![icon-webike.png](https://thimg-afcc.kxcdn.com/@wth-shop/assets/desktop/img/icon-webike.png)
Reviews
![Flat Type Seat Tuck Roll](https://global.webike-cdn.net/photo/impression/3c/3c73b9414c8a92d008a9988fa964dcd4L.jpg)
Thick but excellent
The TW I bought used came with a thin Seat, probably without the original bean paste, but
My buttocks were sore after touring about 100 km.
This product looks thick but Stylish, yet has ample Cushion.
I wasn't sure about your point about water seeping in when it rains.
If I get wet when driving, I don't really care because I will either wear rain gear or get soaked.
The only point is that some people may be concerned about the gap between the forward Tank and the take-up.
View detail
![Classic Flat Seat Tuck Roll](https://global.webike-cdn.net/photo/impression/42/42905f40f496e7d815dcd9644eb9b86bL.jpg)
Looks great!!!
[How is it used?
Mounted on 250TR
Was the one you received as per Image?
It looks better than Image, and it's raised my Tension quite a bit!
Was the installation difficult?
The installation was easy, just divert the OEM Bracket.
I had to open up the Bracket to get it to align properly with the screw holes.
How was your experience with it?
I went with Option's low rebound Seat, but the Seat itself is a bit stiff.
Because the OEMSeat is quite thick, it seems to have inferior Cushioning.
However, I had some numbness in my buttocks with the OEM, but it was resolved with this Seat.
I think it's a good firmness.
[Was there anything that disappointed you?
I was disappointed that it was not waterproofed.
When Seat gets wet, your butt will be wet for about 3 days, no matter how sunny it is.
It may be Waterproof treated, but not Tuck roll, so it gets wet.
I'm not sure what to do about that one.
View detail
![Flat seat Diamond](https://img.webike-cdn.net/catalogue/images/15496/SR-BK-DIA_TS.jpg)
cool design and high quality handcraft
what a steal! a great suprise for low budger customer. it's durable and it gives rider a very good experience of riding even it's flat. View detail
![Custom Seat Cover](https://global.webike-cdn.net/photo/impression/da/daaa35800ff1b3fa69f25238201eb657L.jpg)
Seat cover installation
I thought OEM was the best choice for Seat but I was worried about the color so I chose Cover
I installed the one for Model 4 on Model 5.
It had a fold mark on it, probably because it was packaged inside out to prevent deterioration.
Heat it up with Dryer to make the mark less noticeable, and then install it.
Because the shape of the back side of the seat is different, it cannot be fixed with Magic tape, so it is fixed with Screw.
I think the ride is slightly more comfortable because of the increased Cushion.
View detail
![Pillion Seat Smooth](https://global.webike-cdn.net/photo/impression/86/869d181ba485032dd0558598008600d5L.jpg)
Pillion Seat
It was Exactly to Flat fenderSeat made by GarageT&F. View detail
![Canyon Seat Tuck Roll](https://img.webike-cdn.net/catalogue/images/15496/NewSR-BK-C_TS.jpg)
not to be taken in
Carburetor Vehicles SR, but I was unable to install Seat.
A waste of $20,000.
View detail
![Flat Seat Smooth](https://img.webike-cdn.net/catalogue/images/15496/SR-BK-S_TS.jpg)
Replace heavens flat seat
My bike is 2014 sr400. Heavens flat seat Hook position is too low.try to first time seat was touch to battery and between seat and bike frame gap too big. Rubber mount don't reach to frame So i made custom seat kit then completed install. View detail
![Flat Type Seat Diamond](https://global.webike-cdn.net/images/reviews/778/00001010778L.jpg)
Quality good, Fitment bad
Bought for my 2013 Yamaha TW200 mod. The quality of this Heaven Seat seems very good although I haven't had enough time in the saddle to commit to that yet. The fitment however is very poor. It just doesn't hug the fuel tank like the picture seems to show. There is a huge gap - so much that the fuel tank bolt is clearly visible. I'm trying to design a wedge that will fit the gap. I wish the Heaven Seat manufacturer would help. And Webike wasn't much help. They said they contacted Heaven Seats and they said that is just how the seat is designed. So, Poor design. View detail
![Canyon Sheet Vertical Roll](https://global.webike-cdn.net/photo/impression/0c/0c43d6a784a81047e4eda404701569c4L.jpg)
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
Good Seat, but processing is necessary
When installing on the Normal tank's car body Tank's Bracket and Seat's Bracket hit Seat's front Bracket..
Because there was a description that NORMAL's Damper is required, there was an explanation and it was not attached to the sample image, so I was preparing to purchase, but the front RubberDamper was attached. It is necessary only in the backward direction.
Although I had a hard time cutting the Bracket, Quantity : It is a feeling of Fit not to lose to Normal seat once set.
Because I am raised in Damper, I think Space can be done under Seat, so I think that I can not rub it with the electrical equipment when I do Ska tune.
There is no worry that rubbing can be done because Seat land does not come in contact with Tank or Frame.
View detail
![Standard Form Low Rebound Smooth Solo Seat](https://global.webike-cdn.net/photo/impression/3b/3b8b246dbf2573602418d498d253d392L.jpg)
Very good
Because it is low back pain, I also attached Spring.
Slightly unevenness does not come vibration at all !!
The installation was also easy..
Seat itself was soft and thicker than I thought.
View detail
![Flat seat Tuck Roll](https://img.webike-cdn.net/catalogue/images/15496/VAN-BK-C_TS.jpg)
Fits Well and Looks Good
The seat seems to be of good quality. It is thinner than the factory seat but seems to be just as comfortable. I am happy with this product. View detail
![Air Mesh Seat Cover For Solo Seat](https://img.webike-cdn.net/catalogue/19350/w-1665-302_TS.jpg)
It is likely to be a necessity in the summer.
Sea's steaming by all means.
There are such things if you are looking for various things.
It is comfortable. With the presence or absence of clouds.
It seems to be possible to prevent the heat of Seat when it stopped for a long time under the scorching sun. It is likely to be a necessity in the summer.
It is also good to remove easily.
As it is supposed to be exclusive to Heaven's Solo seat, if it is a solo seat of another company, it can not be installed according to the shape or there are cases where Fitting is bad.
View detail
![Classic Flat Seat Smooth](https://img.webike-cdn.net/catalogue/images/15496/FTR02-BK-S_TS.jpg)
Quite brute force
I bought for FTR 223.
Remove OEMSeat and place Seat on the back of Tank
The hook of the nail must enter unless it is done quite aggressively.
I was saying Mr. Stain..
View detail
![Canyon Seat Tuck Roll (Seamless)](https://global.webike-cdn.net/photo/impression/cc/cc986cc43cb3177e82f16ec9ff327960L.jpg)
very good
Since K & HSeat attached to second hand SR 400 was boring, exchange. While the manufacturing method is similar to K & H, the price and appearance is good so I made it Heaven's Seat. It is quite rigid when pushed by hand, but the feeling of riding is very good. One disgusting place When waiting for a signal etc. Seat's tip width is wide and my inner throat hurts.
View detail
![Standard Form Tuck Roll Solo Seat](https://img.webike-cdn.net/catalogue/19350/f-br-c_TS.jpg)
Shape satisfied. Sitting comfort is not so good
The shape and texture were not particularly satisfactory and satisfactory products, but StandardForm (Low Repulsion Type) In spite of being written, it was a thin shape with Ka Chi Chi that I could not feel any rebound at all. I do not ask for a comfortable feeling as OEM, but I wanted a soft texture as it may be thicker a little more. View detail
![Standard Form Low Rebound Vertical Roll Solo Seat](https://img.webike-cdn.net/catalogue/19350/f-be-l-te_TS.jpg)
It was a product as expected.
Seat base seemed to be a resin Material instead of a Gold genus.
It is somewhat impossible, so I'm worried whether it will crack.
Cushion is more impressive at the tip,
Sponge was thinner in the back..
Since it costs the most load, it is better to be slightly thicker.
Design was very good impression.
White at Solo seat,
It was nice to purchase because it is not quite.
View detail
![Flat Type Seat Tuck Roll](https://img.webike-cdn.net/catalogue/images/15496/TW-BR-CL_TS.jpg)
Very fast shipping, packaging is good. Product fits perfectly for Yamaha TW 200. A bit pricey though and shipping is not free. Would have been better if cheaper plus free shipping.
Very fast shipping, packaging is good. Product fits perfectly for Yamaha TW 200. A bit pricey though and shipping is not free. Would have been better if cheaper plus free shipping. View detail
![Flat seat Tuck Roll (Seamless)](https://img.webike-cdn.net/catalogue/images/15496/SR-WBK-C_TS.jpg)
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
Some installation is required for installation
In the case of SR, Seat forward is hooked to Rubber in Frame, Rear is BoltQuantity : Fixed to Frame with 2pc.
First, the shape of the part hooked to the front Rubber is not good, and the Bolt position of Rear does not match at all as it is. Of course Frame distortion etc. There are individual differences, so I do not think that it applies to all SRs, but the material of the mounting part : Repeated fine adjustment while cutting FRP Bracket more than 10 times, finally the position of Bolt of Rear came out.
Also, Bolt itself is 1Size thinner than OEM's Bolt, and the Bolt tip is not processed like a Bolt for Seat fixing of OEM, positioning is very severe, so Bolt's Material and Screw Pitch With the addition of narrow things, in the process of positioning Bolt several times, the tip of Screw got sluggish, and correction with Dice became necessary. It is not suitable for frequent desorption of Seat.
As mentioned above, since it took quite a while to install, it would be better for those who are considering purchasing in the future, supposed not to stick quickly.
The feeling of comfort itself is thin and hard compared to OEMSeat, so the vibration is transmitted quite strongly, but the part that hits the inside of the thighs of both feet is rounded, unlike the angular shape of OEM, so the feeling of Fit is Well, if accustomed it is quite comfortable.
Because the total length of Seat is considerably shorter than the OEM, the loadability of the baggage will be worse. Also, I think that I can do Tandem if I do it, but I do not think I'd dare to do it.
View detail
![Flat seat Tuck Roll](https://global.webike-cdn.net/images/reviews/318/00001002318L.jpg)
This fits my 2015 SR400 with the use of the Daytona Seat Mounting Kit 75652. I have two small complaints (I acknowledge these are advertised for the non-fi models). 1. The tabs are too long, you will need to shave them down to clear the fuel tank. 2. It i
This fits my 2015 SR400 with the use of the Daytona Seat Mounting Kit 75652. I have two small complaints (I acknowledge these are advertised for the non-fi models). 1. The tabs are too long, you will need to shave them down to clear the fuel tank. 2. It is too short, it leaves about 1" gap between the edge of the seat and the fuel tank. It lowers your seating position, which is good/bad depending on your point of view. It's not as comfortable as the stock seat, but it's not uncomfortable either. There's enough room to go two-up on this seat in a pinch. You will need to buy you own mounting screws too. View detail
![Flat seat Tuck Roll (Seamless)](https://img.webike-cdn.net/catalogue/images/15496/SR-WBK-C_TS.jpg)
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
![jp](https://thimg-afcc.kxcdn.com/@wth-shop/image/flags/jp.gif)
Processing is required
Although it is a peculiar Style, it is not possible to install it unless it scratches the back Bracket for installation and because Screw is narrow compared to Rail for installation, it can not be installed unless it spreads.
There are things that only price is cheap
View detail