Reviews
Great quality!
I didn't expect to receive this Quality product for $2,000
Some modification is required, but it can be made to fit your motorcycle as you adjust it
Comfort equipment tends to basically make you look bad, but this product will increase your comfort and look good It's a wonderful thing that makes it better
I can't believe this is $2,000 Very good purchase
Thank you very much
View detail
It is cheap and good
I used it as a blowby hose
The Hose was soft and easy to handle
I bought it for the price as it is not a prominent place, but it was sufficient for my needs
However, it's industrial-mechanical design makes it unsuitable for a prominent location
View detail
But for those who only think about Cut
Seal chain to non-seal (Clip equation) The purchase is only to change the
This Cutter can cut the Chain once, discard the original Chain, and
This is an item for those people
It's cheaper and better if you just want to cut it, but if you want to use it repeatedly
Buy another luxury item
The quality of the Chain Pin extruding rod is poor and the shaft is straight in a blur
Can't press Pin
Probably the bar is only at the lowest level of strength, and if the pin is hard, it will break easily
So, shave the head of the Pin until it is flat before using it
When you say it's worth the price, you can say it's a product that requires a lot of dedication and determination
By the way, the handle is just stuck on the standard screw, so it's not as long as the appropriate length
If you stick a bolt in it and use it as a handle, you can hang a lot of power on it
Most of all, though, Cutter's Stick can't stand up to its power
View detail
Cost performance is perfect
Purchased for rounding
with Bulb, but Color:Yellow and not so bright
Well, you're buying a Headlight, so it doesn't have to be with Bulb
It is light and the texture of Plating is passable
Considering the Gold amount, there is nothing to say
View detail
Functionality good, Cost good
As described in the product description, it has a textured finish, probably due to bad casting sand
But it works fine
The ease of use is the same as other high end manufacturers, etc
Then cheap is a good thing! 。
View detail
Cospar good
It is installed in CHALY that has been converted to 12V. blinker is not LED but 10WFilament front and rear The blinking interval is stable because there are only 3 poles, and the switch is ON! There is no problem at all in function
There is no HangerRubber, so depending on the car model, you may need to work on fixing it to the car body
View detail
Fits: KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, Others
It leaked at 50%
There are four Float valves in it, but two of them leaked
I bought it because We-Big carries it and the price was low, but the OEM is still the best! Yes
View detail
Fits: HONDA CBR600F, HONDA VFR400R, HONDA VFR750F, HONDA VFR800, KAWASAKI KDX125/SR, SUZUKI RGV250 (Gamma), HONDA CBR600F, HONDA CBR600F, HONDA VFR400R, HONDA VFR750F, HONDA VFR800
There is no difference between the OEM Product and Large
The first time I tried to use the outside Oil Seal, but the shape and Material are Large It doesn't seem to make a difference
I installed it in KDX125, but it seems that the thickness is a little thicker than the OEM Product and it is firm I had to type it in to get the Snap ring to fit
Dust Seal was not used because the shape of the Dust Seal is different from the OEM Product I don't think it would be a problem if it was an Inverted Front Fork on the road
As for the feel, unfortunately it's snowed in and we'll have to wait and see next spring
View detail
Vietnam Biker
I bought these with some expectations after seeing those that my friend bought before me. The product I received has a good feeling of quality finish overall. The design was also nice, especially considering the price. What I found especially dissatisfied was the small spot of rust found in the surface. This occurs on 2/4 items.From experience, I can see that the longevity of these items will shorten because 01 small rust spot will cause large rust spot in short time. View detail
Recommendation
All three motorcycles I've ridden on are BarrelGrips
This product also feels great in the hand
Cost performance was satisfactory
View detail
Huh ha Gap is there ... really it is star Zero
Used for SA16J JOG.
Result ... Can not use. It was nearly an Objection place. If you buy this, Emon's 4-pole Relay is sure. After all, I repaired using EmonRelay.
View detail
Fits: HONDA CB400SF, KAWASAKI ESTRELLA, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, HONDA SHADOW, SUZUKI SKYWAVE, SUZUKI Impulse, SUZUKI BANDIT, YAMAHA YZF-R1, YAMAHA XJR1300, YAMAHA TDM900, SUZUKI GSX-R750, KAWASAKI BALIUS, KAWASAKI ZRX400, KAWASAKI ZRX1200, KAWASAKI D Tracker, HONDA FORZA, HONDA HORNET
I am satisfied.
Before I realized that BrakeRAN of commuting for FORZA was not pointing.
I ordered it as usual so I ordered this.
Although it felt somewhat less comfortable compared with OEM, it was installed.
It works without problems.
View detail
Fits: KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, Others
Only Float valve and Float packing are used, but enough
GPX 250 R overflowed, so considering it as including spare parts, it was judged as unqualified and purchased.
It is slightly cheesy than the OEM Product, but it is a place that I can not see and I think that I got the spare parts if I thought that I got a complete set of OEM Product, so I am satisfied.
View detail
Fits: KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI XANTHUS, KAWASAKI ZXR250R, KAWASAKI ZXR400R, KAWASAKI ZXR250, KAWASAKI ZXR400, KAWASAKI ZXR750, KAWASAKI ZZR400
Cheap things are dangerous
I bought it because it was cheap and I thought that I could fail. Other people said that if you stretch Rubber other people said you did not grow well but it ended in the end of the phrase and it failed as a result.
Just because it is cheap to purchase is dangerous. It is said that this is a waste of Gold.
View detail
It may be a shame feeling
I installed it in CR Carburetor, but when opening Axel to accelerate
It is likely to be stalled and it is difficult to run
Sponge's eyes are too fine to become resistance
View detail
It is enough to consider frequency of use.
Removed from the Gold mold of the casting and processed as it is.
However, Chain's Piece packing etc etc. How many times a year do you recommend? This item is recommended for those who can use it by all means.
It is better to buy the famous Manufacturer's Cutter.
Bush-born casting → BALI taking surface by yourself Buffing → Self-made finish
It is particularly recommended for people who can enjoy saying like this.
View detail
Spec. Ambiguous & Coil Consumption current excess Large
I tried to use it for Yamaha 3KJ JOG, but the 7 A Fuse just after Battery flew.
Spec. Because it is not explicitly stated, I do not know whether it is a broken item or not.
It became a loss of money purchase.
View detail
Fits: YAMAHA XJ400, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJ550, YAMAHA XJ400, YAMAHA XJR400
Cospa best
It's cheap.
It is price less than one-third of OEM.
And yet it's functioning properly.
I attached it to YD 125.
View detail
Fits: YAMAHA XJ400, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJ550, YAMAHA XJ400, YAMAHA XJR400
Good
I attached it to YAMAHA YD 125
Gasoline It was good, as leaks are gone
Cost performance is nice
View detail
Cherry grip
It's a handlebar grip that puts on the handlebar Dax. Convertible to use for Honda Chaly, basic pattern, normal, can fit But when I touch, I feel that the texture is quite hard, not soft. A hand strap that removes the dax hand. I used to put honda chaly. Basic pattern can be fit. I feel that the meat is quite soft, not soft hands.(translated by Google Translator) View detail