Reviews
Eh! Is this a good price?
This is the price of a 23W with Color G18Valve
To be honest, I bought it because it felt fishy
It's just normal!
I can buy 10 or more of them in a 2-pack from another Manufacturer
If you are using Clear or Smoked lenses, you can use
I think that it will come in handy when Valve runs out of Large when you stock a certain number of
It's a Large thing, so I'll write again
Eh! Is this a good price?
View detail
Fits: KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750
The quality is not great
There may be child Wound at the time of manufacture
There are a lot of fine wounds and uneven plating Four screws on the front are also different from the product photo, and because there is no washer, you can make it by yourself Installed (Spec. change?)
It's a bit disappointing because it looks and feels like a Large thing
Well, Parenthesis is good, that's for sure
View detail
GB250
I was looking for a Grip with a classic vibe
This is an OEM Ripro for the Z400FX, but I'm not particularly particular about it, so Honda's GB Mounted on a 250
The packaging is different from KIJIMA and DAYTONA's neat Brister, and the Vinyl bag has It's worth the price just to be in it
However, the quality is proportionately good It's tightly tightened with a stiff rubber, and it's hard to get to the handlebar, which is hard to do during installation The screw-in was decided on Smooth
Thanks to this, the GripPattern has a nice edge and it bites your hand firmly I'm a person who cares about the feel of the grip, so I was very happy with this
I guess the problem is that I've never held a 400FX Grip, Ripro I don't know if it's as good as the original or not, because I don't know the original
But recently, the latest trend (?) The squishy organic Grip is a bit … for those who don't like the squishy organic Grip, it's just I can recommend it as a Universal Product
View detail
To prevent rust on Stud bolt
The 6mm Stud bolt on the Mini bike breaks easily when it gets rusty
I used it so that such a thing would not happen again
I used 4 cylinders because it's a 2 cylinder, and if you have a MONKEY or SUPER CUB, you can use QUANTITY:2pc is enough
It may not be a good idea to manage Torque, but you can use a thin layer of Grease on the Stud bolt The assembly will not produce any Bolt rust
Also, the long nut makes it easier to maintain in tight spaces
However, the outside of the Nut itself is treated with plating by Steel, so if you leave it unattended, the outside of the Nut will get rusty It is
It's cheap, so I don't blame you
View detail
It is subtly BALI
This is a great way to get a good grip on your clothes But there was one item that had a BALI in the molding process, and the BALI itself isn't severe I didn't have any trouble using it because of the, but it's not very pleasant View detail
If you're worried, though, you might want to stop
It's not an OEM product, but as long as it's built with grease on it, there's no air leaks or anything like that I've been able to use it for several years without it
This time I reeat it for another vehicle, and if you mess up when you remove the Spigot, you can repair it Scared every time because of the incompetent situation & Spigot doesn't want to repeat the removal too aggressively So, if you're unsure, it's better to go with OEM
View detail
We're doing a good job for our price
The RAMAIR Filter I was using originally became useless, so I replaced it with this one
The hole is so small that you need to widen it when you install it to cover the funnel You may need to make a small cut in the funnel
RAMAIR and Setting remained the same
The RAMAIR is more durable
The RAMAIR was useful for about 5 years, but this one fell apart after 2 years
Right now it's still Funnel
I think it's a good idea to have it as a precaution against vehicle inspection
View detail
extremely vulnerable
The whole thing is thin and weak I didn't use it much and it cracked after about a month When I repurchased the same one, I screwed the Grip in with the collar on the Handlebar Dara, I cracked up
Even though it's cheap, I can't use it if it's this weak
View detail
Cherry OEM lowdown seat, tuck and roll
Very good quality seat, the pan is a very sturdy metal of some sort. not the most comfortable seat in the world but it S tier in the style department. Takes a ride or two for the front of the seat to kinda morph with your tank. Satisfied View detail
A little more
I bought this one because it was the only one I could find for the light size and mounting width
If it is Made in Taiwan, I thought it would be Large but it is a good price
problem
I'm very scared by vibration (used with a single cylinder) → Rubber against the upper hook I put a PVC Tape on the bottom of the unit and the jumpy sound stopped I tried many things and this was the hardest to do
It has been wet in the rain for a few times because it is stored in Garage, but the plating part has rusted I recommend protecting it with Wax etc. immediately after you buy it
Compared to the NORMAL time, Cutline was severe and flare appeared on the Right After all, I am now using Small Yarn's 140? In comparison to Cutline, the spread of light is far different
It's not cheap considering the price
good point
This is the only size I could find
Cases are matte because all platings are too shiny [Color] I was able to make it look like aluminum with Clear
You just need to install it and everything will be fine
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z900, KAWASAKI Z750
If you're going to put a Ripro 4-pointer on, you should replace it
It is more Reasonable than the PMC made one, probably due to the lack of Glass Wool
The S SizeBaffle Glass Wool that comes with the MRS Ripro 4-pointer is I had to remove it, so this product is enough for me
M SizeBaffleSingle body, it looks like the hole is too large When you see it on, it seems to be just the right size
The holes in the S SizeBaffle are too small
There are many disagreements about the sound compared to the collective tube, but first of all, the M SizeBaffle I think it's worth trying without Glass Wool
View detail
Unexpected!
I'm a person who takes off and puts on and off Chamber quite a bit, so the best thing I can do is to reuse the Gasket that has been stretched out I was using KEIHIN OEM Product because hard work = anxiety, but it still stretched me It's put away Well, I can't help it, because I have to seal it by that stretch
But this product recently It fits snugly into the groove in the early stages, probably because of the excessive stretching For installation, use a small amount of liquid Gas in the groove instead of glue to the bent part of the groove
In my usage, this product matches the OEM Product!
View detail
It's just normal!
It is used to make GIXXER round
I was worried about the price, but no problem at all
However, I was worried that Rim's Plating was going to rust, so I painted it rustproof
The optical axis was fine
View detail
Fits: HONDA CB400FOUR (NC36), HONDA CB400SF, HONDA CB400SS, YAMAHA SR400, YAMAHA VMAX, YAMAHA XJR400, SUZUKI GS400, SUZUKI IMPULSE400, SUZUKI INAZUMA400, KAWASAKI 250SS MACHI S1 , KAWASAKI 350SS MACHII S2 , KAWASAKI 400SS MACHII S3 , KAWASAKI 500SS MACHIII H1 , KAWASAKI 750SS MACHIV H2 , KAWASAKI BALIUS, KAWASAKI KH250, KAWASAKI KH400, KAWASAKI KH500, KAWASAKI W400, KAWASAKI W650
Overhaul alternatives
I bought it with no expectations at all Or rather, I used it in time while I was taking the Nitron out to Overhaul I don't mind it so much when I ride around town, but it's still just Spring It was awful to compare it with the product I can buy for almost 20 pieces View detail
Cherry headlights
The goods are carefully packed, the goods look good, but not as clear as the picture. Goods shipped quickly. After installation, I found the light to be a rebel 500 model and a classic look. The lamp is quite bright and has a warm light, which is very suitable for the Vietnamese climate with a lot of rain and fog. Thank you webike for helping me have a wide selection of goods and quality as I wanted. The goods are carefully packed, the goods look quality but not as clear as the picture. Goods are shipped quickly After installation, I found the lights match the rebel 500 and classic look. The light is quite bright and warm light is very suitable for the Vietnamese climate or heavy rain and fog. Thank you webike for helping me get more choices of goods and quality as I want. translated by Google Translator View detail
Fits: HONDA CB650, HONDA CB750F, HONDA CB900, HONDA CB1100F
You can use it for now
I think it's thinner than OEM
It flips over when gasoline is attached (Rounding up.)
It's not leaking and can be used if you are careful when installing it
Could it be that you're taking into account that it's getting old and expanding?
View detail
Fits: Others , KAWASAKI ZRX400, SUZUKI GS400, Others CRSmall body, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400
The ZEPHYR750Normal cab is impossible to install, and it sucks
I found ZEPHYR750 OK as the vehicle type setting, so
I bought it, but when I tried to install it
The Out-side Filter hits the Frame, and
It could not be installed
I'd like to return it, but I've opened it all up
I'm crying myself to sleep
Normal cabs cannot be installed
The above is the worst one, because of the above
View detail
Enough for occasional use
Not suitable for frequent use
The finish is rough and even looks like it might injure you if you use it with your bare hands
However, if you are an individual Youth and cut a cheap Chain a few times a year at most, it's enough for you There is safer than flying Pin's head off with a Thunder
Cost performance is Number one
View detail
It's nice to get a discount on Spring only
This is the spring of the Rear Brake Switch
Spring has been broken or limping around without knowing it
It helps to be able to purchase only Spring
You can bend it to any length you like and use it to fit any motorcycle
View detail
Required for Old School?
I bought it to make my SR400 Classical
I don't know, I had a motorcycle shop do the installation LeftHandlebar has some air in it, and it is slightly dented to a very small degree (no hindrance to driving)
I don't know the product of the other company, but the same type of Type has been sold, but I bought it by Naming and price Decision
SR400's front brake lever can't be adjusted in stages, so I can get used to it because I have short fingers It's going to take a little bit of work to get to the end
The shape is thicker in the center and fluffy and easy to grip with Small fingers As an unexpected byproduct, the clutch can be operated more softly However, because the distance to the front brake is farther, the operation was delayed by one TEMPO13 Shall
Grip strength is good, but the winter Gloves fabric (pilling) is tattered and difficult to remove Does it mean that the grip is that strong?
View detail