Reviews
It was used for the front fork of GN125H. Since it was a very soft raw material, it left the pure dust seal as it was, and as it covered an it top, it equipped with it. Since it is comparatively thin softly, it is good, and on a seal, elongation m
It was used for the front fork of GN125H.
Since it was a very soft raw material, it left the pure dust seal as it was, and as it covered an it top, it equipped with it.
Since it is comparatively thin softly, it is good, and on a seal, elongation may carry out -ed and fits.
As it was, since Faulk of GN was 32 mm, since he was GABAGABA, he pasted up the rubber sheet made into the belt inside the top chord of dust boots, and united with Faulk's thickness.
More, a feeling of a classic peculiar to GN is emphasized, and has become as an aim.
I think that it is thinly [ as fork boots ] pliant, and easy to unite with any motorcycles.
View detail
Since it was stopped by the policeman when this was not attached, it purchased with the fender less kit.
Since it was stopped by the policeman when this was not attached, it purchased with the fender less kit. View detail
An authentic positive one oxidized with the copper washer, thought that the surroundings were also made to corrode, and bought it simultaneously with mesh hose purchase. There is only aluminum and a die is made immediately softly. Well, since it w
An authentic positive one oxidized with the copper washer, thought that the surroundings were also made to corrode, and bought it simultaneously with mesh hose purchase.
There is only aluminum and a die is made immediately softly.
Well, since it was disposable components like the drain washer, it purchased once more than necessary quantity.
View detail
Since custom-made has ordered, it is single article purchase. There are goods of side 30degree by other manufacturers. Although he thought that he would carry out re-alumite treatment of it, since it did not understand how the pitch of thread woul
Since custom-made has ordered, it is single article purchase.
There are goods of side 30degree by other manufacturers.
Although he thought that he would carry out re-alumite treatment of it, since it did not understand how the pitch of thread would be different by the manufacturer, it became an order by the manufacturer.
I think that there should just be side 60degree, 90 degrees, etc. of goods.
View detail
Fits: YAMAHA FZ-8 FAZER, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-8
08 FZ1-N (domestic specification) was equipped. Attachment working hours are about 1 hour and a half. The description had a little unclear unkind admiration as me. A fender less style completely changes an image with normal too. Especially
08 FZ1-N (domestic specification) was equipped.
Attachment working hours are about 1 hour and a half.
The description had a little unclear unkind admiration as me.
A fender less style completely changes an image with normal too.
Especially the rear style from slant serves as a compact and racy image, and is very pleasing.
I think that it became smarter when it was a design which a number plate and a blinker fixing position go up on 1 more cm.
View detail
a [buying motive] -- in order to exchange a front brake hose for a pure thing by -KLX250 (07) -- this product good ridge: -- a GOODRIDGE stainless adapter -- Product number : The B593-03CBK, wide use, and angle:20-degree color:Black raw material:stain
a [buying motive] -- in order to exchange a front brake hose for a pure thing by -KLX250 (07) -- this product good ridge: -- a GOODRIDGE stainless adapter --
Product number : The B593-03CBK, wide use, and angle:20-degree color:Black raw material:stainless and a good ridge:GOODRIDGE washer (product made from an active),
product number: -- 20998004, wide use, and size:1 mm thickness / inside diameter:10mm raw material: -- number [ of entering copper ]: -- 4 was purchased.
[Attachment of goods] The pure banjo of -KLX250 (~07) is the special thing of turning the bottom of a caliper with a metal tube from the fork guard lower part, and bringing to a banjo bolt.
- When using a common banjo, even if 20 degrees is any, since the junction of a banjo adapters and a hose will come out outside from a caliper if the sag direction is brought to the before [ vehicles ] side, 45 degrees of hose or banjo adapterses will be immediately damaged at the time of a fall to an off run.
- Therefore, it sees from before and 45 degrees can connect with a hose inside a caliper, if 20 degrees of the sag direction is brought to the vehicles rear side by which banjo adapters.
However, at 45 degrees, management of a hose becomes quite forcing and die length is also needed.
- By a straight banjo adapters, since a terminal area with a hose hits with a caliper, a connection section will come out to the outside of a caliper after all again.
- The only pattern is a pattern which brings the sag direction for a 20-degree banjo adapters to the vehicles rear.
(Refer to photograph) - even if it falls in off now, a connection section is protected by the caliper and breakage can be prevented.
[Grading of goods] Although many things were tried as a mount to -KLX as above-mentioned, it is a 20-degree banjo adapters ordinary as goods.
- By an off vehicle, I think that the stainless banjo adapters which is not aluminum too like this product, and a bolt are indispensable since there is a risk of a fall on a path through a wood etc.
Since it is ordinarily good as goods, it is considered as a three stars.
View detail
a [buying motive] -- in order to exchange a front brake hose for a pure thing by -KLX250 (07) -- this product good ridge: -- a GOODRIDGE stainless adapter -- product number: -- B594-03CBK, wide use, and angle:45 degree color:Black raw material: -- the
a [buying motive] -- in order to exchange a front brake hose for a pure thing by -KLX250 (07) -- this product good ridge: -- a GOODRIDGE stainless adapter --
product number: -- B594-03CBK, wide use, and angle:45 degree color:Black raw material: -- the stainless and good ridge: -- a GOODRIDGE washer (product made from an active) --
Product number: 20998004, wide use, size:1 mm thickness / inside diameter:10mm raw material:copper The number of entering: 4 was purchased.
[Attachment of goods] The - authentic positive front reservoir side banjo adapters has brought sag to the tail side at 20 degrees.
- Although fitting of the hose was carried out this time, in order that a hose might wear to instruments, such as a meter, a little, in the pure banjo angle and the sag direction, the sag was brought to the front side by a 45-degree banjo adapters.
- A hose does not wear to instruments now.
[grading of goods] - it is ordinarily good.
Considering a fall risk, by an off vehicle, a stainless with reinforcement is good.
It is considered as a three stars.
View detail
A reflector may be special if a fender less is used. Be sure to attach! It may be before stopped by the police. Since this was cheap also in price, it was purchased. However, if the number plate is attached to this while using it for a one cyl
A reflector may be special if a fender less is used.
Be sure to attach! It may be before stopped by the police.
Since this was cheap also in price, it was purchased.
However, if the number plate is attached to this while using it for a one cylinder motorcycle before, the number will have broken probably because of vibration.
Therefore, I consider the cover of a number plate as it is better to attach together.
View detail
It is attachment at XANTHUS. Exclusive elegance was regarded as wiring processing of a general-purpose article being managed since it is high, and purchased. Although it becomes empty since it says or there is no object for xan, as for the goods h
It is attachment at XANTHUS.
Exclusive elegance was regarded as wiring processing of a general-purpose article being managed since it is high, and purchased.
Although it becomes empty since it says or there is no object for xan, as for the goods here, the coupler of connection (smile) is a scalpel type.
Since an authentic positive one having been a male and a connector omission substitute were not completed, wiring was cut and they connected.
It also considered returning pure once and made connection the plug.
Moreover, since XANTHUS was always lighting, the kiln of the relay is carried out and it was made ON-OFF [ + wiring by the side of LO beam ].
As goods, it is what may be conjointly made dramatically into the refreshing also with the high throttle.
Wiring processing requires a wiring diagram etc.
Since I thought it serious to do individually very much, it was referred to as *3.
View detail
Fits: HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
Since it was the cheapest out of the fender less existing [ various ], this was used. Since the raw material is metal, there is sense of security. However, some processing is required, if you would like to tamper with an angle since an angle canno
Since it was the cheapest out of the fender less existing [ various ], this was used.
Since the raw material is metal, there is sense of security.
However, some processing is required, if you would like to tamper with an angle since an angle cannot be adjusted.
Since it and a number LGT use an authentic positive one, those who are examining the polished of LED do a recommend with LED.
Although it attaches with it and is with a description, how to remove a pure fender is not explained.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB750
Although the result had heard that it was not good, the result thinks that it was good rather than considering.
Although the result had heard that it was not good, the result thinks that it was good rather than considering. View detail
Fits: SUZUKI GSX1100S
It attached to GSX1100S KATANA. It becomes possible to attach 4 pot caliper of a brembo to a pure disk rotor. There was also little error and the problem did not occur when attaching. Moreover, it is shaving, thing finishing is very beautiful,
It attached to GSX1100S KATANA.
It becomes possible to attach 4 pot caliper of a brembo to a pure disk rotor.
There was also little error and the problem did not occur when attaching.
Moreover, it is shaving, thing finishing is very beautiful, and surface texture is very good.
it is based on contact of a caliper and a rotor -- it pulls and Sim and a spacer are also attached for correction of a shearing error.
The explanation about handling of Sim was deficient in the sad thing, and when it attached and attached where, it was in the state which is not understood what location moves.
It moved, when the caliper had approached the right to the rotor, the caliper had approached the left to the rotor in the front fork side and the bolt by the side of a caliper was made to bite.
Change of a brake hose is also needed by attaching support and a new caliper.
It is dramatically light.
It is the same as Faulk's color, and is not too showy.
It was a product with appearance and compact and very sufficient user-friendliness.
View detail
Fits: SUZUKI GSX250S, SUZUKI BANDIT250, SUZUKI BANDIT250
an aluminum material beginning to delete and coming out -- texture -- a murmur. An attached bolt is SHOBOI. I want you to use at least torque at least.
an aluminum material beginning to delete and coming out -- texture -- a murmur.
An attached bolt is SHOBOI.
I want you to use at least torque at least.
View detail