Reviews
If you want to put Cargo on Tandem seat, it is essential!
It is attached using the Bolt on the License Plate. It is Firmly more than you think, so much so that it would be sufficient if the weight is not heavy enough to tow the vehicle. (I'm not sure what the actual load capacity is, though.)
I always have a buckle belt attached to my side bag, but I can also hang a Cargo Net Hook on it, which is very useful. This is a great price! Quantity per car:1 Set, required.
View detail
Durable! It won't come off even if you pull it hard when you hang it up!
I bought this to hang my gear when touring camping… This is really sturdy! The plastic ones from other companies lack durability and break easily, but this one is really strong! I've used it many times with a full load and pulled it hard when hanging it up.
No problems at all! It's Plating, it's textured, and it's a real Recommendation!!!!
View detail
I use it to add Hook to License Plate.
I use this product to add a Hook to my License Plate. 6Millimeter screws make it easy to install on most Motorcycle License Plates. View detail
Products with a little Habit
Used as Loading Hook for Every Van.
The Hook section is reluctant to move when tightened, so it does not move unnecessarily when not in use.
If there is an existing screw hole, there is no problem, but if you have to drill a hole to install it, it is not a problem.
It seems that there is a problem with the strength of the base material, so it is better to reinforce it with a plate, etc.
View detail
Sturdy, retractable Hook
Items that can be installed in place of the License Plate Fixing Screw to add a hook for hanging cargo.
The Body is a little bit Large size, but if the Ring is stored, I don't think it will be bothered so much.
It is made of strong Gold genus and seems to be quite durable.
It's a small thing, but the Ring part for the Hook is stored
The good thing is that it is fixed to the surface and does not make any noise or hit.
If the fixed nut is tightened tightly, it becomes very hard to pull out the Ring. If you tighten it loosely, you have to worry about the Hook falling off.
Spring washer is included to prevent loosening, but I bought M6Stainless Nut at Homsen and fixed Double nut. Conveniently, there is a lot of room in the screw length.
Especially on motorcycles with few loading hooks, the Large is effective in stabilizing the load.
View detail
It's a big help when you need it.
The MT-09 doesn't have a Hook so I installed this product along with the Plate hook.
When you're on the road and have more luggage, the more Hooks you have, the better.
A little cheaper would be nice
View detail
The effect is very large though it is a small part.
I bought a new Motorcycle, so I bought it quickly.
I have PlateHolder and Antennas base of Amateur radio as well as License Plate, but I could install them without any problem because they have separate long screws.
If you don't hook the hook of the Net or Tension cord here, your luggage will be gapped in front of you, so this is a custom parts that I need.
It is very useful not only for camping touring, but also for commuting bag and small shopping.
View detail
Increased loading capacity
Do you have trouble with the hook when loading?
I was having trouble hooking up Touring net and other Hooks due to my Ninja 1000 being Fenderless.
I think it is standard to put it on the Number place (front), but by putting it on the back, you can put Hook on it discreetly.
I chose Black, so it's even less noticeable.
View detail
For cars with less Loading Hook.
If you have the bolt holes, you can add a Loading Hook. It's a pity that it doesn't look like a pad, because it's very functional. View detail
Loadability is definitely improved
This is an in-play for the CBR400RR/NC29
Replica of this era compared to the current SUPER SPORTS750 is Seat Cowl also has Volume, and the storage space and loadability are still better, and the NC29 In a fairly substantial category of loading hooks and retractable Tandem Footpegs, etc There is However, in my personal Motorcycle as a touring companion, Loading The more Hooks, the better, because it can be adapted flexibly I used this Cargo hook for the License Plate location
It can also be used to hold a large seat bag, and the total number of seats with the seat bag on it is 5000 i drove for about 2.5 miles, but there seems to be no damage It should be frequently tightened and checked before and after rest and touring I think that it is a possible part in Large though there is not the falling out at present because it is loose Falling off is the responsibility of the owner Bank the car until it's lightly rubbed (because of the large sinkage of the car body with full load) I've never LARGE the corners), but they do their job of holding it in place
Basically, I'm happy with it It's not very noticeable and it's very convenient for everyday net loading and seat bag fixing Some people seem to be using it in different ways, so I think it's very good for those purposes
View detail
good
I buy this product the second times. Since I think this is good. The first one is black color. so i but sliver color to see match my bike or not. It is good to hang my bag. View detail
Good
I buy this product the thirdtimes. Since I think this is good and so I introduce to my friend. It is good to hang the bag that put in back of the motobike. View detail
I was able to add a hook that was not easily noticeable
I bought License PlateHook because I wanted a hook that did not get in the CRF 250 L.
I also considered Plate hook and Hook bar, but I decided that this one seemed easier to use. The actual thing is a cast and seems to have no problem in strength, but it seems a bit heavy.
Before installation, I was going to attach it to the surface of the License Plate as recommended by Manufacturer, but I knew there was a method to attach to the back of the Plate at Imp, I thought that it looks and is convenient "support" I made it..
Mounting Bolt was not an accessory, but used the Original NumberMounting Bolt of the original.
I tried Carrying cord as a trial, but I am satisfied that it seems not to be defective in terms of strength and location.
As everyone says, if you tighten Bolt tighten the hook will not move so let's keep it quite tight. It is safe to apply screw fastener if possible.
View detail
The installation at License Plate was not the best
Although it is SS, I'd like to use Touring net place so I need HookAnchor. In order to make it look as large as possible, I purchased it considering the installation of the Bolt section of License Plate.
Just when it actually matched, since Hook slightly hidden the Sticker because the car inspection sticker was delicately stuck to the center, RearSeat's Reverse side (Bolt which the image OEM Fender had kept) I decided to install it.
It is not a problem if you use Hook at a fixed angle, but if you tighten the mounting Bolt, the hook will not move so I think that it will be a negative in Case you want to fold or move Hook.
View detail
I think that it is the best for setting up the License Plate, and.
Although it is SS, I'd like to use Touring net place so I need HookAnchor. In order to install as much as possible on the Large thing, I thought about the Bolt section of License Plate and bought it.
Just when it actually touched, the vehicle inspection ship Sticker was delicately affixed to the center and Hook suffered and hid a little, so RearSeat's Reverse side (Bolt which OEM Fender had been holding) I decided to install it.
Although it is not a problem in this case, I think that Case that you want to fold or move Hook will become a negative.
View detail
I have good points and bad points
A good thing is that you were able to add Hook casually
Shaped to the edge of Number.
The bad point is that Hook's movement is tough
As a response, without completely tightening 80% lock.
Will it work if you get familiar?
View detail
Used for NS50F and TOWN MATE
NS50F has poor loading capacity, Loading Hook comes with 4 places, but the position is bad.
That used to replace this with License Plate Bolt.
When tightening, the movement of the Loop part becomes hard, but if it moves so much, it is troublesome
I think that this degree is the best.
When I switched to TOWN MATE after I removed Carrier, there was no Loading Hook
I replaced it soon as I had a hard time. There is a difference between Large and I do not exist.
Especially this is not a good product, but like TOWN MATE at the end of NumberRear
It is quite conspicuous when attached to a certain BUSINESS car. Personally I did not mind,
I think that it is worrisome for those who are concerned, I think whether it is better to see the real thing once before purchase.
View detail
Purchased for KLX 250
I installed it in KLX 250.
Rear Carrier There are also various things around,
I bought it as if there were plenty of places to hang.
Instead of License Plate Bolt.
Is Bolt closed? Spec. I do not know whether,
The Hook part is a little hardened.
View detail
It is convenient to have
I purchased this product because there is no new DAYTONA 675RLoading Hook.
I installed it in the License Plate, but when I firmly tighten it, the part of the hook will not move.
View detail
I installed it for a ship of Ron Two.
I installed it in GLADIUS 650400.
Gura, Belt for trade from Quatity under Seat : Pair (for Left and Right) Although it is out, there is no place to hang behind.
I thought of various things, I calmed down with this product.
I made the color Black and thought that it was not so conspicuous, but it is quite conspicuous ^ ^
View detail