Reviews
Product Concept is good....
I bought it because I couldn't find any other similar products and it looked convenient.
When I received the product and opened the box, the Hose was bent over as shown in the picture.
It seems to be because it is packed too small for the body.
When I requested a defective replacement, the Manufacturer's response was It's safe to use. And
I didn't give up and sent out the Objection again and they responded that they had checked their inventory and all of them were in the same condition and wanted to handle it by returning it.
The product itself seems to be easy to use and is very disappointing as there is nothing else in a similar price range to change.
It may be difficult to deal with, as it appears to be an imported product.
I think it's a waste of time when you can prevent it by just making the packaging one more sizeable.
Right now, all of the inventory in the DAYTONA warehouse is no good.
Unless you're a person who doesn't mind as long as it's cheap and you can put air in it anyway, it's probably best not to do so.
I can tolerate a bent-over habit, but a broken Hose is just not very useful.
I had it Cancellation processed because it was impossible for it to be new and broken before that.
View detail
It was a difficult product.
On SC59-CBR1000RR, HURRICANE Clamp Bar was tightened with Mirror's Bolt inside the Screen, and MiKnowla's Smartphone Holder and Xperia XZ2 Premium were installed there.
However, because the power supply of the smartphone is SIDEButton, the screen sometimes disappears by vibration during Navigation, and I thought that it would go well if I replaced it with this product and bought it.
About this product
It was good point
The interference of the power supply Button etc. is avoided by making the slide part of this product Left Side.
enumeration
Bad point
I think that Spring is used for the Slide part of this product, but it is abnormally too strong and it is possible to use it with one hand.
When you try to install it, you can't get the Slide part so far that you think it will break your phone.
I have to push it and I am very unhappy
The slide part is strong to make the smart phone Quantity:The Clamp is subjected to an unreasonable force when it is set.
Since it is added, Damage is likely to appear in other Clamp Bar parts.
General review
If you attach it directly to the Bar handle, it may not be a problem even if force is applied to the Slide part. However, I think that it is necessary to pay attention to the pressure of the smart phone. The screen crack might happen?
I can't help it, I bought it, but if I could return it, I would feel like doing so.
In the end, if I want to use it, I think I have to use it by pulling Slide with my other hand while supporting this Smartphone Holder and my phone to lock and unlock it.
View detail
It's not Waterproof!
"I ride my Motorcycle to work, so I can't not ride it even when it's raining.
However, the Gloves stick to your hands in wet weather and are cold and very uncomfortable in the winter.
So I bought the water resistant Gloves, but unfortunately, it was a disappointment.
While it will repel water for the first few minutes, it will start to penetrate and become heavy on the cheats after about 10 minutes.
It doesn't dry very quickly either.
I've come to the conclusion that this would be better to spray the Water Resistant Spray on the Leather Gloves, or stop using it.
I'm curious to know how water resistant the other products are. "
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1400 (ZX-14)
No change at all.
The OEMParts and Size are the same and I don't feel the Manufacturer nominal 25mm Lowdown at all. I am not sure if it is lowdown at all. View detail
Fits: YAMAHA JOG/C, YAMAHA BJ, YAMAHA Remote controller jog, YAMAHA JOG Zr, YAMAHA JOG/C
fact
does not work on ymaha bj 50cc, maybe marriage, I wrote a honest comment so think you need it or not in the pictures they paint that everything works everything is fine in fact it does not work on ymaha bj 50cc, maybe marriage, I wrote a honest comment so think you need it or not in the pictures they draw that everything works everything fits in fact it is not that translated by Google Translator View detail
Not at all.
This is no good, I wanted to use the thin ones from the Pin Cutter and bought them, but they break easily. Even when I held the hole position firmly in place, it didn't work. In fact, I borrowed a friend's and tried to cut the Chain and it bent. I bought it as a substitute, but it was also bent. It's no good...it's very rare that it's no good for a DAYTONA. View detail
Fits: BMW R850RT, BMW R850R, BMW R850R, BMW R1200ST, BMW R1200S, BMW R1150RS, BMW R1150RT, BMW R1150R, BMW R1150GS, BMW R1150GS, BMW R1100S, BMW R1100RS, BMW HP2 SPORT, BMW R1200RT, BMW R1200RS, BMW R1200R, BMW R1200GS, BMW R1200GS Adventure, BMW R900 RT 03-13, BMW HP 04-08
The build is fine.
I bought it because it's a pain in the ass to get the in-vehicle tools out.
It didn't work on the R1100RS.
It's a shame that the R1100RS was included in the fitment.
View detail
worst case scenario
I bought it before and got Recall and bought it again.
It interferes with the air cleaner and cannot be installed.
In addition, the nail of Case was broken when I tried to put it on a little too hard.
View detail
Fits: YAMAHA BirdCity, YAMAHA MAJESTYS, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA MT03, YAMAHA Tricity155
Is it defective?
When I opened the package and checked the contents, the Silicon band attached to the Mobile Holder was on the verge of being cut off.
It's a cheap product, so I guess I'll just have to give it up as a matter of course.
It was very disappointing.
I'm not happy.
I guess it's all cheap and bad.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA XR100MOTARD, HONDA APE 50, HONDA APE 100, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD, HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA APE 50, HONDA APE 50
Defective item
I don't really need it, but I bought it with Clutch lever and wire because it was Stress to get Blinker out.
When I tried to put it on, it was Switch bad and wouldn't hold when I got the RightBlinker out.
It takes about a week to receive a notice to send it back because it's defective, and I'm still waiting for a response from DAYTONA even though I've received an email twice since then.
I don't know what's going to happen after 2 months, so I'm going to repurchase it at We-Big, which is disgusting, but I have a point to make.
Next time I hear from you, I'll leave it alone for about two months.
View detail
Returned by Manufacturer due to defective dimensions.
I have returned it, but I can't confirm the return gold.
I don't think it's We-Big's fault since it's a Manufacturer dimensional defect, but I'm not sure about the post processing.
What's going on?
View detail
Fits: SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI Glass Tracker Big Boy, SUZUKI Glass Tracker Big Boy, SUZUKI Glass Tracker Big Boy, SUZUKI Glass Tracker Big Boy, SUZUKI Glass Tracker Big Boy, SUZUKI Glass Tracker Big Boy
non-compliance warning
I searched for a product by vehicle model and got a hit, but it ended up not being compatible. And I have to pay for the return shipping. This was the worst shopping experience I've ever had. Please be careful. View detail
Fits: KAWASAKI W400, HONDA CB1100, HONDA CB1100 typeI, HONDA CB1100 II, HONDA CB1100 EX, HONDA CB1100 BLACK STYLE, HONDA X11, HONDA X11, HONDA CB1000SF, HONDA CB1000SF-T2, HONDA CBR1000RR, HONDA CBX1000, HONDA CBX1000, HONDA GL1000, HONDA CBR929RR, HONDA VFR800, HONDA VFR, HONDA CB750FA, HONDA CB750FZ, HONDA CB750FB
What's up with DAYTONA?
I bought it because I liked the previous product (which comes with a storage bag on the rear). is Pe LePera, a crusty, lousy product. Is it DELUXE that's the same etc. as the last one? It's the same quality as Donki's 2000 yen. View detail
Many non-compliant cars, be careful about purchasing
ManufacturerHP
The CB1300SF negative pressure valve is higher than the OEM, so it cannot be used
but no other conformity information is available
As you can see in the image, it doesn't turn out to be in the same position as the OEM
I ended up buying the OEM again
Review
Car models that may be available
VTR1000F
AF58
HondaCR125R
Kawasaki ELIMINATOR 250V
HORNET 250
KLX250SR
The available Reviews above include
It's possible that you don't realize that you can't get around to the OEM position
Car models that are considered unavailable
VFR800F
GSX-R1000 k5 k6
SEA BASSGLADIUS650400
MUZSCORPION
ZX-9R
DT230 LANZA (DT230)
NS-1
View detail
Fits: SUZUKI GSX-R1000R, SUZUKI GSX-R1000R
It's the worst
It's been a few days since I bought it, but because of the direct sunlight, the Cover was heated and stuck to the Tank and the paint went wrong You got it? It won't come off. It's hard to scrub
It really sucks, please do something about it
View detail
I'm not happy about it
I don't appreciate its function as Income because it is a basic solo, but Switch, Lever The response is too bad
When the power is turned on and off, the volume control is operated by lever and AButton I can't do it because of the poor response You can use your phone's Body instead of Income to manipulate the playback controls on your phone You have to do it
You can connect to two phones at the same time, but the other person's voice sounds like it's playing Eco on both phones when you call I can't hear you
I bought it at Webig and immediately contacted them to return it within 3 days of purchase, but they were not responsive and still sending me instructions to send it back There is also no state of affairs
Although We-Big is not responsible for the product defect, I have nothing but disbelief in the way they handled it after the application Please take action as soon as possible
View detail
Daytona Hot Grip with built in 4Sn
These grips are not up to the expected Japanese electronics quality. The built in switch did not work on mine and since I did not report this until past 30 days, I only have a very expensive pair of regular grips. View detail
Daytona Heated Grips with built in 4 Position Switch
I would caution anyone considering these grips. These are not up to the usually expected Japanese build quality. I purchased this set during the winter months in the Northeast USA and did not connect them to a battery to test them during the 30 day return period. When I did test them, I found that the switch that was built into the left grip was not working. I contacted Webike and was told that they could do nothing about it. I inquired to see if I could purchase a replacement left grip and was told that there was nothing that they could do. So now I have a set of regular grips that cost me $107.00 USD. View detail
Fits: Others CR-mini Carburetor, Others PECarburetor, Others PWK Carburetor
not compatible with diozxOEM carburetor
Live DIOZX OEM Carburetor didn't fit in
It's the same shape, but a little thicker
I should have done a little more research and bought it
View detail
It's broken
As I've read in other people's posts
The Right Side Throttle sleeve side is hard
I managed to shave off the Throttle sleeve
It went in, but it seemed to take too much force to get it in
It stopped turning on
The Left Side is now firmly attached to the Left Side in Bond
I had no choice but to buy another one
When you install it, scrape off the sleeve until it is loose
It looks like Bond's power will have to be used to hold it in place
View detail