Reviews
To the detriment of Down fenderization.
MONKEY125 is set to Down fender.
Brake hose that will play around with you.
I bought it to fix it.
*To Tireetc. without fixing
I don't think there will be any interference, so I am self sufficient.
OEM Bracket Location
I wanted to install it.
Cutting the Handlebar to Right
In the Air Filter box.
It hit me.
We installed it in a slightly lowered position.
39π and is Exactly.
Rubber sheetetc. to prevent scratches.
I recommend 41π for those who want to put it up.
I use Vinyl Tape on the inside.
I've responded by pasting it in.
I don't know if it works lol.
View detail
Fits: HONDA Super Cub C50, HONDA Super Cub C70, HONDA Super Cub C90, HONDA little cub, HONDA Super Cub C50, HONDA Super Cub C70, HONDA Super Cub C90, HONDA little cub
Position slightly higher on the waist than OEM!
The OEMSeat has a slippery surface, which is good on flat terrain, but when going downhill, it makes your ass gap forward (sweat).
Especially on long descents, this makes it difficult to turn the Curve because you have to maintain your posture with your arms and footpegs…
From this downhill experience, buy here!
The epidermis is coarse and stitched.
My ass is a lot less likely to gap forward.
And the Seat is about an inch or two thicker than the OEM.
The footing might be worse.
Gentle on the ass sounds good!
If you've been riding for a long time and you're thinking of replacing the Seat, you're in for a real treat.
Is this cheap enough for you?
If you want to make your custom look cool and thin, this may not be the right choice for you.
It's a thick seat, so it's not very stylish…
View detail
If you just want to use it, this will do the trick!
You may want to relocate Mirror quite a bit and use it, right?
With OEMs, it's often attached to the switch box or rebar clamp, and this is handy when you want to get it out of the way.
This type of product is available at PinDrill, but if you just want to relocate it, this is good enough for you.
View detail
Cost-effective License Plate Light
I bought it for the ZX-11
It is easy to install as it is tightened to the number of bolts
Wiring is no problem if you connect it with the Bullet Terminal and Coupler Mm
And the light is perfect! It's too bright
You can choose the color of the License Plate Light itself, I chose Gold It was good for the price
License Plate Light is available from various manufacturers, but Isn't the License Plate Light here a pretty good cosmetic?
View detail
It's cacophony
Lever of Toggle is smaller than I expected, so it hurts my fingers a little bit (twang, twang, twang) When you put the blinker back, you have to tilt it back to the other side because of the loose feeling of operation I'm happy with Large for the look and feel of the product
The packaging and the Instruction Manual are very thorough, and even the patterned paper Seal for drilling holes is included I can feel the manufacturer's conscience in the fact that it has
View detail
It's too hard
I gave up using it because it was too hard at the time of installation
When I tried to install it, it stopped in the middle, and when I tried to remove it, I couldn't get it off, so I ended up tearing it up I removed it Some resolve to put it on with a hardness that is impossible to reuse? I'm not sure if it's necessary I like the color, shape and price, but I would like to see a softer Material
View detail
Fits: KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI ZR-7, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI ZR-7, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
good
Used on the ZrX1100's rear blinker Before installing this product, the front blinker has a front blinker made by POSH [Color] Installed a SmokeBlinker
FrontPOSH and Rear is a mismatched spec. called Jills, but the quality of both are It was finished without any discomfort due to its solidity
The only thing that bothered me was that there was a lot of BALI left on the product, so I had to tighten the screw as it was Sometimes it didn't close tightly enough and had to be sanded down
The POSH product could be installed without such a thing
View detail
Fits: HONDA CB400 SF, HONDA CB-1, HONDA HORNET 250, HONDA JADE 250, HONDA VTR250
Shifting on installation
There seems to be a variation in the accuracy of the screw hole on this side, and there is a slight deviation of about 1 millimeter when it is installed It was generated If you're interested, you may need to do some additional processing [Color] The Smoke look is very dark and cool! View detail
Cheap and easy to use
I installed in the 2017 SR. It is necessary to shave a little, but it is not a work that did a big charge. Also, we need M3's 15 mm Screw. Well, Screw is available at Home center as soon as possible. There are oddly high similar items, but I am satisfied with this item. Boobs Blinker, the atmosphere is good! View detail
Not bad
Bar End Since it felt that the insertion portion was Rubber little by little, I took a drastic change.
I think that it is good for the price.
I was able to install firmly.
As a precaution, the Screw accuracy of the Nut part was bad and could not be installed by idling even if it was tightened.
Tap cut it and it was safe to install it.
View detail
Fits: KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI ZR-7, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI ZR-7, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
Excellent compatibility with SmokeTail
I also exchanged this as Tail was made Smoke
Although it was not in the explanation, Amber 's Valve was also attached
However, both are double valves ...
Font Blinker is Double Bulb and it can be used because it becomes Position with Key ON ...
Rear is a poor position and angle in the mouth Gold Poses are different, so you can not use it as it is
For the time being, if it feels like Pin 1 pc. Once you scrape or drop it with Nipper, you can use it once.
Double Bulb has 2 contacts of Valve, but the TailBlinker part has only one point of contact, so if it is in contact it will light up when Blinker ...
However, because there is no Pin in one side, it can be said that it swings immediately with the vibration, so if you use Valve, you can get Valve's Home Center and AutoBacks around for Rear to get Amber's Single Bulb I think it's better to keep it.
In my case I replaced both LED Bulb back and forth
Although it is a point of caution at the time of installation, it is a feeling to tighten with a Tapping screw like Tail and dig into a thread, so once it is tightened, once it is tightened, it is sure that you take off the tuna and tighten it again
Since Crack enters or it is broken as you keep tightening up to the end as it is ...
This also has four holes Gap and Woundetc. There was not too good condition.
I am worried about that point if it is overseas cheap, but for GPZ it's a lot so there are few Rose stuffs so I guess ... (Lol)
Although I do not know whether it will be a reference because it is exchanged for LED Bulb, it was also that this time when Position also in the daytime, the brightness at the time of lighting is necessary and enough, the vehicle inspection will be cool
It is good because the price is also cheap and the atmosphere changes at a stretch
Recommendation for exchange with Tail lens
View detail
It looks nice - - -
Cospa is good. But it seems to be suitable for Rubber inserted in Handlebar, but there is no Instruction Manual. It was a failure in this way of attachment thought that this shape would be this one. I started running out while running at high speed. I fixed it with ServiceArea. I replaced it with the Rubber of the Bar End I used before and I am using it now. View detail
The product is nice..
I changed it to outside Fender and I made a hole in the Fender outside the company
I was too shocked to open it, so I was looking for something like that from Stubby's Bolt and came to this.
In the usual Cable guide, there was nothing like Bolt hole just sideways so that it could be used in the vertical direction
I bought this a little although I did a little price.
The thing itself is convenient, but was the color selected by me related?
It takes 2 months for delivery and it is just a little disappointing ...
I do not think there will be any problem if ordering it in high spirits
For those in a hurry it may be better to check the delivery date firmly.
View detail
Cheap to use
【What made you decide the purchase?】 Low price
【How was it actually used?】 good. Useable. Simple.
[Is there anything I was disappointed about?] At the time of temporary fastening, the attached Bolt could not tighten the hand. It was a work at a time but I felt uncomfortable.
【Hope for Manufacturer - Please tell me if there are any improvement points?】 Improvement of Bolt, Tap.
【Have you compared items?】 None
[Others] It attached to KDX 125 SR purchased in second hand.
Mirror used what I had in home Garage.
View detail
Small Baumend
I thought that it was more delicious though it was a selfish thought but it was not Small except it. By the way, the size of this was not written. The thickness is the same size as Millibar. It was nice to have one more deck. Well that would be impossible to buy at this price.
There is absolutely no problem building. It is securely installed.
It is pretty bright Blue.
Rubber is also LargeSmallQuantity : 2pc. Each one has a set.
View detail