Reviews
Required for brembo products
What made you decide to buy?
The brake reinforcement that I have envisioned since I took delivery of my ZX-6R!
[How was the installation?
The banjo bolt that comes with the Brembo caliper cannot be used with the buildaline because the thickness of the banjo adapter is different. The banjo bolt supplied with the brembo product can be used with the OEMBrake Adapter.
When replacing the Brake Fluid, be careful not to touch the Cowletc. with your hands because the Brake Fluid will damage the painted surface. In case of emergency, we recommend that you store water in the bucket and wash the Fluid after touching it! We recommend that you wash the Fluid after touching it.
Please note that there is a law that states that only the owner of the motorcycle or a licensed mechanic can perform maintenance and parts replacement related to the brake. I am a former Owner." Please use this as a reference only, as we have performed maintenance on the
View detail
Active Fitting Adapter for brembo capliper
This is very good website to buy a stuff on internet. They provide a lot of brand and item to choose and always in high quality. They customer service answer any problem to me very fast. It make me feel confident to buy things in their website. View detail
Used for Separator made by Active
If you use Separator, use this double bolt
Texture is fine.
Quantity when tightening:Care is taken to keep the 2pc Hose in place.
View detail
ActiveBanjo bolt
I'm happy with the color MaterialLarge strange. More to come.
I'm going to use it.
View detail
very good
The brake cable of the original car was not long enough because the handlebar was changed to increase the height, so the whole brake cable was replaced with a new one. The left side of the ZX-6r front brake uses this two-way hollow bolt, so I bought this ACTIVE. Perfectly matched with ACTIVE tubing joints. The price is not expensive, and the price/performance ratio is super high. The color is also beautiful. ---------------------------------------------- Because of the change raised handlebars, original car's brake line is not long enough, and with the brake lines on a whole new one. ZX-6r front brake with the left side of this is two-way hollow bolt, bought ACTIVE of this. ACTIVE hose connector and a perfect match. Inexpensive, high cost. Color is also nice. Powered by Google Translator View detail
Brake line for new construction (2)
I bought it to coincide with the return of the OEMSeparator, and it was purchased at the same time as the Single.
Both the brembo and this car have Pitch 1.0 around Brake so I don't have to mix them up.
View detail
2 that could be used for the Edge line
To change Banjo to Stainless Steel, the Bolt is also made of Stainless Steel Search for Steel
I chose Active because it's cool
Swage bought by Stainless banjo in Active when I went to Naps later I see they sell one that is 2mm thinner than the one on line and I'm in a cold sweat!
I'm so glad I didn't have to use it
Manufacturer's to be sure..
View detail
Caliper to brembo!
I bought it to convert Front caliper to brembo. I think everybody understands brembo, but Pitch is different. P1. 0 is.
The thing is solid, too..
View detail
It can be tightened securely. Less fading.
There are two sides width than Banjo such as PLOT and it can be fastened tightly.
Since it takes a width only by that, if care around Handlebar is Tight, you may need to be careful.
I think that the point that there is almost no fading is very good.
Almost outdoor storage, the degree that it has become thin in 10 years or so.
It may also depend on the lot, but Active's on the whole
I feel that there is less color loss.
View detail
When I tried to change the brake hose, the banjo adopter was 1mm bigger. And using them double, the oil line goes out of position. So I bought this right away. Luckily I found it on WEBIKE and they had the stock. And thanks for the quick shipping
When I tried to change the brake hose, the banjo adopter was 1mm bigger. And using them double, the oil line goes out of position. So I bought this right away.
Luckily I found it on WEBIKE and they had the stock. And thanks for the quick shipping.
The part is made by GOODRIDGE and it is packaged in ACTIVE as I show in the picture.
The fitting was great since the hose, banjo adopter and banjo bolts are all by ACTIVE.
I recommend this not just it is reasonable price but also is made from stainless, no worry to be worn out.
View detail
[ -- the web!ke Monitor ] -- although it is cheap, structure is solid, and there is a high grade feeling very much. Dramatically satisfied with it, since it seldom sells to the article store.
[ -- the web!ke Monitor ]
-- although it is cheap, structure is solid, and there is a high grade feeling very much.
Dramatically satisfied with it, since it seldom sells to the article store.
View detail