Reviews
Active Tail Tidy
Instructions in Japanese only, but the pics were enough to get by. Probably easier since I already fitted an R&G Tail Tidy that was s shocker in terms of leaving all of the wiring exposed and vibrated uncontrollably due to the single flat plate design. Don’t get an R&G for your H2 SX or SX SE!! The Active eliminator is so so much better. And has a proper plug for the number plate light...shame I cut mine off to fit the R&G eliminator!!! This product fits well, looks great and doesn’t vibrate!!! View detail
H2 SX SE - ACTIVE Fender Eliminator
I fitted an R&G eliminator that cost me over $200 and although it fitted ok, it was essentially just a set of two flat plates that had no cover for electricals. So I had to tape up all of the wiring and was very untidy. The worst was yet to come as the flat plates vibrated terribly. Never happy with the set up!! So I decided to try the Active Tail Tidy. Besides getting instructions in only Japanese, the pictures helped a little and the kit fitted really well and it protects and neatly hides all of wiring, (that took me over 30min to strip off the special waterproof tape I used for the R&G kit). Additionally, the R&G kit had different connectors so I had to cut off the bikes original tail light connector, and guess what... the Active kit had the correct connector!!! So it was a shame that I cut off the original as now I’ve got shitty connectors to fit a great kit. I found that the panniers are now touching the indicators, but I’m going to have a go at bending the side plates slightly forward that should fix this issue easily enough. Stay away from an R$G and get an Active kit !!! View detail
Fits: KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2SX SE
It was a product as expected.
There are several Fender Eliminators of H2SXSE, but in my case Fitting, Number and Blinker interfere with Fender Eliminator in connection with wearing the GIVI Top case, so existing products are irritating right…
Since it was made ACTIVE made at the time of 14R, I purchased it because I got out waiting for commercialization from ACTIVE.
The fitting feeling is as expected, Blinker changed to Slim type, so GIVIFitting did not interfere Limit and was satisfying Large.
In the manual "OEMPannier impossible" Is there a ...
If it really can not be installed it may be better to include it in webike's item description.
I am irresponsible as Pannier pear.
View detail
Silhouette will be better
As a matter of fact there are not many people who want to get close to Race cars even if they ride a little on the SS?
I do not like the back of the OEM.
So I bought this item.
Stable Active made and installation was possible without problem.
I thought that it looked a little like a Race car!
This item Reflector is sold separately so do not forget to purchase!
View detail
I refreshed very much!
It was very refreshing and it became even cooler!
I think installation is easy except for Blinker.
The installation of Blinker was very difficult and it took quite a while.
I did not understand well that Instruction Manual was only written quite easily.
There are people who are giving way to do it by Net so I think that you can work without problems if you refer.
View detail
I had trouble installing Blinker
I'm very pleased with the items on the Image street.
As Blinker could not fit along with the rattling-prevention Rubber according to the Instruction Manual, it is reversed to the contents as described.
There was absolutely no problem except for habit of installing Rubber.
View detail
Rear Clear! Parenthesis エ エ
I feel a little expensive, but I was satisfied when I saw around Rear after installation!
LED can also be installed with no need for processing such as connector exchange with a good feeling.
Parenthesis is Ee
View detail
LED is beautiful. Appearance Refreshing. Visibility Up.
Purchased for the purpose of Slim appearance.
However, due to the brightness of the LED, the visibility from the rear due to the height of the installation position Up, the scare feeling behind the car dropped by Large.
I feel relieved.
Installation is not difficult, but in the process of adjusting the position and final tightening from the temporary stop, it is rather difficult to insert the tool from the temporary assembling gap, the work was quite severe.
When final tightening, whether to remove the temporary work once, whether to put a tool in the gap, such as.
However, once you have decided the position, it does not matter so much, so overall satisfaction is quite high.
View detail
Only the mounting order...
Although it proceeded as instructed, blinker and License Plate Light 's Wiring processing was done and the temporarily assembled one was replaced by Rose. It was hard to process because the notch for passing Body's Wiring is Small.. Were you familiar with it, did it correspond to it by cutting away notches in advance? Maintenance It was awkward to me of amateur.
The accuracy of the parts of Others was high, I thought that it was Mr. Active.
View detail
It is Well, Refreshing.
Anyway I wanted to remove Normal fender like shippo I bought it
Japanese Vehicle Inspection Correspondence, Rear Refreshing
Since the LED License Plate Lamp has a Connector, it will not be reversed
Reflector is sold separately! It does not correspond to Japanese Vehicle Inspection. is
There is no problem if you do according to the instructions "Installation" I think that I can do it. "attachment" Ha!
Then what is the problem is Normal fender removal!
The dismounting of Cowl of SS is truly Mendoi!
Also, although it is also written in the manual "Block CowlInner's hole with Tape" There is a
It seems like luxury, but this is also the place I want Plate to cover.
View detail
It is good except for Reflector.
I thought of COSPA and made it ACTIVE.
Installation was also no problem, but because I do not like the shape of Reflector, I purchased separately.
If you change to the shape of DAYTONA, it will be more expensive.
View detail
As expected it is ACTIVE.
License Plate Light with Black tone LED and R6's ass is Parenthesis better. If you do not put Reflector separately, Reflector is also perfect with choice of Small Shime. View detail
Steel is good
It is Steel who chose this product.
Compared with Fiber, it will not crack due to vibration.
Another is to be able to use Loading Hook by partially processing OEM's Fender.
I am also satisfied with Silhouette.
View detail
Fits: YAMAHA FZ-8 FAZER, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-8
It is very different SMART
attachment - accuracy
It is not a place that requires accuracy, so I do not feel a problem in particular.
Also regarding installation, it is very simple because it is different depending on the type of car, as well as Wiring is properly classified and explanation of the connection is also very easy to understand.
I just had a hard time removing Tail cowl w
I think that it is good to refer to the service manual, the blogs of the installed people at the time of installation.
quality - Texture
The finish of Anodized does not feel cheap well and I think that it is very kind with One - touch coupler etc.
Only one point, if you take the corner of the cutting plane, you will get injured etc. I think that it is few and good,
Well after tight fitting I do not touch it so much and I talk about gloves, but I was a little worried.
shape
It is very SMART and Sense is also good because the original was pretty awkward,
However, because the defense power of the muddy drops, it is necessary for the rainy day to prepare, but well, which Fender Eliminator is the same.
Feeling of use
I am very happy with Stylish,
As for Reflector, I thought it would be nice if it should be included at the beginning, but I think that it was good to purchase separately because there is shape preference.
Cost performance
Is not it quite good if you think that it is a thing corresponding to each model rather than Universal Product.
View detail
I can recommend it.
Material : Unlike products that are likely to crack due to vibration of FRP, the sense of security unique to the Gold genus.
Apart from Wiring it is appreciated that it can be installed without processing.
Because of the pretty big Loose hall related to the above, Washer is also big, but it was still better if it was Black like Body instead of Uniqlo plating.
View detail
Standard product
Previously CBR 1000 RR (SC57) , Currently used at WR 250 R.
Reliable with making it robust.
The number of parts is somewhat larger.
View detail
Unexpected effect ...
Every time I used Rear stand, I was hitting Rear Fender, so I bought it for the purpose of improving maintainability.
As for the installation, the Instruction Manual was also solid, so there was no problem (working time 0. About 5 H)
There is an unexpected effect ... Because it was lighter than OEM or because the end part was lightened ... It is easy to walk around. Even if you get on, you can feel it well, I feel lighter than usual. It was a pleasant miscalculation.
I am also solid making and it was good..
View detail
Perfection of details is also perfect
I compared a lot, but purchase if it is Active if it does not matter.
License Plate Light's Coupler is also attached and it is perfect Bolt-on.
Because I'm on the old car alone. I was slightly lost for removal of Cowl, but I think the product is perfect.
View detail
I like Design
Although it is sold from various Manufacturers,
Design (My preference) When
I decided Active by price.
Because quality is good, you can install it without difficulty.
It can be done in about 15 minutes.
(Removal of Blinker was troublesome)
I made my own Reflector.
It is satisfying because the Rear around is clear.
After that when the road surface is Wet What kind of silk?
View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SF
Product is generally satisfactory, but the installation procedure lacked explanation
Product quality - Shape etc. Is generally satisfactory, but the evaluation in the following points 4. It is 6.
? The explanation of the procedure to remove Tail cowl is too easy, I do not know where to remove Screw.
I would like the Main plate and License Plate Bracket to come together from the beginning.
? OEMReflector can not be used, so I want you to incorporate it into this kit.
? Adhesive is required for Rubber molds installation, but it is not included in Kit.
View detail