Reviews
Small size is the reason for rust resistanceMaterial:Stainless Steel Screw!
[How is it used?
Replaced the brake hose guide with an external aluminum guide.:Replaced with Stainless Steel.
Was the one you received as per Image?
It is as accurate and clean as the Image.
Was the installation difficult?
Easy installation by simply replacing it.
How was your experience with it?
It can be used without worrying about Rust.
[Included Parts:were they on?
Screw only, nothing else is included.
[Was there anything that disappointed you?
Not particularly
▼Quantity since wdisc.:Pair (for Left and Right) Four bottles are required in the following table.
View detail
Bolt replacement in prominent areas allows you to use it without worrying about Rust!
[How is it used?
I purchased this to replace the Fender mounted Bolt on the Front fork.
Was the one you received as per Image?
It was shiny and high quality, just like the Image.
Was the installation difficult?
It can be easily installed by simply replacing the Bolt with a NORMAL Bolt.
How was your experience with it?
It can be used without worrying about Rust.
It is also shiny, though not as shiny as Plating, and good for the price.
[Included Parts:were they on?
No other than Bolt.
[Was there anything that disappointed you?
Not particularly
We do not recommend this because we are afraid of gnawing on the area where the heat is applied.
I appreciate the wide variety of lineups, such as ▼length and large size.
View detail
More Classical
I replaced it with a new one that I thought would fit SR400.
It is secured with a single Plus screw, but it is aligned with the outside of the OEM's two Screw holes.
View detail
Stable abalone
The way it glows is very Beauty.
Compared to OEMs, this should definitely be changed.
They just put it on. (Lol)
I would love to have a choice, but currently only in Lens colors.
View detail
Used as Bracket for Switch on Grip heater
The Bracket that was originally attached was too long and was bent at the Prank, breaking it off at the base.
This time, I don't think it will be tampered with because the base LARGE size and height of the base are just right and not uncomfortable.
View detail
Rigidity is solid.
Quick release braceShaft Type2 requires Quick Release Brace Clamp (sold separately).
You can also choose from a variety of color variations, so you can change the color of the Clamp and Shaft.
It is different from paint-like gloss.
Mounting is Clamp's ScrewQuantity:Fixed with 2pc
View detail
Match the color of the car body.
Deep orange was selected to match the body color Orange.
PackageThe color before opening the package looks somewhat Orange or Red under the light.
Easy installation on vehicle body with only M6 cap bolt
Under sunlight, the Orange color was consistent with the color of the car body.
No BALI, etc. and quality seems good.
View detail
Fits: HONDA FORZA, SUZUKI GSX1400, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSR750, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA NM-4, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR650F, HONDA CBR1000RR, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA HORNET900
Too big?
Too much presence in the smallest groms.
But when it runs, the Handlebar Chatter is gone.
I feel more secure while driving.
View detail
inconspicuous (Compliment.)
The quality is high!
I chose Black to give a sense of unity, but with this size, you may want to use a flashy color as an accent color.
The price is for one, so I think it is a little expensive, but I am satisfied with it.
View detail
Compact Cargo Hook
It does not protrude more than the Clubba and fits better. The Net Hook should be more compact to fit in the case of the Clubba. I used the same Posh face color SpoolM8x30mm and Stainless boltM8x105mm. View detail
inconspicuous (Compliment.)
Perfect Fitting View detail
Multiple positions collectively.
Purchased for setting up a DRZ400sm K9OEMCarburetor.
I bought this Motorcycle Carburetor secondhand, and the settings were so strange that I opened it up and found that it had the old-fashioned Kenso Bomb kit built in, and the Main was No. 167 … that's a no-no, of course.
For now, you can buy this Jet set and set the quantity to 140, which is the same as the standard one.:Set, and a large hole was drilled in the Air cleaner cover. (The purpose is to increase air intake) I had blocked off all of the walls, but it looked like I hadn't completely blocked them off, so I raised the wall to 145, and then I was almost there! I removed the pig nose, and it became a setting that turned around beautifully and comfortably.
The amount of return on the PilotAir screw was also messed up, so I first returned it to the OEM standard and then repeated the fine tuning.
Although it is said on the Net that it is a thing in terms of accuracy, it is nothing special as long as Setting is available.
My concern is why the fuel economy of 17.5 km/liter is so far off from the Catalogue specifications and Large, even though I try not to drive fast with the Normal muffler in almost OEM standard settings. Why is this so?
At any rate, this Kit itself is a product that I can fully recommend, based on my experience using it.
View detail
Fits: KAWASAKI KSR Pro, KAWASAKI Ninja H2 SX, KAWASAKI Ninja 250, KAWASAKI VERSYS-X 250, KAWASAKI Z250 (2013-), KAWASAKI ZRX1200 Daeg, KAWASAKI ZX-10RR, KAWASAKI ZX-6R, SUZUKI gsx1100s katana (sword), KAWASAKI Ninja 250R, KAWASAKI ZX-10R, KAWASAKI ZX-6RR, KAWASAKI ZX-14R, KAWASAKI 1400GTR, KAWASAKI Vulcan 900 Classic, KAWASAKI W800
Is it normal... Is it?
Anodized went bald instantly when I did Wiring, but I'm happy with the cutting QUALITY! View detail
Fits: KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Ninja 250, KAWASAKI Ninja 400R (-2013), KAWASAKI ER-6f, KAWASAKI ER-4n
Easy
It is easy to install and very nice to be able to sequentialize easily. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-25R
I thought it was meant to be a dress-up?
[How is it used?
Used for daily Riding.
Was the one you received as per Image?
As per Image.
Was the installation difficult?
It is not difficult, but it took a lot of time to remove the OEMKnock Pin and it is covered with scratches. I think the removed OEMKnock pin is not reusable.
How was your experience with it?
The OEMDisc Rotor is not a part that can be used all the way to the end, but it is not a part that can be experienced.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It is not a Large Parts, so only those who know about it will notice it.
Other items that would be helpful
Installation Point or hang OEMKnock Pin should be pulled out well. Tightening Torque Management 。 /Instruction Manual's No・Easy to understand ◯/Cautions It is better to replace the Rotor when it is new than to use it after it is worn out /Items to be purchased together None/Opinions and requests to Manufacturer Silver anodized would be good
View detail
Good feeling
The Blinker light emitting part is covered by the Number, so I bought it to expand it outward.
Used for KOSO LED Blinker
It's a nice miscalculation to have a CinderellaFit that looks like it's made to measure, even though they are from different manufacturers.
Satisfied with no cheapness in the texture
View detail
Mirror Hole Cap
I bought this to hide the Mirror hall as I changed my CB223S to a Bar end mirror.
Note that the quantity is 1 pc.
If you value cosmetics, you can use Homsen Screws or Vinite.
The texture is good
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX1300R
Isn't the price too high?
The anodized treatment is also very colorful, and the handlebar area is now more colorful, giving it a more luxurious feel. However, I wonder if the price is too high. View detail
At a glance, it looks unreliable, but I use it without problems!
[How is it used?
Since the suspension of CB50s was diverted, the washer of the banjo bolt was replaced together with it during the maintenance of the brake.
How was your experience with it?
The Aluminum Washer does get saggy over time, but the replacement provides peace of mind. Fluid does not leak, and it can be used without any problems.
How did it compare to other products?
At a glance, the quality may seem poor, but I feel safer using it because it is made by POSH rather than a cheap, inferior product.
[Points to note]
Use the product in accordance with the specified Torque. Do not use force.
Since it is a consumable item, it would be easier to replace it at a lower price, but it is a manufacturer's product, so I guess it can't be helped.
View detail
Cowl stop.
The 900SS has a spacer and bolt that fly out of place due to vibration, and the front cowl that holds the spacer in place needs to be mass-tightened regularly as the bolt will loosen if you are not careful. Posh rubber is similar to the OEM product and I think the quality is even better. View detail