Reviews
I think it's less likely to be used for its intended purpose…
[How is it used?
Tandem Footpeg removal Bolt hole concealment.
Originally intended to be used for in-vehicle fixation, etc., the Situation
The purpose is almost exclusively for dress-up as it is thought that there are not so many
Was the one you received as per Image?
As per Image. BabyFaceLogo was on the back.
Was the installation difficult?
No difficulty. Just screw it in.
How was your experience with it?
Small and unobtrusive, but usable for its original purpose.
I think
[Included Parts:were they on?
Mounting Bolt?2
[Was there anything that disappointed you?
As mentioned in other reviews, the bolt is too short.
It is too big to be used. Prepare a long one.
Other items that would be helpful
Installation Point or hang The accuracy is so good that hang is not needed. /Instruction Manual Yes, clarity ○○/Points to note Included Bolt is short /Items to buy together Opinions and requests for M8 Bolt/Manufacturer longer than included I wish it was available in Silver anodized or Titaniumium alumite.
View detail
Attention ! Use only as a replacement for the passenger footpeg supports
Very nice racing hook, but impossible to use without removing the passenger footpegs and therefore the mounting bracket for the exhaust...which makes these beautiful objects unusable for riding. Very functional for transporting the motorcycle as a fixing hook but which will have to be dismantled to ride. In the end very little interest... Very nice racing hook, but cannot be used without disassembling the passenger footrests and therefore the exhaust mounting bracket...which makes these nice items unusable for riding. Very functional for the transport of the motorcycle as a fixing hook but that it will be necessary to dismount to roll. In the end very little interest... View detail
Weight saving
I'm using it on my ZX6R 2015 EFMODEL.
You just need to replace the Tandem Footpeg on the other side of the Exhaust System, but the installation is quite large and strange.
Quantity:Pair (for Left and Right) You will need to remove the upper part of the Side cowl of the MainSeat and remove the MainSeat to access the Bolt.
When I replaced it, the weight was reduced by about 500g, but I didn't really feel the effect. I think it is better to install this product when riding on the Circuit as it eliminates the possibility of damaging the Tandem Footpeg in the event of a fall.
It is also very useful as a point to hang the Tie Down Belt when loading the Transporter.
There are few places to hang the hook on SS etc. full cowl motorcycles, and there is a risk of scratching the body.
I think the price is a little high, but I think it is carefully made and has a dress-up effect.
I also appreciate that I can choose the coloring so that I can decide whether to use Black for Natural or a prominent Gold color.
View detail
Easy to Install, Nice Color
Like the matching color and fits perfectly Very good. View detail
For Transporter
I have removed the Tandem Footpeg and am using it for a light Transporter. View detail
I installed it to get the Left Side Balance.
Since I replaced the Right Side Tandem Footpeg with an Exhaust Bracket, I had to remove the Left Side Tandem Footpeg for balance. However, there is no bracket for Tie Down, so I installed this Racing hook.
The thing is sturdy and there is no problem at all even if it is tied down tightly.
Since I chose the color Black, it doesn't stand out, but I felt that the Accent was effective in one point.
This product can be recommended to a wide range of people, from those who load Transporter to those who want to dress-up.
View detail
Required for loading.
Tie Down Hook as a hook when loading.
It's safer than putting it on a frame.
It's well made.
View detail
Looks and weight reduction
Since I will be doing a lot of circuit driving, I installed a scale to reduce weight and appearance.
For removing the Tandem Footpeg and hooking the Tie Down Belt when loading the Transporter.
View detail
Hole Pitch does not match.
The hole Pitch does not fit in the first place. The one which I bought in a certain Amazon is good, and I wanted to buy another one, but I bought it here because it is out of stock. If the hole is Gap though the product number and the model number are the same, even the outside dimension is different. It is not impossible to use if the hole is made big through Drill. I'll put a comparison picture on it. View detail
First of all, the hole Pitch does not match.
I compared it with the one I bought at another certain Site. The one from a certain Site sticks normally, and the one I bought here does not. View detail
BABYFACE shape hook base
Material: cnc cutting quality is very good; function: decorative purpose. Purchase and installation experience: I removed the rear pedal and need an ornament. The delivery time is very fast and the goods will arrive at around 7 o'clock soon. I am very satisfied! View detail
Easy installation
Customization after removing the rear footpeg. View detail
Racing hook
I don't think it's too bad, texture-wise.
This is a typical Babyface product!
View detail
To One point Accent.
I bought it to add Accent color to my Transporter rather than to load it.
Because I removed the Tandem Footpeg, I was a little lonely around the Rear, but Gold is Impact enough! (Lol) 。
If you don't want to stand out, you can recommend Black.
View detail
Refreshing
I bought it to refreshing the Left SideRear because I don't do Tandem and I don't load luggage. The size is very small. The size is small but you can wear two Tie DownHooks. View detail
I like it.
[How is it used?
Tandem Footpeg was removed and I put it on.
Was the one you received as per Image?
As per Image.
Was the installation difficult?
Easy
How was your experience with it?
It can also be used as a luggage rack
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
Not particularly
View detail
Better cutting accuracy and improved appearance
[How is it used?
KAWASAKI Kawasaki:Exchange from sub footpeg with purchase of Single seat cover
Was the one you received as per Image?
I bought it with trust because I had set Rear Sets to Baby Face beforehand.
I'm very happy with the product I received, it's well made and large.
Was the installation difficult?
It's a simple job to remove and replace the screw.
How was your experience with it?
No special feature because it does not improve the performance of Motorcycle.
Is it just a little lighter?
[Included Parts:were they on?
Special Screw and Sticker are included.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Quantity of One Side:Because it is a set, if you want to attach it to Both Sides, you need to buy two.
View detail
Racing hook
I bought this while I was in Single Seat.
Quantity:Pair (for Left and Right) If you want to attach it to a Quantity:2pc. Note that Set is required.
The texture is great!:2pcs. (for Left and Right) If it's this price, it's good for the cosmetics.
View detail
Introduced by Dress-upMain
Since there is no Tandem schedule, it is introduced mainly for Dress-up purpose.
I like the texture of the Gold, and the footpeg is also Babyface, so I like the sense of unity.
The rear area is now SMART and has a so-called Race ish feel.
From a practical point of view, it is for fixing when transporting, but since it doesn't transporter, I don't get any benefit from it...
Because the Tandem Footpeg interferes at the time of the pre-road adjustment of Rear suspension, the pre-road adjustment might have become easy. But I don't adjust it so often.
Nevertheless, the color is good, it seems to be strong, and it is not cheap, and I am highly satisfied with this product.
View detail
BABYFACE Racing hook
Product was good, but the 4 bolts that came with it were too short to attach!
I purchased and installed 4 separate 15? long Bolt.
View detail