Reviews
C17Z9990010ZZ
I'm used to using the emergency light in the car (blinking all the turns) to attract attention, to say "thank you" and so on. I miss this feature on my Honda Little Cub. I purchased this button to eliminate this "injustice". I haven't installed the button yet, but everything is fine in terms of material and workmanship!!! View detail
Convenient to install Disc Lock on the vehicle without burden to the body.
I would like to carry a Disc Lock with Alarm to protect against theft while on the road, but I don't want to carry it in my backpack or HolsterBack because the Disc Lock is so heavy.
Also, since I ride a naked motorcycle and did not want to use a Seat bag or Tank Bag just for this purpose, I chose this Holder which allows me to secure the Disc Lock to the vehicle body.
This Holder is designed to be attached to the Handlebar, but I didn't want to make too much noise by attaching this and that around the Handlebar, so I attached it to the Tandem FootpegBracket.
I am satisfied with the ease of use.
View detail
Inexpensive but effective parts
The fastening Bolt of BMWOEMBrake Caliper was rusting, so I replaced it with Titaniumium Bolt from Rise Corporation during Overhaul.
A certain Oak Auction has a Bolt made of SUS304 Stainless Steel for Caliper fastening, but considering the fracture strength of the material, I think it is very dangerous and has a high possibility of breakage.
This Titaniumium bolt should have no problem in terms of strength, and the screw threads are beautifully machined.
View detail
Fits: YAMAHA TZR250, YAMAHA XJR400, YAMAHA TDM900, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA MT-01, YAMAHA FZR600, YAMAHA FZR600, YAMAHA YZF600 THUNDER CAT [Thundercat]., YAMAHA YZF-R6, YAMAHA FZS1000 FAZER [Feather]., YAMAHA YZF-R1, YAMAHA FJR1300, YAMAHA ROADSTAR1600 [Roadster]., YAMAHA ROADSTAR1700 [Roadster]., YAMAHA TZr125 R (4DL) for Front, YAMAHA TZr250 R (3XV) for Front, YAMAHA TZr250 RS (3XV) for Front, YAMAHA FZr400 RR (3TJ) for Front, YAMAHA FZr600 SFAZER 98 for Front
Brake Pads
This is the first time I have purchased and used this Manufacturer's Brake Pads.
I've only replaced them with less than 200km of driving, but the effect is a little softer than my previous Brake Pads.
I think it's like
I am hoping that after a few more runs, it will adjust and become the ideal effect for me.
View detail
For retrofitting electrical systems
I purchased the Racer to make it a public road Spec.
Quantity of electrical components:I could have bought it as a Set, but I bought this one because I can reconfigure it in various ways.
It was a little bit difficult to wire the unit because it was installed from scratch in a vehicle with no safety components. 6V MONKEY/GORILLA Main Harness is connected to the main harness, which switches the supply from the power source on and off.
View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
CB250R installed.
I installed it on my CB250R. Affordable and easy to see.
It's just right because it doesn't stick in the Motorcycle seat.
View detail
Very Nice!
Awesome exhaust great prices and super fast shipping. The workmanship is incredible can't wait to install it on my Honda reflex scooter it is still winter where I live but I will install it asap! Thank you so much! Gerry View detail
Ideal for washing a wide range of cars!
I bought this Large sponge type product because my car is a Full Cowl and I need to polish a large area! Bubbling." Water absorbency." The concave center section makes it easy to grip!" It is impeccable! I have used it over 30 times to wash my car and it has never lost its shape! It can be used hard! View detail
Fits: Others
You can get the feeling of doing it even with such small parts.
Pad pin of bremboOEM is a little Large strange to remove! View detail
Requires some ingenuity in installation
Quantity:Pair (for Left and Right) The end cap of the grip can be removed by pushing it out from the inside (not by screwing it on), but it is difficult to remove if it is stuck in the grip rubber well.
As others have mentioned, the wire winding diameter of the Throttle cone is about 2mm smaller than OEM, so that part needs to be modified.
I had originally cut and modified PVC Pipe to make it larger in diameter, so I did the same with this one.
The diameter of the part where the Grip Rubber is attached is the same as that of a normal Throttle cone, so it can be used without modification if there is no problem with the Throttle cone being low-slung.
The Left Side Grip was also press-fitted with a Throttle cone, so I was worried about installation, but this one had rubber on the inside of the cone, so it fit the outside diameter of the Millibar as it was, so after peeling off the original Grip Rubber, I lightly tapped it in and it went in. After peeling off the original Grip Rubber, I lightly tapped it in and it went in.
For the power supply, there was an Emon power supply extraction fuse of the same size as the Headlight fuse, so the Cable end of this fuse and the Wiring end on the Heater side were each modified and attached to the Bullet Terminal.
There was no place to install the minus ground, but a regulated rectifier was installed in the front cover, and its mounting bracket was a bare gold plate, so I loosened the bolt there and connected the wiring between the plate and the plate. The bracket was a bare Gold plate, so I loosened the Bolt there and connected the Wiring between the plates.
When the power is supplied properly, the Button glows Red→Green→Blue, so it was also convenient for installation to check whether ACC is energized or not.
The color of the Switch's Lamp is probably set to Red (strong), Green (medium), and Blue (weak) like many other things, but when I ran a test run, I felt that Blue was warmer than Green.
I am satisfied with the Switch as it is easy to operate and has a good texture.
Other reviews said the color of the Switch was Orange, but the one we received was Black.
I honestly did not expect it to be this good from the Body price, so I was disappointed in a good way.
I wish I had purchased it earlier.
View detail
Fits: KAWASAKI Z400, KAWASAKI Z400, KAWASAKI Z400, KAWASAKI W650 EJ650A, KAWASAKI KZ400, KAWASAKI EX500S, KAWASAKI ESTRELLA [ESTRELLA] RS Custom BJ250A, KAWASAKI ESTRELLA Custom BJ250A, KAWASAKI ESTRELLA [Estrella] BJ250A, KAWASAKI ELIMINATOR250 [ELIMINATOR]SE EL250A, KAWASAKI ELIMINATOR250 [ELIMINATOR] V VN250A, KAWASAKI 250TR BJ250F, KAWASAKI 250TR BJ250F, KAWASAKI Z400LTD Belt Drive KZ400H 83, KAWASAKI Z250LTD Belt Drive KZ250R 83-87, KAWASAKI W650 EJ650A 05-08, KAWASAKI KZ440Sport Belt 82, KAWASAKI KZ440LTD Series 83, KAWASAKI KZ440LTD Series 80-82, KAWASAKI KZ440LTD Belt 83
The best!
It is perfect. I contacted Webig first and received an immediate response. It is not easy for me to ask myself, "Will this product be compatible? I am very relieved because I asked Webig about it before purchasing. The product is as good as OEM. I am not sure about the durability of the product yet, but the low price and quick shipping was a big help. I will continue to use your company for many years to come. View detail
Fits: SUZUKI DESPELADO, SUZUKI BOULEVARD, SUZUKI MARAUDER, SUZUKI VANVAN, SUZUKI TEMPTER, SUZUKI INTRUDER, YAMAHA Ensiter 125, SUZUKI SAVAGE, YAMAHA FZX750, YAMAHA XV950, YAMAHA R100 ROADSTER, YAMAHA VIRAGO, YAMAHA XV1900, YAMAHA DRUG STAR, YAMAHA Bolt, YAMAHA SR400, YAMAHA SR500, HONDA CTX700N, HONDA CB650, HONDA DREAM
Good cost performance for the production
I think the quality is high for the low price.
The body is a rather heavy gold, and the lens cut is a bit stylish.
I think that the cosmetics of inexpensiveness in relation to price is the strongest.
View detail
Fits: KAWASAKI NINJA2 Helmet50RR, HONDA CB223S, HONDA CB400SF, HONDA GB250 CLUBMAN, KAWASAKI KSR-1, KAWASAKI KSR-2, KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZX-9R, KAWASAKI ZZR1100/ZX-11, KAWASAKI NINJA400R (-2013), SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX750 KATANA, SUZUKI GSX-R1000, SUZUKI GSX-R400, SUZUKI GSX-R600, SUZUKI GSX-R750, YAMAHA R1-Z
Cospar good
First of all, the cosmetics are good. I have no problem with it. I thought it was a very kind construction with markings to guide the positioning when installing it, but I do not recommend it to those who are concerned about markings. View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
quite good shape
Mirror was rusted out and replaced with a more recent form.
The navigation is easy to see and the design of the Mirror makes the vehicle feel like it has been exposed.
There is no runout when driving.
View detail
Fits: HONDA BENLY50, HONDA DIO110, HONDA LEAD125, HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X
The atmosphere has changed completely and it has become Sporty!
It is perfect for YAMAHAGRAND MAJESTY, easy to install, no problems, wider field of view, increased safety, and most importantly, Parenthesis is great! View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
grown-up (man)
Replaced OEM for better rear visibility. View detail
Cute rounded Tail lamp.
[How is it used?
I had made my own Fender Eliminator and used a DRC Tail lamp to refreshen the Rear area of my KSR-II, but I felt that it did not fit the round Image KSR and was looking for an alternative product. I was looking for an alternative when I found this product on Webike.
Was the one you received as per Image?
I think SPTakegawa had a product of the same design when LEDTail lamps started to appear in the world....
I remember that the LED bulbs were expensive and they were prone to break easily, so I had to replace them because they looked shabby and the glowing parts were gradually diminishing.
I remembered this after purchasing the product, but I installed it with a positive attitude, thinking that the reliability must have improved over the months that had passed since then.
The product is more than Image.
Was the installation difficult?
In my case, I made my own Material:Since the work was to install the Fender Eliminator on an aluminum Fender Eliminator bracket, drilling and wiring were performed on the Fender Eliminator side of the self-made Fender Eliminator (only the Tail lamp was used, not the Plate attached on the back side). (Only the Tail lamp was used and the Plate attached to the back side was not used).
This product is Universal Product. So I think Large, Small, or this kind of processing will be necessary.
After installing it on the Fender Eliminator, all you have to do is connect the wiring of this product to the wiring for the tail lamp on the body of the vehicle, but this product does not have the wiring that is often found in this type of product. "Bullet Type Terminal Spec
Modern motorcycles have connector terminals, so it is easy to find a connector that fits the harness side of the vehicle at KITACOConveniencePartsetc. and modify it to make a simple connection.
Fortunately or unfortunately, most of the terminals that connect to each light in KSR-II are Bullet Type Terminals, so it was possible to connect them with a small modification.
How was your experience with it?
The LED bulbs have not broken out like previous similar products mentioned above, so the functional part of the product has not been a problem so far (observation required).
My personal impression is that the rounded design of KSR and the slightly old-fashioned design of this product match each other and seem to fit together strangely.
[Included Parts:were they on?
It was a Simple Package with only a Tail lampBody, UniversalPlate, and a simple Instruction Manual.
[Was there anything that disappointed you?
Not at all.
I hope it is durable.
Other items that would be helpful
Point and hang of installation
This product is Tail lamp and UniversalPlate is Quantity:The play is a set product, but it should be considered only as a bonus, and you need to image how it can be installed in a good (or safe) manner in the vehicle you want to install it in before you start the processing. I'm thinking, "Huh? Maybe I should have mounted it a little higher (or lower)?" You may end up redoing the work because you are not convinced like I was (I'm not half disappointed...).
[Availability and clarity of the Instruction Manual
A simplified but illustrated Instruction Manual is included.
[Notes]
Nothing in particular, just be careful not to misplace Wiring.
[ITEMS TO BUY TOGETHER
As I mentioned above, it is sold by KITACO and others. OEM Type Connection Terminals by Manufacturer will allow one-touch connection to Harness on the car body side.
Since the method of fixing to the car body varies depending on the car model, it is better to try a temporary assembly before full-scale installation.
First, check the fixation method by placing it on the vehicle in which you want to install it.
[Opinions and requests to Manufacturer
Please keep up the good work in maintaining prices as much as possible and keep selling for a long time to come.
View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
Mirror
The Mirror is very easy to read and the large size is very comfortable and satisfying. Thank you very much. View detail
Fits: SUZUKI ADDRESS V125 [ADDRESS] G CF4EA, SUZUKI ADDRESS V125 [ADDRESS] G CF46A, SUZUKI ADDRESS V125 [ADDRESS] CF4EA, SUZUKI ADDRESS V125 [ADDRESS] CF46A, SUZUKI ADDRESS V125 [ADDRESS] G CF4EA, SUZUKI ADDRESS V125 [ADDRESS] G CF46A, SUZUKI ADDRESS V125 [ADDRESS] CF4EA, SUZUKI ADDRESS V125 [ADDRESS] CF46A
It's getting brighter
The OEM had deteriorated and we replaced it with this less expensive one.
It reflects the light of the Valve well, so it is very easy to see and I am satisfied.
However, I changed to LED bulbs at the same time, and the light seemed to be slightly scattered, so I gave it 4 stars for visibility.
I don't think Halogen or OEM Valve would mind.
View detail
Helmet with Inner Visor can also fit.
The quality is above the price. (There is a BALI...)
Installation was smooth.
When installing on the base, the Red Lock button is a little hard to engage, but after several times of mounting and dismounting, it became less of a concern, perhaps due to familiarity with it.
It can be installed without modification like the others in the Review.
Helmet with Inner Visor (Camry II Size L) just fits in.
View detail