Reviews
Fits: KAWASAKI Z750FX-1, KAWASAKI KZ1000MK-2, KAWASAKI Z1000J, KAWASAKI GPZ1100F, KAWASAKI Z1000R, KAWASAKI Z1100R, KAWASAKI Z1100GP, KAWASAKI KZ1000MK-2, KAWASAKI Z750FX-1, KAWASAKI Z1100GP, KAWASAKI GPZ1100F, KAWASAKI Z1100R, KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI KZ1000MK-2, KAWASAKI Z750FX-1, KAWASAKI Z1100GP, KAWASAKI GPZ1100F, KAWASAKI Z1100R, KAWASAKI Z1000R
Stud Bolt gets tired when removing and installing the Exhaust System.
If you frequently remove and install the Exhaust System, or if you ride the same motorcycle for a long time, is it a consumable item that you cannot avoid? I think it's a consumable item that can't be avoided if you frequently remove and replace the Exhaust System.
It is Stainless and seems to be rust resistant. If you are unable to do so, it would be safer to have a motorcycle shop do it for you.
View detail
[webike monitor] Although the floating which is different until now was attached, this product was seen, and it fell in love at first sight, and opted for purchase. It is satisfied with the reliability of strengthening of attachment.
[webike monitor] Although the floating which is different until now was attached, this product was seen, and it fell in love at first sight, and opted for purchase.
It is satisfied with the reliability of strengthening of attachment.
View detail
Fits: KAWASAKI KZ1000 Mk-2, KAWASAKI Z1-R, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI Z750 FX
Best product for Utani
It took me about a month and a half to finally receive my order, and I bought it in time to replace my 6V MONKEY/GORILLA Main Harness and multi-system fuse box with a RiproManufacturer multi-system fuse one from a shop that had a bulky wiring kit. (I've compared Update-type Harness, but pmc is the best) I'm not sure if this is a good idea or not, but I'm not sure if it's a good idea. I'm going to Yahoo! I'm not sure what to make of it. If the Engine is the heart, the U-turn is the brain, so I think it's good to have something like this even if it seems expensive. The only thing I'm worried about is whether or not I'll be able to get a Rubber and Band later on, though I'm sure there are many replacements. The only thing I'm worried about is the availability of Rubber and Band. View detail
Fits: KAWASAKI GPZ900R NINJA, KAWASAKI GPZ750R NINJA, KAWASAKI GPZ900R NINJA [Ninja]., KAWASAKI GPZ750R NINJA [Ninja]., KAWASAKI GPZ900R NINJA [Ninja]., KAWASAKI GPZ750R NINJA [Ninja].
It's harder to get around than I thought it would be.
I installed the Drive chain roller slider for the first time.
I introduced it because the Bolt on the back of the footpeg interferes in two places (17Inch?).
It's a Bolt On product because it has a Knight's Down tube and Rear Sets. (I heard that this tightness is a manufacturer's standard.
I hear it gets better the next time. If you are a first time buyer, please refer to this page.
When the Roller is shaved, Red powder is naturally produced.
View detail
good
I used it on my Z series Rear
I wanted to mount the Caliper to the underside, and even more so, I wanted to make it a rigid mount I was looking for a short size Torque rod
With the shortest cooking, the distance between the center of the hole and the center of the hole was approximately 270mm, so Caliper's position is now just below us
I'm very happy with the position I've found myself in
I chose Silver and the Design is perfect
View detail
Sanctuary roller
This has a 10mm hole, one of the few rollers that has this measurement. Its well put together and you can regrease the bearings. Its quiet and is between a soft and hard material. Some vibration but will get better once its grooved. Its wide enough to incorporate a chain that may be off center where as a narrow roller may give you issues. Conclusion: this a well made roller and recommend. View detail
Fits: KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI KZ1000MK-2, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI KZ1000MK-2, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI KZ1000MK-2, KAWASAKI Z1, KAWASAKI Z2
Quantity : 2pc. Purchase eyes
Quantity : 2pc. It is a purchase of eyes eye. Last purchase was for Brake Master but this time I bought this SANCTUARY Sanctuary Master Reserver Tank Bracket for Clutch Master. In order to bend to an arbitrary position, the last time it warmly bent at a stretch, because Black Anodized peeled and discolored, it was bent slightly at a time to position it.
It was successful this time.
View detail
Fits: KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI KZ1000MK-2, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI KZ1000MK-2, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI KZ1000MK-2, KAWASAKI Z1, KAWASAKI Z2
Purchase
I exchanged from Nisshin's Tank Bracket. Tank Bracket positioned from the beginning is sold from various places, but Cowl - I bought this product by bothering me with interference with Inner cowl and tried to bend it to an arbitrary position by myself. View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZRX400, KAWASAKI ZRX400, KAWASAKI ZEPHYR400 [Zephyr]., KAWASAKI ZEPHYR750 [Zephyr]., KAWASAKI ZEPHYR1100 [Zephyr]., KAWASAKI ZRX400, KAWASAKI ZEPHYR400 [Zephyr]., KAWASAKI ZEPHYR750 [Zephyr]., KAWASAKI ZEPHYR1100 [Zephyr].
It attached to ZEPHYR1100.When the Blinker stay which can use the loading hook is looked for, this hits.Even if it sets most after , there is also no interference with a Blinker, and it is good touch. (the Blinker of a photograph is a Long sta
It attached to ZEPHYR1100.When the Blinker stay which can use the
loading hook is looked for, this hits.Even if it sets most after
, there is also no interference with a Blinker, and it is good touch.
(the Blinker of a photograph is a Long stay of a POSH Middle-machined Blinker.)
Although it is expensive, structure is solid and there is a high grade feeling.It was good to buy it.
It is conversely rigid too much and the ball piece of a Blinker becomes anxious.Or [ that LED-izing is required ]?
View detail
Fits: KAWASAKI GPZ900R NINJA, KAWASAKI GPZ750R NINJA, KAWASAKI GPZ900R NINJA [Ninja]., KAWASAKI GPZ750R NINJA [Ninja]., KAWASAKI GPZ900R NINJA [Ninja]., KAWASAKI GPZ750R NINJA [Ninja].
The same goods purchased those with three company, and made in [ including Nitro / which are likely to have intensity most in it ] Nitro in the volume retailer. It was the atmosphere which the other 2 company had thin thickness and form of the stay part
The same goods purchased those with three company, and made in [ including Nitro / which are likely to have intensity most in it ] Nitro in the volume retailer.
It was the atmosphere which the other 2 company had thin thickness and form of the stay part where a Guide roller is specifically attached, or processed the several millimeters aluminum board.
Although it was cheap about thousands of yen in price, since it was a portion which always contacts a Chain when running, made in [ which is likely to be excellent in intensity ] Nitro was chosen.
Anodized processing is also carried out and texture and functionality are places called an expected passage.
Since Pons attachment cannot be performed unless a Side stands sensor removes, it is attaching by removing.
At the time of departure, it is a check required about a STAND.
I have equipped with the Wheel of 5.5 pieces and have offset the Chain line 8 mm again.
I think that it was good in that there are some spans of adjustable range since it was touch that the Chain was just before the outside of a Guide roller.
it is satisfactory if Wheel width is 5.5 or less -- it is -- although -- some processings are likely to be needed if it is more than this.
Although it is a Side stands stopper, it has interfered in the
last splendidly.
It is coped with for the time being using the Stay of L character which is sold at the Home center for this reason.
Since there seems to be no problem for the moment although it is in this state one month or more, I would like to cope with it gradually.
View detail
When attached, the circumference of rear one felt it refreshed.
When attached, the circumference of rear one felt it refreshed. View detail
Fits: KAWASAKI GPZ900R NINJA, KAWASAKI GPZ750R NINJA, KAWASAKI GPZ900R NINJA [Ninja]., KAWASAKI GPZ750R NINJA [Ninja]., KAWASAKI GPZ900R NINJA [Ninja]., KAWASAKI GPZ750R NINJA [Ninja].
Although the quality of a fixing system or a Roller came out strongly and was very well, if it did not cut whether the attachment part of a Side stands sensor would be bent, the big issue which is not attached and made generated it. Attachment was given
Although the quality of a fixing system or a Roller came out strongly and was very well, if it did not cut whether the attachment part of a Side stands sensor would be bent, the big issue which is not attached and made generated it. Attachment was given up tearfully. it is because it runs with STAND appearance carried out and there is a danger electrical of an accident. Please sell the transfer Bolt on parts of a Side stands sensor. View detail
Fits: KAWASAKI GPZ1000RX NINJA, KAWASAKI GPZ900R NINJA, KAWASAKI GPZ750R NINJA, KAWASAKI GPZ1000RX NINJA [Ninja]., KAWASAKI GPZ750R NINJA [Ninja]., KAWASAKI GPZ900R NINJA [Ninja]., KAWASAKI GPZ1000RX NINJA [Ninja]., KAWASAKI GPZ750R NINJA [Ninja]., KAWASAKI GPZ900R NINJA [Ninja].
Stud bolts were also exchanged at the Overhaul term. becoming the panel of the Stud bolt not separating but buying a Stud bolt remover -- -- although it became unexpected expenses, it becomes beautiful, and I also change appearance and regard it
Stud bolts were also exchanged at the Overhaul term.
becoming the panel of the
Stud bolt not separating but buying a Stud bolt remover --
-- although it became unexpected expenses, it becomes beautiful, and I also change appearance and regard it as good.
View detail
Fits: KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI KZ1000MK-2, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI KZ1000MK-2, KAWASAKI Z1, KAWASAKI Z2, KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI KZ1000MK-2, KAWASAKI Z1, KAWASAKI Z2
He thought that it was this since the Stay of the Black was looked for, and it purchased. Since it was the Aluminum, it was easy to bend, but the form was made from warming with a Dryer once and bending slowly with two Drivers. Don't if [ good for t
He thought that it was this since the Stay of the Black was looked for, and it purchased.
Since it was the
Aluminum, it was easy to bend, but the form was made from warming with a Dryer once and bending slowly with two Drivers.
Don't if [ good for the vehicle type which is likely to hit the
Cowl ]?
View detail
[Webike Monitor] Unlike a free Rear caliper support, a Parenthesis is good special. The place equipped with the Torque rod is conspicuous by a solid! A Bolt is also and it is using the potato. I think that good shopping was carried out.
[Webike Monitor] Unlike a
free Rear caliper support, a Parenthesis is good special.
The place equipped with the
Torque rod is conspicuous by a solid! A Bolt is also and it is using the potato.
I think that good shopping was carried out.
View detail
Unlike a free Rear caliper support, a Parenthesis is good special. The place equipped with the Torque rod is conspicuous by a solid! A Bolt is also and it is using the potato. I think that good shopping was carried out.
Unlike a free Rear caliper support, a Parenthesis is good special.
The place equipped with the
Torque rod is conspicuous by a solid! A Bolt is also and it is using the potato.
I think that good shopping was carried out.
View detail
Fits: KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI Z750FX, KAWASAKI KZ1000MK-2, KAWASAKI Z2, KAWASAKI Z1
Although the thing made from a Webike Monitor certain Aluminum was used, there is no feeling badness when surely it binds tight. It is closed with the Snap and there is sense of security. It is recommended.
Although the thing made from a Webike Monitor
certain Aluminum was used, there is no feeling badness when surely it binds tight.
It is closed with the
Snap and there is sense of security.
It is recommended.
View detail
Fits: KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI Z750FX, KAWASAKI KZ1000MK-2, KAWASAKI Z2, KAWASAKI Z1
what can you say, spaced out top shock mounts ready to go. you can't make them for this price. work well, look awesome.
what can you say, spaced out top shock mounts ready to go. you can't make them for this price. work well, look awesome. View detail
Fits: KAWASAKI Z1-R2, KAWASAKI Z1-R, KAWASAKI Z750FX, KAWASAKI KZ1000MK-2, KAWASAKI Z2, KAWASAKI Z1
The shock of a Z system was used for 1100 swords as lay-down processing. Attachment is simply impossible. As it is, technology is needed. However, it seems whether structure is quite better than other manufacturers. Since it seems whether
The shock of a Z system was used for 1100 swords as lay-down processing.
Attachment is simply impossible.
As it is, technology is needed.
However, it seems whether structure is quite better than other manufacturers.
Since it seems whether there is also little difference of the other company and a price, we recommend you.
View detail