Reviews
Fits: HONDA DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA DIO (2Cycle), HONDA DIO (2Cycle), HONDA LIVE DIO, HONDA LIVE DIO, HONDA LIVE DIO, HONDA LIVE DIOSR
Since there are parts which it is a product made from a kitaco of reliance, and also are carrying out simultaneous wearing. It will be clear that they are the last parts that would change although it is the orthodox parts into which timing in variable
Since there are parts which it is a product made from a kitaco of reliance, and also are carrying out simultaneous wearing.
It will be clear that they are the last parts that would change although it is the orthodox parts into which timing in variable speed was changed to the high rotation area to the extent that pains is still considerably taken over setting, although it is not the impression of only this clutch kit, and would lose.
View detail
It used for the adjusting lengths of the brake hose of an earls. If such seal parts are not reuse and a thing from the first is not certainly used as a new article, they will cause trouble. Especially since it is parts required as evaluation of go
It used for the adjusting lengths of the brake hose of an earls.
If such seal parts are not reuse and a thing from the first is not certainly used as a new article, they will cause trouble.
Especially since it is parts required as evaluation of goods, there is also no point of recommendation, but I think that it is good in the case of the cut of a brake hose for the direction which asked of the motorcycle store or became skillful to carry out.
Since it is maintenance in connection with a brake, it is concerned with a life.
Let's work carefully.
View detail
Fits: HONDA HORNET600, HONDA HORNET250, HONDA HORNET600 [Hornet]., HONDA HORNET250, HONDA HORNET250
Very much [ rigidity ]. Attachment is also easy. At the time of sheet opening and closing, a sheet and a carrier interfere by a slight difference and it merely becomes difficult to do opening and closing. It was slightly regrettable although i
Very much [ rigidity ].
Attachment is also easy.
At the time of sheet opening and closing, a sheet and a carrier interfere by a slight difference and it merely becomes difficult to do opening and closing.
It was slightly regrettable although it might be individual specificity.
Others are satisfactory.
View detail
It was cheap, and the design was also simple, was pleased with the price, and it purchased it. Although only the lowest thing has tried sound, since it is sound to the extent that it is seldom different from a normal muffler, I think that the worries
It was cheap, and the design was also simple, was pleased with the price, and it purchased it.
Although only the lowest thing has tried sound, since it is sound to the extent that it is seldom different from a normal muffler, I think that the worries about a nuisance to the neighbors etc. are satisfactory! Since the description is somewhat rough, or does not simply become known to the direction which carries out muffler exchange for the first time very much.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Since it has put on the parking area of an apartment, the motorcycle cover has always been hung, but it has melted very well with the heat of a muffler. Even if it sticks the sheet not melting, it will melt immediately in the contact carried out just
Since it has put on the parking area of an apartment, the motorcycle cover has always been hung, but it has melted very well with the heat of a muffler.
Even if it sticks the sheet not melting, it will melt immediately in the contact carried out just for a moment.
(The cheap cause also has a motorcycle cover) It purchased for the measure.
The kana which it is liable to youth SUKASUKA since it attached to the exhaust pipe part instead of a muffler portion, but is not so bad well as for appearance
effective for the time being -- it is .
View detail
The places of a loading hook increase in number by attaching this. Attachment only attaches this to a change of the bolt which has stopped sheathing. If even a screw hole suits, it is attached anywhere. I think that they are ideas goods which
The places of a loading hook increase in number by attaching this.
Attachment only attaches this to a change of the bolt which has stopped sheathing.
If even a screw hole suits, it is attached anywhere.
I think that they are ideas goods which are not.
View detail
The object for tandems was also managed, and, either and it purchased as an exterior purely. Although this kana ~ that makes and comes out and in which this price is high just for a moment was thought, various objects for 250TR had only this, as a res
The object for tandems was also managed, and, either and it purchased as an exterior purely.
Although this kana ~ that makes and comes out and in which this price is high just for a moment was thought, various objects for 250TR had only this, as a result of searching.
They are simple and convenient custom parts which anyone can attach easily by bolt on.
View detail
Fits: HONDA NSR50, HONDA NSR50, HONDA NSR80, HONDA NSR80, HONDA XR50 Motard, HONDA ZOOMER, HONDA ZOOMER, HONDA XR100MOTARD
Although the feeling swung seeing a surrounding person changing almost although there was no mind with which it tampers since the blinker of normal was pleasing, normal is a clear lens in the reason for calling it good ... too. It is titanium coating.
Although the feeling swung seeing a surrounding person changing almost although there was no mind with which it tampers since the blinker of normal was pleasing, normal is a clear lens in the reason for calling it good ... too.
It is titanium coating.
An image can be renewed without changing the form of a blinker, if it is this.
View detail
It purchased for the purpose of the dress-up up. Since attachment only removes one bolt which has stopped the brake lever, it is very easy. As for the attached comment, the circumference of a handle becomes a beauty!! Since it is fairly high when
It purchased for the purpose of the dress-up up.
Since attachment only removes one bolt which has stopped the brake lever, it is very easy.
As for the attached comment, the circumference of a handle becomes a beauty!! Since it is fairly high when the back falls and a master cylinder breaks, it is safe if this is attached ^^
View detail
Since it was ? time-tested product parts attached wholly, he bought it. A red wire is dressed up and is cool. Although attached and run, it is unchanging in it being pure. But I think that it is durable since the wire is a stainless.
Since it was ? time-tested product parts attached wholly, he bought it.
A red wire is dressed up and is cool.
Although attached and run, it is unchanging in it being pure.
But I think that it is durable since the wire is a stainless.
View detail
A paint application state and tone are Sakka comparatively having no luster's and deep paint application. Although I bought blue, it was blue a little darker than a picture. Although it is hard to compare, it is a color like the undiluted solution
A paint application state and tone are Sakka comparatively having no luster's and deep paint application.
Although I bought blue, it was blue a little darker than a picture.
Although it is hard to compare, it is a color like the undiluted solution of the Blue Hawaii of chipped ice.
After wearing becomes an accent of a number part moderately, and is pleasing.
However, a problem is one.
The screw thread of the bolt tightened from a flesh side was strangely tight, and it was not able to fasten a plate easily.
When fastened with all its strength, since it was anxious, what has only a pure bolt on the back side was used as it was with whether special paint application comes off.
Since it was a portion which is not visible, even if it used an authentic positive one, there was no problem, but since it was slightly dissatisfied for solid difference of a product, it is a three stars.
View detail
I think that there is no difference with the other company. Although it is with KAWASAKI:W400, any vehicle types are possible for attachment. He equipped the frame. I am glad if there is Black's band.
I think that there is no difference with the other company.
Although it is with KAWASAKI:W400, any vehicle types are possible for attachment.
He equipped the frame.
I am glad if there is Black's band.
View detail
although it is a not too bad ordinary drain washer, since it is certainly needed when changing the oil by a price being cheap, the contents of the shopping basket are likely to come out to a slight degree, and are likely to change to 10,000 yen! a flume -
although it is a not too bad ordinary drain washer, since it is certainly needed when changing the oil by a price being cheap, the contents of the shopping basket are likely to come out to a slight degree, and are likely to change to 10,000 yen! a flume -- unacquainted -- it was alike and he buys it with adjustment. View detail
It is colorful and beautiful. Since the hole of wiring is vacant from origin and can turn by hand unlike a bolt type, it is user-friendly.
It is colorful and beautiful.
Since the hole of wiring is vacant from origin and can turn by hand unlike a bolt type, it is user-friendly.
View detail
It is better for an easy part to also check a service manual, since there is also a place from which important directions, such as torque management and an assembly order foreword, are taken out in order to fix. Slack of one screw may lead to a seriou
It is better for an easy part to also check a service manual, since there is also a place from which important directions, such as torque management and an assembly order foreword, are taken out in order to fix.
Slack of one screw may lead to a serious accident.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Attachment is easy only by exchanging for the cap nut of the suspension bottom and fixing with a hezagonal wrench. I consider appearance as it is smarter not to attach. It uses, when someone must be put, since the frame has been cut in the case of
Attachment is easy only by exchanging for the cap nut of the suspension bottom and fixing with a hezagonal wrench.
I consider appearance as it is smarter not to attach.
It uses, when someone must be put, since the frame has been cut in the case of.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Although it thinks that this product may attach high evaluation in the point ! made custom easily -- The place I do not get only those who know to notice not much is a fly in the ointment. However, I am satisfied.
Although it thinks that this product may attach high evaluation in the point ! made custom easily -- The place I do not get only those who know to notice not much is a fly in the ointment.
However, I am satisfied.
View detail
Since a brake touch was not pleasing, it changed. Since the admiration which is also carrying out appearance custom comes out, exchange of a brake hose has many people who are doing very well. The important engine performance is very much good tou
Since a brake touch was not pleasing, it changed.
Since the admiration which is also carrying out appearance custom comes out, exchange of a brake hose has many people who are doing very well.
The important engine performance is very much good touch.
A brake touch is also improved and there is no complaint any longer in.
Even if master cylinders were exchanged and it changed the touch, it considered, but it is this and ended.
How about exchanging [ those who have dissatisfaction in the front brake ] once?
View detail
It is a diameter of a line to a tank and a radiator at the time of plating tank exchange of a zoomer (ruckus). If it is made Mr. SUKESUKE, it will be right or wrong.
It is a diameter of a line to a tank and a radiator at the time of plating tank exchange of a zoomer (ruckus).
If it is made Mr. SUKESUKE, it will be right or wrong.
View detail
Fits: SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI RF400, SUZUKI RF400, SUZUKI RF400, SUZUKI RF400, SUZUKI RF400, SUZUKI RF400, SUZUKI RF400, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, YAMAHA MAJESTY250(4HC), YAMAHA MAJESTY250(4HC), YAMAHA TZR250, YAMAHA TZM50, HONDA CB400FOUR (water-cooled)
It was used for NSR50. In my case, although it was trouble-free entirely, in other homepages, it sees well. Although it seems that the sensor of the water thermometer broke in the noise when the plug of an EGV system was used, since I was twisting
It was used for NSR50.
In my case, although it was trouble-free entirely, in other homepages, it sees well.
Although it seems that the sensor of the water thermometer broke in the noise when the plug of an EGV system was used, since I was twisting and preventing the metaled tape in the sensor, possibly I did not break.
Since the rest is a little with error, let's put a sensor into the once boiling pan and measure the temperature of a molten bath.
Since it is as with error as the temperature currently displayed if it does not become 100 邃?having boiled, a more exact temperature can be grasped if it knows.
in saying, I come out not too bad and am ***.
View detail