Reviews
No amateur Brake hose for homebrew
This is a fitting part for the brake system, but unlike the general banjo adapter, it is a part that is directly attached to the stainless mesh brake hose (#3).
In addition to cutting the hose, shaping the end faces, and forming the wires, it is necessary to accurately insert the internal parts called Olive to prevent the socket from falling out.
The level of work difficulty is quite high.
Failure to do so will result in the Brake slipping out and dying, so it is painful unless you understand the structure and are quite confident in your detailed work, or you have experience in making Brake hoses many times.
If the hose is assembled in a way that is easy to assemble, the effect of the hose reinforced with stainless mesh wire will be lost, and you will end up with a disappointing hose that is better than a rubber hose...but only a touch better than a rubber hose.
The angle cannot be adjusted after assembly as is the case with the Banjo adapter type, so it is necessary to consider the direction and angle from the time of assembly.
It takes a lot of hang to put it together well, and there are very few amateurs who can do it well.
Fortunately, I have experience in the past in producing 200 hose kits a day for a certain company, so I am very familiar with this fitting process and can freely assemble them in 5mm increments.
The Banjo adapter type would have eliminated such difficulties, but why bother using the troublesome Olive type?
It's a Type that I think lighter and Simpler is Cooler.
It's a world of complete self-congratulation, where the loud, anodized, lumpy, hardened Hose hates Large.
The part number indicates that it is an authorized Goodridge product.
Banjo made by Goodridge is thinner than those made by other companies, which is good for a stylish finish.
Now, this 3Way is the Parts to branch the Hose.
There are a few examples of T-shape with 3-way, but usually the Straight fittings are stuck from three sides.
That way, I don't have to worry about the twist angle of the Hose, etc., and it's easier to assemble and install.
Many products that appear to have only a Socket can freely rotate the Socket part and do not need to worry about the twist angle.
In such a situation, this Parts is Olive type, so there is no such convenience!
The twist and length of the hose that sticks in from three sides must be matched EXACTLY in order to use this difficult part.
Moreover, this is with Bracket for Mount.
Since it is assumed that this PARTS is fixed, the lack of room and deception is maximal.
But when it's finished, Parenthesis is great, isn't it?
The intent and skill of the creator of these parts are obvious to those who know what they are.
It is for Large people.
View detail
Used when changing the routing
I bought this to change my original Brake hose routing from Direct to hPattern.
The product is solid and reliable as it is a famous manufacturer.
View detail
To 3 WAY!
From WDirect to T1 Type!
I made it compatible with red color of Socket Blue.
At the same time, make holes in Cover so that Hose does not move
Fixed. But Hose from Master cylinder
It was slightly long so I interfered a bit but ordered a short Hose
I think it will be a good feeling.
Next exchange planned!
View detail
Since it was required to branch a Brake hose, it purchases. Usage only binds a Hose tight. although it will be simply bound tight if the square portion of the middle of T character is pinched with the bundle of the Hose part which faced e
Since it was required to branch a Brake hose, it purchases.
Usage only binds a Hose tight.
although it will be simply bound tight if the square portion of the middle of T character is pinched with the bundle of the Hose part which
faced each other with the
Spanner etc. -- with the bundle below T character --
-- a device is somewhat required.
Since
power cannot enter easily, it is insufficient with a bundle and cautions are required in a Fluid not leaking.
View detail
When using T character, die-length doubling has the best gauging. It is the most difficult work it bends and is attached that there is nothing. But since there was no Space attached to the Caliper side by the Double this time, there was this pr
When using T character, die-length doubling has the best gauging.
It is the most difficult work it bends and is attached that there is nothing.
But since there was no Space attached to the Caliper side by the
Double this time, there was this product and it was saved.
View detail
The left is an old Stainless mesh for ~ [ which was branched in order to use one Straight from a radial extraction mouth ] Being connected.
The left is an old Stainless mesh for ~ [ which was branched in order to use one Straight from a radial extraction mouth ]
Being connected.
View detail
[Webike Monitor] The Brake hose of CB1300 is made into a Stainless mesh, and it purchases in order to use that it is pure at the same management. It compares pure and is dramatically made by the Compact. Although authentic positi
[Webike Monitor] The Brake hose of
CB1300 is made into a Stainless mesh, and it purchases in order to use that it is pure at the same management.
It compares pure and is dramatically made by the Compact.
Although authentic positive one are however a Holder and one, since a Bracket does not have anything, either, fixation is slightly delicate here.
Since it is
, it is referred to as *-1.
View detail
It is small and easy-to-use. If it is this, isn't it conspicuous and fit anywhere? It was good to buy it.
It is small and easy-to-use.
If it is this, isn't it conspicuous and fit anywhere?
It was good to buy it.
View detail