Reviews
I am glad that KEIHINOEM Product is easily available by mail order.
I purchased this item using the Small Item Shipping method.
Although I haven't driven the Slow Jet enough to see the wear and tear on it, I replaced the Slow Jet I used to use since it had reached about 50,000 km.
What I received is the same as my previous NORMAL Carburetor Parts.
It was very helpful to be able to purchase them at WeBig because KEIHINOEM ones are hard to find.
View detail
Fits: Others FCR Carburetor Body Carburetor for Φ28-Φ33(Small body)
Needle
I bought the FCR Spigot this time with a Setting change because I shortened the FCR Spigot. I think I'm getting so-so Settings. I think I have to use PRO for this one. I enjoy this setting so much that I don't leave it to PRO. View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type
Washer for Pilot screw
Washer for Pilot screw, replaced a 4-strand FCR carburetor body that was leaking Gasoline from one part.
As a result, the leakage is Stop.
The O-ring that was replaced at the same time was only slightly thinner in appearance.
The washer was not distorted, so there seemed to be no need to replace it, but we replaced it just in case.
Each Piece was in a Zip lock in the condition shown in the photo.
View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type
O-ring for Pilot screw
O-ring for Pilot screw, replaced because Gasoline was seeping from one of the 4 FCR Carburetor Body.
As a result, the leakage is Stop.
The O-ring is slightly thinner in appearance.
Replaced with Washer.
Each Piece was in a Zip lock in the condition shown in the photo.
View detail
Not a push, but not bad.
This is also youthful indiscretion.
I had a longing for a Classic Race vehicle, and I put it on when I thought the shape was Parenthesis.
It is not a bad carburetor, but I was surprised at the difference in ease of handling when I installed the FCR Carburetor Body afterwards.
good point
●Fast enough to be quite fast as long as setting is available. Energetic from low speed.
The cylindrical shape looks like an old Racer and is a good parenthesis.
● Funnel, PowerfulSpec. and options.
A bad point
Carburetor setting from FCR Carburetor Body must be changed every season to run.
The price of the FCR Carburetor Body is the same as the Gold price.
This carburetor was mainstream in the past, before the FCR Carburetor Body was introduced, so performance can be expected there, but it takes a lot of time and effort.
But it's possible because I'm pursuing shape and Retro. If you want convenience and power, it's FCR Carburetor Body.
View detail
Setting
Purchased for setting of FCR Carburetor Body
It's a pain in the ass, but we have to do it, so we'll replace it.
)
View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, その他 CR-SPECIAL Carburetor, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type, Others CR-SPECIAL Carburetor, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type
In reserve.
I ordered this for a spare because it is a small part but if it gets lost or bent, it will not be able to run. View detail
Fits: Others FCR Carburetor Body Carburetor for ø35-Φ41(Large body)
Thickness is important.
I use different thicknesses in summer and winter, and I think the thickness is a very important point in determining the fee ring. I think the thickness is a very important point in deciding the fee ring. As with other packing products, it's really helpful to be able to choose from the Parts List and buy immediately. View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type
I replaced it after seeing its condition.
The Teflon coating on the surface of the carburetor body was worn off, so I had to replace it. View detail
Fits: Others FCR Carburetor Body Carburetor for Φ28-Φ33(Small body)
Needle
This time I bought it to change the Needle. If you are able to do some setting, this is a good choice, but it is not a task for amateurs. If you have an AFR meter, you can set it to some extent. View detail
Fits: Others FCR Carburetor Body Carburetor for Φ28-Φ33(Small body)
Needle
This is the second time I have purchased this Needle. I used it on my friend's motorcycle so I bought it for my own motorcycle.
There are many types, but if you decide on the right one, you can ride with one front and one rear for a year without any problems. Next year I want to have a PRO look at it and see how much difference it makes.
View detail
Fits: Others FCR Carburetor Body Carburetor for Φ28-Φ33(Small body)
Needle
This time I bought Needle to see what would happen if I made it a little thicker. The result became thick as expected, but because I do not know if I do not buy and install and run all this, I have used quite a lot of gold only with Needle, but it is good because I enjoy setting. View detail
![1. Top Gasket (Communal To Large/Small) [Repair Parts]](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0070/21648259_1_TS.jpg)
Fits: その他 CR-SPECIAL Carburetor, Others CR-SPECIAL Carburetor
When the carburetorOH.
[How is it used?
It is a simultaneous replacement with Float chamberO-ring.
How was your experience with it?
Size and quality are both fine.
It fit beautifully without any sagging.
The price of the O-ring system is a little high, but it deteriorates over time, so it is Recommendation to replace the entire system.
View detail
Fits: その他 CR-SPECIAL Carburetor, Others CR-SPECIAL Carburetor
Replaced at the time of carburetor OH
[How is it used?
Bought it when SR's CRcarburetorOH.
How was your experience with it?
Size and quality are both fine.
It fit beautifully without any sagging.
The price is a bit high, but it's a hassle to get a Trouble later on, so I think you should definitely replace it during OH.
View detail
Fits: その他 FCR carburetor for Φ35-Φ41 (large body), Others FCR Carburetor Body Carburetor for ø35-Φ41(Large body)
FCR's fuel efficiency setting is completed.
FCR's fuel efficiency setting is completed. The product that was inserted into the existing genuine product had poor fuel efficiency. I bought OCEMZ and OCEMQ and set them up, and they stand out. The fuel efficiency has improved. I'm riding it well right now! View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type
I'm repairing the calibrator.
I'm repairing the carburetor Whenever I have time, I buy one and repair it. Due to environmental issues, the carburetor bike is not coming out anymore. Before the carburetor part disappears, I need to prepare it in advance. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
Don't worry about fuel economy.
Used on KawasakiZ1.
Plus alpha did the installation and setting out.
It has been reborn as a rough Zed. However, it is not difficult to handle.
It's so easy to forget it's a Racing cab.
I just remember that it's a Racing cab with poor fuel economy.
View detail
![42/31.Float Valve COMP [Repair Parts]](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0070/21648293_1_TS.jpg)
Fits: Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type
Exchange Timing is easy to understand.
It is one of the most obvious consumable parts, so it is unlikely to make a mistake in replacement Timing.
If the Spring has lost its tension or does not come back when you press the pothole, replace it immediately.
Also, if the conical rubber part has wear with stages, replace it immediately.
It is unlikely that the O.D. will lose much weight, so if you are stuck with the above two points, replace all cylinders.
View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 CR-SPECIAL Carburetor, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type, Others CR-SPECIAL Carburetor
Occasional exchange
It is not a part that must be replaced at the time of Overhaul, but this time I replaced the Float valve because it was an individual that had gone wrong entirely. The assembly was not particularly problematic, but it is a delicate part, so be careful.
As my eyesight gets worse, I felt that the process of replacing these things becomes Large strange.
View detail
KEIHIN Main jet。
This is a small part, but I think it is a well made product. View detail