Reviews
Experience the effect
It's very easy to install, but it works great.
The unstable handling that has always frustrated me.
Totally resolved!
The wide range of color variations will satisfy many people's tastes and preferences.
View detail
Rigidity is up!
The Front perimeter will look Snap.
The fluffiness was significantly reduced and operation felt easier.
View detail
No wonder there are so many high ratings.
The sense of instability when the vehicle is tipped over on the Corner has been greatly improved.
Also, the front brake seemed to work better.
I'm satisfied
View detail
Solid around Front.
No more wobbling when stopping or Start at low speeds. View detail
![[Repair Parts]DURACON(R) Slider for Vibration Absorption Lever Guard](https://img.webike-cdn.net/catalogue/images/56303/pom2_1_TS.jpg)
Fits: Others
I bought this as a supplement.
I bought it the summer before last and have had quite a few falls.
Finally, the original round shape was gone, and I decided to buy it again in a Potato-like shape.
As far as I can remember, I fell 7 times on Right and 9 times on Left with SlipDown system, but the Screw hole did not collapse and the vehicle body slid and missed Damage.
I think Slider does a good job including Material.
View detail
Hand guard is not so cool.
I was looking for a different hand guard for my 701SUPERMOTO hand guard because it was too large and not cool enough, and I found this product.
Handlebar inner diameter is 14mm.
All you have to do is remove and replace it, so the process is quick and easy.
I think the Handlebar vibration is suppressed because the Lever Guard tip is shaking when Idling, maybe.
I have no idea how much change there is from the original, since the purpose is to change from the OEM hand guard and not to reduce the vibration of the handlebar.
Refreshing the handlebar area is the most pleasant change.
It is quite solid and seems to protect the handlebar area even if it falls over in the Circuit, although I don't want to experience the effect.
View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
I can now drive like I've drawn a clean line both Curve and straight ahead.
While curving Curve, it often went in a direction I didn't expect.
Curve on a rough road surface is a real thrill.
After the installation, this was no longer the case, and the car was able to turn in the desired direction as if a clean line had been drawn.
Straight line driving has also improved.
It also reduces Handlebar being taken out on rough roads.
Installation is a snap if you have the right tools.
It's pricey but well worth it and I'm happy with the Large change.
I am rather upset with Honda for not designing with this rigidity from the beginning.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB
Excellent effect!!!!!!!
The vibration at stoplights and vibration after 50km/h have all been eliminated. I asked a motorcycle shop to install it because it seemed difficult to disassemble and reassemble the throttle part. So it is not cheap for the product + labor, but I think it is worth it. View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
Rigidity Up can be felt.
The change in stiffness is immediately apparent when driving with it installed.
The change is more easily seen when you go to a rough area such as a forest road.
Black was out of stock, so Clear was painted with Urethane.
The price is high, but the quality is high and good.
View detail
After all, Universal
The welding of the outer Flange section was messy,
ManufacturerThey were outside the published dimensions and did not fit delicately.
I was able to shave it down somewhat File and put it in.
The sound seems to have quieted down some … though,
It is best not to expect a muffling effect.
Improvement of the smell of the exhaust Gas is clearly effective, though,
It is no match for the OEMExhaust System catalyst.
It still smells even at RPMs that should have reached the reaction temperature.
We recommend that you purchase the product assuming a reduction of about half.
View detail
100 stars for super fast delivery
I put it down with the intention of waiting for 3 months, but it came to me like a gift. Thank you so much. The product has a great finish and is very light. I will use it well.
Installation will be done slowly. I'll install it and post a picture.
Thank you again for the fast delivery. -------------------------------------------------- -------- I put it down with the heart of waiting for three months, but I came to me like a gift. Thank you so much and thank you. The product is also great and very light. I will install it slowly. I'll put it on it and upload a picture. Thank you again for fast delivery. Powered by Google Translator
View detail
Tubeless design for increased peace of mind
I asked the Shop to do the processing work, but now that I have made it Tubeless, I can go on long trips without worry. View detail
![Clear Tubeless Kit 3-Piece Set [Repair/Optional Parts].](https://img.webike-cdn.net/catalogue/images/75414/image006_TS.jpg)
RepairKit with air leak prevention fluid.
I need this for Air Leak Repair for Repair because the Tubeless process of FRWheel is very Large and strange when I work on it by myself. If possible, I would like you to add air leak Repair fluid as well. The extra Tape was useful for preventing scratches on Frames, Guards, etc. View detail
Fits: その他
Currently being used for Lever Guard of another company.
The bar end fixation attached to another company's Universal Lever Guard was too loose, so we diverted this product to fit the handlebar inner diameter.
I appreciated the fact that the Bar End I.D. had an Exactly component.
View detail
Fits: HONDA glom, HONDA MONKEY125
Single cylinder as comfortable as possible.
It was installed to improve the vibration of a single cylinder Handlebar as much as possible.
Since I have a Bar end mirror, I didn't think Weight would be attached, so I decided to use this Parts.
It is co-tightened with DAYTONA's Hi-Sider & Adapter and is Large sturdy.
View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
Handling、tightly
The factory manager of HondaDREAM recommended me to wear it.
Compared to the NORMAL, which was a bit more nimble, the handling was definitely tighter.
Installation was very easy, the parts look beautiful, and the cost performance is excellent considering the price and effectiveness of the product!
View detail
OUTEXStem Stabilizer
I chose the Stem StabilizerRed because my MONKEY is also red and I matched it with it. View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
Increases the rigidity of the Front.
I saw a review that said it would increase the rigidity of the Front and installed it,
After installation, you will notice the effect as soon as you turn on Corner.
The fluffy, thin front end of the CUB with little ground contact is reduced to a large size.
That said, I don't think there are any negatives that would make it difficult to ride.
If you are only using it for a short ride or city driving, it may not be necessary,
I can recommend it to those who enjoy Touring including Winding with CUB.
Installation is easy with the Large variant, but tightening Torque management is essential.
The price is expensive, but the color variations are abundant in Large,
You can also have fun choosing your favorite color for dress-up purposes.
View detail
SMCR
To be honest, it may be effective, but I did not feel it as much as I would have liked.
When attached to the current SMCR, it slightly hits the Blinker.
In my case, I put a Washer over the bottom of the Meter installation.
View detail
Good!
I think this is great.
Goi goi goi because FCB400T doesn't sag at Jump and high speed.
I can see how it works better than WP's Triple clamp.
View detail