Reviews
Fits: HONDA cross-cub 110, HONDA cross-cub 110, HONDA Super Cub 110, HONDA Super Cub 110
CenterCarrier for CROSS CUB
Various CenterCarriers for CROSS CUB are available, but I bought this one because I thought it was the most practical.
Mount bar is also available for mounting whatever you like.
Small objects such as rain jackets can be placed and secured with a small fixing net such as for MotorcycleNet.
Helmet holder can also be attached.
DAYTONA in the photo. [Helmet Holder Replacement Parts] Holder Body
Belt and other bags can also be attached.
The photo shows a magazine supplement.
View detail
![[Exclusive for Race]Under Cowl Set](https://img.webike-cdn.net/catalogue/images/88795/el64126pr1_01_TS.jpg)
ENDURANCE [Exclusive for Race]Under Cowl Set
Molding quality and texture is fairly good its to be expected from fiberglass resin made. I like the fact it comes with all the mounting hardware which makes installation easy. The blue markings i made on the product are areas i need to grind or cut off due to my exhaust set up which i am very aware of before purchasing it, i knew i would be modifying it to make it fit. Product was well packaged and protected. I would advice anyone who purchase this cowl to be aware of what type of exhaust set up you have and be prepared for minor modification but if your a Do It Yourself like myself, it shouldn't be difficult to work around modifying it. On a side note you will need to paint it with the color of your choice as well. View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB
I think it was a little small!
[How is it used?
Purchased with the expectation of wind protection for city driving and short distance touring.
Was the one you received as per Image?
It was exactly what I saw in the product listing, but I wish it were a little larger in size.
Was the installation difficult?
The installation was done by downloading the installation instructions on the Net.
But the installation itself was not like living in a house.
How was your experience with it?
As you said, the wind to the chest seems to have improved, but the wind seems to come to the upper side from the bud root
I wish it had a little more height, but I wonder if there is a special incense for front calipers... I don't know, I haven't actually put it on.
[Included Parts:were they on?
Included Parts:was attached.
However, since it was attached to the Seat, the adhesive glue stuck to the Bolt and Washer, so it took a little time to take the picture.
[Was there anything that disappointed you?
The Bolt and Washer included with the Seat are installed, so this is not RoseRose II, but the items included with the Bracket were packaged in one bag, so it is not RoseRose II.
I thought that if they could have done the same, they wouldn't have lost it.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Bracket is not that difficult to install, but the Bolt on the Headlight side must be held down when removing the Bracket and the Bracket must be attached to the Quantities.:I thought it would be better to Set
The left side of the body (brake lever side) has a meter in the hand, so there is a possibility that the washer may drop a little, so we need to be careful.
think
It is better to be careful and watch so that there is no gap when the washer is temporarily fixed in place.
View detail
![14. Grip End Cap [Grip Heater HG: Repair Parts]](https://img.webike-cdn.net/catalogue/images/30252/08T50HANE21_1_TS.jpg)
Hole concealment of fret & mdash;厶
Holes were drilled and painted Silver. View detail
Fits: HONDA CBR125R, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA APE TypeD, HONDA CBR125R, HONDA CBR150R, HONDA CBF125F
feel well
The more you grip the lever, the more it works. When the lever is suddenly and strongly applied, the front fork sinks suddenly, so I think this type is easier to control. I don't know about the durability of this type. I would prefer a more flashy color to give it a more custom look. View detail
Oil catch tank
It looks good
However, water accumulates so quickly that it is not enough.
Perhaps it is just a tube.
You have to clean it frequently.
We believe it will be effective and we will use it.
It was difficult to install the hose, but I was able to do it myself.
View detail
Very sturdy piece of front rack.
It is mounted to the front fork and thanks to that it won't move a bit. You could even grab it a move your bike holding it. I would argue you could even sit on it :))) Very happy with this product. View detail
Perfect seat for my jc92
Seat looks good. Made with quality materials. No extra parts needed. Looks like it uses an oem base, so fitment is really good. Seat is very comfortable and im 5'8" View detail
It's awesome!!!
Not only does the front-to-back position change, but the side stand is positioned a little further to the left, making the support much stronger. However, the downside is that the support is unstable with the original side stand, so you have to shorten the original side stand or install an adjustable side stand like I did. If you adjust it well, you can park stably on any road that slopes to the left or right. In fact, it would be enough to give it 5 stars, but since I am not satisfied with the combination with the original stand, I give it 4 points. -------------------------------------------------- -------- Instead of simply changing the front and rear positions, the side stand is placed a little more, and the support is very strong. However, the disadvantage is that the pure side stand is anxious. If you adjust it well, you can park it stably anywhere on the side of the road. In fact, it is enough to give five stars, but the combination with the genuine stand is not satisfactory. Powered by Google Translator View detail
Color installation is Large variety
As others have reviewed, it is difficult to install the four collars for attaching the Fender EliminatorBody to the body. I think it would be much easier to work with if the collars were at least flange-like.
The appearance is neat and satisfactory. The weight seems almost the same as OEM.
View detail
It takes hang to tighten.
With a diameter of 22mm, it was installed on the Pipe of SP Mukawa's Carrier.
I had to bite down on the Rubber to tighten it, but it was very hard and difficult.
I think the role as Helmet holder is not a problem.
View detail
It was easy!
It was super easy to install, which is good. It looks great and I'm looking forward to the future! View detail
Fits: SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI V-STROM250
Casually Guard
I didn't want to have a LargeGuard, so I purchased this product. View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB
Stable even with heavy Rear
It is difficult to remove the Bolt and Nut of the OEMSide Stand, but the Bracket itself is easy to install.
The feel after installation is good. The STAND is located at the rear, but it is not difficult to apply.
The stability of the vehicle body with the Side Stand out is unmatched by the OEM.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSS CUB50
Satisfied
I am satisfied with the solid construction. It would be better if it were a little cheaper. View detail
Oil catch tank
The installation itself is easy, but the hose is too hard and I had a hard time fitting it. I would like to believe that it is effective, but it is not. View detail
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
For Scooter, it is a necessity.
Installed on ADV160 。 For Scooter, it's a must-have!
You can take your hands off the wheel without worry when waiting at a traffic light with a gradient.
The release is also good for One-touch! Installation is also super easy.
I used half of the Point this time and am disappointed that the price is a little high.
View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB
Dedicated Bag is convenient
The bag is also Waterproof Specification and uses a watertight fastener, so you don't have to worry about sudden rain.
It is useful for holding simple tools, Touring net, and Cableetc. for recharging.
It does not lose its shape, but if you attach a bag normally, the length of the belt is quite excessive, so it may be a little troublesome for those who take or attach a bag depending on the situation.
I leave it on and I tuck the excess Belt so that it is not visible.
The installation of the Carrier itself is easy.
Since we will also use Crankcase Bolt for Engine, I would like to have at least Torque wrench.
However, the Multi Bar is difficult to see Navigation even if a Smartphone Holder is attached to it due to its position, so I could only think of attaching a Drink holderetc. etc. (I have not installed anything, though.)
Also, if you put too much stuff in the attached Bag when refueling, the open Seat will fall right out of the way.
Personally, I think it is a very good product.
View detail
Fits: HONDA CT125, HONDA SUPER CUB, HONDA CROSS CUB
Cospa best
I was looking for a bag with Carrier and found this product.
Best of all, the price is cheap.
Material difference from expensive ones
The expensive ones are made of thicker material, so they keep their shape even if the contents are empty.
This product feels slightly crushed when empty...
But it's enough, and I prefer it this way.
I bought it to hold my Gasoline Carrying Can
Holds two 1-liter items (1L and 0.75L pictured) Just fit
Size of carrying can is about φ80 (W) ×245 (H)mm
Not related to Bag, but this carrying can is Material:Once in Aluminum, once in Gold Drink holder
I've used it with it in, but the vibration made a hole at the contact point with the drink holder.
So it is safer to cover the Cover when putting it in the Bag.
In addition to the carrying can, Dustcloth and tools can also fit in the can and are very convenient
View detail
Amazing
Another great product! Extremly happy with the 1100four badges and quick international freight, I'll be buying a few more great parts in the near future, Thank you kindly :) View detail