion, the screws of this Helmet lock are Large, which is an oddly soft material. In my opinion, the screws that fasten the Helmet lock are Large and are made of an oddly soft material! Therefore, it is safer to work with caution and take it easy or Shop.
Helmet locks themselves may be inexpensive, but helmets are expensive, and if they are stolen, you will not be able to get back on your motorcycle.
View detail
I was relieved that it was as good as I imagined.
The vehicle used is z900RS.
Due to the convenience of installing the Side Back on the opposite side of the Exhaust System. The existing helmet holder could not be used.
Then, I thought of for Tandem, Helmet holder.
It can be installed on the opposite side of the existing helmet holder.
This product has arrived. It looks the same in appearance as the existing OEM product.
I wondered if the existing helmet holder could be attached to the bracket as it is, and it did so without any discomfort.
In other words, the Helmet holder that can be used with the Engine key arrived on the opposite side of the existing one.
View detail
It's priced right.
Cosmo
It fits in the Helmet in of LEAD125, although it is a Limit.
View detail
It takes hang to tighten.
With a diameter of 22mm, it was installed on the Pipe of SP Mukawa's Carrier.
I had to bite down on the Rubber to tighten it, but it was very hard and difficult.
I think the role as Helmet holder is not a problem.
View detail
Ease of use unique to Exclusive Design
[How is it used?
RC42 has a Helmet holder if you don't remove the Seat.
It was inconvenient when I was on the road because I could not use it. I was looking for a product that was easy to use, and I found this product and purchased it with high expectations for its exclusive design.
Was the one you received as per Image?
Almost as per the Image.
Was the installation difficult?
Installation was very easy!
The only tools used are +Driver and 5mm and 6mm Hexagonal Wrench.
How was your experience with it?
Balance varies slightly depending on the type of helmet.
It is a Level that is not a problem.
[Included Parts:were they on?
The key is Quantity:Includes 2pcs. Includes a helpful Instruction Manual.
[Was there anything that disappointed you?
None in particular.
View detail
Slightly difficult to install, but functions well
Helmet holder for retrofit type.
Demerit is that it doesn't come with a key from the beginning like Kawasaki does these days...
It is 100 times better than hooking up to a Tandem seat.
Functionality is adequate.
There is a slight problem with the installation, because the Bolt that holds the Plate is close to the body of the car,
In a normal hexagonal Wrench, Quantity:Only 1 pc out of 2 pcs could be tightened.
I think it can be tightened by Offset wrench etc. because there was a gap of about 20mm when I temporarily tightened it by hand.
Also of note, this Helmet holder uses the Bolt hole on the back of the Tandem Footpeg.
Since these are probably bolt holes for installation of OEM SoftSide case brackets, it is necessary to confirm whether they can be used together or not.
View detail
![[K・TOUR] Helmet Holder](https://img.webike-cdn.net/catalogue/images/97787/80x564x28030xa0_TS.jpg)
I think I got the wrong model number….
I don't know if I got the year wrong, but I couldn't fix it with 2 points, but with one bolt, so I'm a little worried. I am satisfied with it. View detail
Too expensive
Purchased based on the photo alone. The real thing is quite flashy. The environment is sunny and cloudy regardless. Glaringly Sensitive." is awesome. Tastes differ, but I personally think that Silver's [Color] I regret that I should have bought the Smoke one. 。 Still, the delivery time was slow and the price was high. Cost performance was not good.
Lastly, the durability of the coating on the surface remains a concern. According to the instruction manual, maintenance of stains is OK only under running fresh water. I wonder how long it can be used ….
View detail
in jeopardy
Flash mirror [Color] Purchased Clear. When backlit, my face appeared on the entire backside of the Shield and I was in danger of losing my vision.
When backlit, the back side is also Mirror. It is dangerous, so it was removed after one Touring and became Garbage.
View detail
![X-ROADII FREE RIDE[XRoad2 Free ride]Helmet](https://img.webike-cdn.net/catalogue/images/109872/std-x-road2-fr-kamo_TS.jpg)
Parenthesis is good, texture and function are good!
The construction is very solid and the texture is nice. Above all, the design is Parenthesis!
The entrance is a little bit narrow when you put it on, but once you put it on, there is no problem.
It is just a little heavy. If it were a little lighter, I would give it a perfect score.
View detail
Helmet lock
I had been thinking about installing the Helmet Lock Holder, but finally decided to go with METALGEAR, View detail
Can also be installed on the GSX-S1000GX.
[How is it used?
In the photo, I used a helmet, but I was concerned about the load on the chinstrap, so I installed a wire lock and used it to lock the seat bag.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It was easy to install by simply removing the Bracket from the Tandem Footpeg.
The Bracket is quite heavy, so recommends that you remove it while holding your hand on it.
How was your experience with it?
I am satisfied because I don't have to take off the tandem seat any more because I don't have a helmet holder.
[Included Parts:were they on?
Key Quantity:2pcs and Instruction Manual, 2 KIJIMASticker
[Was there anything that disappointed you?
I was expecting to be able to convert it to one-key, but the keyway was the opposite type from the vehicle. If you want to convert to one-key, it is difficult to purchase on Net.
[Availability and clarity of the Instruction Manual
Even the Torque value of the BracketBolt of the Tandem Footpeg was kindly listed.
[Opinions and requests to Manufacturer
The GSX-S1000GT and RearSub-frame seem to be the same and can be installed. We would appreciate it if you could add it to the list of compatible models.
View detail
Blue is this color.
I purchased Titaniumium blue in Semi-smoke.
I like that it is Mirror so it is hard to see the line of sight from the outside.
[Color] Because it is Smoke, it seems to look a little dark at night, but it is not a Level that is particularly bothersome.
I think it would be better to refer to the ManufacturerHP, as the appearance seems to vary quite a bit with respect to the exterior color.
However, it seems that Blue and Orange are reversed on webike's product page compared to the ManufacturerHP ….
View detail
The construction is very good, but when you actually use it, it is very difficult to use.
The make is very good and looks OEM 。 I put it on my MOTO GUZZI which does not have a helmet lock, but it is attached without any discomfort. 。 However, in actual use, the helmets touch the exhaust system because of the low position of the helmets. View detail
Very light
It felt light the moment I held it.Material:The price is reasonable for carbon and it looks cool. View detail
Direction of opening and ease of use as desired
I wanted a helmet holder that could be mounted with the open/close hook facing vertically, and that could be opened on the top side.
After installation, the upper hook opens from an oblique position so that the helmet is stable and secure without fear of falling off.
The design blends in with the car body and is unobtrusive and easy to install.
I'm glad I installed it.
Large was active in Touring immediately.
View detail
I am very satisfied
Installation of the product is very easy. Also, the delivery of the product is very fast, and the product description page and configuration are the same. View detail