Reviews
Fits: SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman
SKYWAVE (CJ42A) Drive belt
I replaced the OEM Drive belt with this one because it started to slip a little when starting at low speeds after about 30,000 km. I think it is probably more durable. I will not know until I run another 30,000km, but next time the total mileage will be over 100,000km, so I wonder if the other parts will last until then. View detail
Durable belt to replace the original
Fits: SUZUKI Street Magic 110, SUZUKI Street Magic 110, SUZUKI ADDRESS110
Kevlar Drive Belt
This is an OEM Parts replacement. Nothing in particular. View detail
Fits: SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman
Good quality
My SUZUKI SKYWAVE250 is said to be an urban leisure high-end scooter, but once it arrives in my hands, it becomes a street sports car, rough driving style, playing for three years, finally... the belt is loose, there are abnormal noises, this car is definitely not after-sales So I had to find Webike (it looks like only webike), bought a big brand, and continued to abuse it. My SUZUKI SKYWAVE250 is an urban leisure advanced scooter, but once I got to my hand, it became a street sports car, a rough driving style, played for three years, and finally... the belt is loose, there is abnormal noise, this car is definitely not sold. So, I had to find Webike (it seems to be only webike), and I bought a big brand and continued to abuse.(translated by Google Translator) View detail
I feel more secure than OEM Product
Used for SUPER DIOZX, the OEM Product should be 18 mm in width, but the items that have been sent are 17. It was 5 mm.
It will be an error in manufacturing.
Length was close to the ideal one I was looking for, so I bought it but it is a good feeling now It is because I did not have the previous OEM Product 3000 km, so I would like to have that much - - - What happens - - - ?.
View detail
Favorite made by KITACO
After purchase in second hand, I changed about 8000 kilometers so I replaced it. Clearly compared to OEM, the width is large and the OEMBelt seems to have been considerably worn out. Made by KITACO was used also for 3 YK JOG which was riding in the past, and because it is more durable than other outside company made Belt, we also made a choice this time. About the performance is installed from before "DAYTONA High Speed ??Pulley" Compatibility with OEMBelt and the width I was using until now and Lengthetc. Is slightly different, Weight Roller and Washer adjustment is necessary from now on
View detail
Fits: SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman
Kevlar belt
I'm kind of happy because I decided Kevlar to change.
However, I do not know if my running has changed.
I think that the mochi is better than the OEM.
I'm breaking in..
View detail
Fits: SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman
To OEM for Replacement
Kotch is better than orders OEM Belt, is not it.
Trust Brand KITACO soup stocks.
I changed the Weight roller this time and I hope to get back to running.
View detail
Fits: YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X
OEMSize than original OEM was originally attached
Exchange with 2015 SE44J 1YP CYGNUS XFOR JAPAN MODEL MODEL
It is an exchange for just in case it is exchanging various drive systems.
Mileage 2000 km
Although OEMBelt was not particularly dissatisfied in particular, if you exchange it, OEMBelt can keep it under Seat as it is, so you can rest assured that ... w
OEMBelt removed ProductNo
5ML-E7641-00
Length is 794 mm, width is 22 mm, usage limit 19. 8mm, and things
KitacoBelt
Length : 793. About 8 mm
width : 21. About 7 mm
At the same time I purchased Pulley, so I started running for a while with OEMBelt so that I could hit Pulley for a while and replaced Belt this time
Previously, when strengthening other companies Belt, Pulley and Belt were all changed at the same time, but there was quite a lot of traces of Slip when I tried to remove it and there was no hit at all
Although there may be compatibility, at the time of simultaneous exchanges just put in mind just after putting a hit on Pulley and putting reinforcement Belt into it
In addition, when reinforced Belt of DAYTONA company was used for LEAD 100 it took about 100 km of initial break-in
Even if I try to slowly start taking a street ride, it is nearly 100 km until I can ride normally in a state of sliding ...
Belt of KITACO company used it for several, but since I had a good sense of familiarity at the beginning this time
The price is a bit cheap, too
Since Torque was at 4th 125 cc, Throttle operation was carried out carefully, but comfortable breaking up comfortably with little slipping from the beginning
It was enough to run 20 to 30 km
Since Throttle opening degree decreases, WR changes from 9 g X 6 to 3 g only to 11 g
I use Pulley of DAYTONA company which bought at the same time
However, the shift has changed to such extent that it changes to such a degree that it clearly made 3 pieces to 11 g.
After measuring the removed OEMBelt
Length : Less than 791 mm
width : 21. About 35 mm
OEMBelt also knew that there are individual differences, but it took about 30 mm short
It is supposed to be using Belt a bit shorter than Taiwan MODEL's 5th term OEMBelt ...
Some people prepare many Belt according to running, but I was satisfied that it will change so much
As I approached FOR JAPAN MODELOEMSize this time, the speed change has changed so I think I will change WRSetting a bit again
Belt of KITACO Co. Belt quality and initial familiarity are also good and Recommendation!
View detail
I didn’t put on a belt, but the quality is excellent on the outside. I hope that Kitaco makes a quality product. The price is quite average.
I didn’t put on a belt, but the quality is excellent on the outside. I hope that Kitaco makes a quality product. The price is quite average. View detail
Fits: SUZUKI Street Magic 110, SUZUKI Street Magic 110, SUZUKI ADDRESS110
Love the scooter with this belt! Rides much easier than my other three scooters with original MITSUBOSHI belts. Softly, quickly, briskly at the start and without failures. Into the flesh to maximum speed. So I ordered another one.
Love the scooter with this belt! Rides much easier than my other three scooters with original MITSUBOSHI belts. Softly, quickly, briskly at the start and without failures. Into the flesh to maximum speed. So I ordered another one. View detail