Reviews
Touch may be too soft.
Inconvenient because the 10R OEMBrake cannot be removed without removing the Wheel.
Mounted on the underside with Bracket to improve serviceability.
The pad spring is very hard and the pad pin is press-fit, so we replaced it with an external pad spring and pin.
If you are a do-it-yourself maintenance person and use the new Crab, the above should be changed.
Even if you purchase the above, I think the price is low for an Aluminum Piston with high corrosion resistance and a pad.
The 30mm→34mmPiston changes the Ratio and the Pedal is very squishy.
10ROEMMASTER is 14Φ and there is nothing I can do about it because there is no MASTER that is any more LARGER, it should have been a 32mmPiston.
View detail
The glossiness is different from Fitting.
The company's Black fitting has a glossy texture, but this one is matte.
I would like to see it unified with Matte.
I tightened it with 20N, but it is stainless steel, so it is firm and secure.
View detail
To the Accent around the Rear tire
This is the accent as seen from the rear view. View detail
Fits: SUZUKI GSX-R1100, SUZUKI GSX-R750, HONDA CB1000 SF, HONDA CB400SF, HONDA X4, HONDA CBR1100XX SUPERBLACKBIRD [Super Blackbird]., HONDA CBR900RR FIRE BLADE [Fireblade]., YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJR400, YAMAHA FJ1200, YAMAHA FJ1100, YAMAHA XS1100, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX250, SUZUKI GS1000, SUZUKI GS750, SUZUKI GSX1100, SUZUKI GSX750
Just cover it!
Funnel is bad for the engine and does not pass vehicle inspections. The RAMAIRSystem is a simple system that can be installed on the engine, and it is easier to remove than the Power Filter, so if you want to change to a funnel, you can easily remove it. View detail
Fits: HONDA XL250S L250S, HONDA NY50 All models, HONDA CROSSCUB110 JA10, HONDA All models of GIORNO CREA AF54, HONDA SUPER CUB 110 JA10, HONDA SUPER CUB 110 PRO JA10, HONDA SUPER CUB series Engine cars (50-100cc), HONDA SUPER CUB series Engine car FI, HONDA Spacy50 All models, HONDA DREAM50 AC15, HONDA Spacy80 All models, HONDA VARIE All models, HONDA MONKEY series Engine cars (50-100cc), HONDA MONKEY series Engine car FI
Very common EXGaskett
CROSSCUB110 (JA45) Used to replace the Exhaust System of
I think Gasket is the same for all Manufacturers.
No exhaust leak etc.
It was cheaper than OEM Parts.
View detail
Too bad about the color of Nut.
Purchased because the diameter of the Nipple no longer fit in the MASTER replacement.
Same shape as 10ROEM but OEM is 8mm diameter with domestic Spec. and this is 7mm diameter with RCS Nipple.
I thought they were the same except for the diameter, but the fixed nut on the lid is silver while the OEM's is black.
It's a fewmm of Nut, but it's a shame that it looks like it's floating when I wanted to create a unified look with Black.
I tried to replace it, but it is fitted like a ring of wisdom and cannot be removed.
View detail
a little expensive
10mm on brembo OEMHose, works well.
I like the fact that there are many Size options.
It is more expensive, but Individual Youth offers Quantity:2pc. Set is enough, so Quantity is wasted.:Better than paying high Gold amount for 1 Set of 10pcs.etc.
However, I think there are cases of multiple Wiring, so 4 to Quantity:Variation of 1 Set of 6pcs. is also desired.
View detail
Satisfied
The Jet needle shape was different from the OEM one, but it worked normally. View detail
![Camouflage Pattern Bike Cover [LL]](https://img.webike-cdn.net/catalogue/images/102051/IMO9230-04_TS.jpg)
Fits: YAMAHA tricker, YAMAHA YZF-R15, YAMAHA YZF-R125, YAMAHA YBR250, YAMAHA TZR250R, YAMAHA SRX250, YAMAHA RZ250R, SUZUKI Bandid 400, SUZUKI Bandid 250, SUZUKI glass tracker, SUZUKI wolf, SUZUKI ST250E, SUZUKI RGV25O Gamma, SUZUKI GSX250S Katana, KTM 390 Duke., KTM 200 dukes, KTM 125 dukes, KAWASAKI Zephyr 400, KAWASAKI Australia, New Zealand and the United States, KAWASAKI ZZR250
It was a little small.
[How is it used?
I purchased this product because the Cover I was using had deteriorated and torn.
It is used in a covered parking lot for dust protection and anti-theft purposes.
Was the one you received as per Image?
Yes
I think it is solid for the low price.
Was the installation difficult?
It is difficult to discern the front and back.
How was your experience with it?
I looked at the size chart and purchased the size listed for my car model, but it was a little small.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I thought it would be nice to have a Mark or Line that could be used as a landmark so that it would be easier to see the front and back.
View detail
To commemorate a reservation to purchase a vehicle
I have reserved a 2024 CB650RECLutch.
Since I have some time left before the delivery of the car, I would like to prepare a few Option Parts that I can install by myself.
Back at home, I hurriedly went to webike to register My Motorcycle and search for Parts.
As a start, I found and purchased the OEMTank Pad.
OEMPartsSale was being held and I was able to purchase it at a lower price than the Dealer.
The product was in stock and arrived about 2 days after ordering.
The actual product proved to be a solid product, just like OEMParts.
The CB's Logo is also reliable.
However, I think that a slightly larger size would be more effective in preventing tank wounds.
View detail
First Inner Gloves
[How is it used?
I bought it to see if it would help with the summer heat.
Was the one you received as per Image?
I'm new to Inner Gloves, so I'm not sure if this is what I'm looking for.
How was your experience with it?
When I tried it on, it felt chilly and cold.
I would be happy if it stays cold all the time, even when used in earnest.
[Included Parts:were they on?
There is none
[Was there anything that disappointed you?
Not sure yet.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
As Inner Gloves for sweaty hands
The texture is very smooth and silky, and it is easy to use without any stress when attaching or detaching.
I thought the size might be too small, but I like it because it is highly elastic and has a Cinderella Fit.
I was concerned about the use of the product.
The Magic tape is attached to the Male side of the tape, so when you peel it off, it may get stuck. This is a common situation, so even if you are careful, there will be a point where the tape will stick if you are not careful.
View detail
(Commuting) BattleMirror
I was concerned about the width of OEMMirror and purchased it. It is not only wide, but also tall, and is built as expected.
Compared to other products, the design is more OEM-like, so I think the balance with the overall body is good.
By the way, this is the second time I bought this because the one I bought before broke.
View detail
Pilot Jet
I don't know, I haven't completed setting yet.
The response was fast and helpful.
View detail
Fits: SUZUKI GSR400, SUZUKI GSR600, SUZUKI GSR750
The texture is very good.
As expected from Made in Japan, the texture and finish are very beautiful.
Easy to operate as both lever and position can be changed.
View detail
Useful for Wiring protection and concealment
Useful for concealing and summarizing Wiring
Bend it about 45 degrees toward the uncracked side to open it up and put it in.
It is recommended to install it near moving parts or near the heat source.
This time, I protected the Cable on the front of Camera in DriveRecorder!
View detail
![Temp meter stay "Marumie-kun" YOSHIMURA PRO-GRESS [Progress] Multi-temp meter support](https://img.webike-cdn.net/catalogue/images/126077/bg-tms-y02bk_01_TS.jpg)
Fits: Others
easy to read
Can be installed in the middle of the Handlebar Clamp
It was easy to install
Easy to check voltage, oil temperature, clock, and
I think it's a good product
View detail
Useful for Wiring protection and concealment
For fine lines, φ3mm is sufficient
Only one Plus wire (ACC power etc.) so it is ideal for protection!
View detail
Fitting quality
We have now installed all the cooling fins from the first to the third level. The installation is very good, and the fitting to the SR is so well made that we thought it was OEM. I bought it this year to prevent heat leakage in summer, but in the past, oil temperature has risen up to 100℃ during summer touring. I am reporting the effect on the cooling fins with high expectations. We also considered using an oil cooler, but considering the concern about over-cooling during the winter, we decided to go with the cooling fin system. I would like to continue to enjoy my motorcycle life in the future. View detail
OilRoute partially changed Custom
We have installed Cam Screw together with Camshaft ChainBypassKit at the same time, and by changing a part of OilRoute, we have been able to increase Torque at low to mid speed range as well as improve Throttle I feel that the throttle response has improved as well as the Torque up at low to mid speeds. The hose length can be adjusted to your preference, I used it as it is and added a Colgate Tube to the hose for protection. It is fun to customize the Ideas to your own taste, isn't it? View detail