Reviews
Stainless Steel
The quality is satisfactory with reliable Stainless Steel. View detail
Required for brembo products
What made you decide to buy?
The brake reinforcement that I have envisioned since I took delivery of my ZX-6R!
[How was the installation?
The banjo bolt that comes with the Brembo caliper cannot be used with the buildaline because the thickness of the banjo adapter is different. The banjo bolt supplied with the brembo product can be used with the OEMBrake Adapter.
When replacing the Brake Fluid, be careful not to touch the Cowletc. with your hands because the Brake Fluid will damage the painted surface. In case of emergency, we recommend that you store water in the bucket and wash the Fluid after touching it! We recommend that you wash the Fluid after touching it.
Please note that there is a law that states that only the owner of the motorcycle or a licensed mechanic can perform maintenance and parts replacement related to the brake. I am a former Owner." Please use this as a reference only, as we have performed maintenance on the
View detail
Active Fitting Adapter for brembo capliper
This is very good website to buy a stuff on internet. They provide a lot of brand and item to choose and always in high quality. They customer service answer any problem to me very fast. It make me feel confident to buy things in their website. View detail
Used for Separator made by Active
If you use Separator, use this double bolt
Texture is fine.
Quantity when tightening:Care is taken to keep the 2pc Hose in place.
View detail
Banjo bolt as expected!
It is an ordinary Banjo bolt.
This time I wanted to keep the Caliper surroundings in Black and Silver, so I went with Black for the banjo bolt!
After installation, I'm very pleased, especially since the Fluid isn't leaking out!
View detail
ActiveBanjo bolt
I didn't see the color you were looking for!
They had it here and I bought it immediately.
Very good with a wide range of products!
View detail
ActiveBanjo bolt
I'm happy with the color MaterialLarge strange. More to come.
I'm going to use it.
View detail
exchange
I bought this to install brembo radial brake master cylinder.
I chose Stainless black to match the color of the brake hose, which is black.
It's subtle that the silver packing stands out against the black, but it can't be helped.
View detail
StainlessBlack
I bought this Stainless Steel Black to replace the brake hose and unify it with Black.
It looks good, but I wish Washer was also Black, but I guess I can't help considering the Sealability Material.
I wish the price was a little lower.
View detail
very good
The brake cable of the original car was not long enough because the handlebar was changed to increase the height, so the whole brake cable was replaced with a new one. The left side of the ZX-6r front brake uses this two-way hollow bolt, so I bought this ACTIVE. Perfectly matched with ACTIVE tubing joints. The price is not expensive, and the price/performance ratio is super high. The color is also beautiful. ---------------------------------------------- Because of the change raised handlebars, original car's brake line is not long enough, and with the brake lines on a whole new one. ZX-6r front brake with the left side of this is two-way hollow bolt, bought ACTIVE of this. ACTIVE hose connector and a perfect match. Inexpensive, high cost. Color is also nice. Powered by Google Translator View detail
Brake line for new construction (2)
I bought it to coincide with the return of the OEMSeparator, and it was purchased at the same time as the Single.
Both the brembo and this car have Pitch 1.0 around Brake so I don't have to mix them up.
View detail
Pitch mistake!
in installing the brembo MASTER and Caliper, I had to do the whole thing with Hose and I replaced it to match When I took it around according to OEM in a domestic car, the pitch was 1.25 Banjo You have to buy a bolt, so be careful not to buy the wrong one (brembo is 1.00Pitch) View detail
OK
I ordered it to replace the mesh hose
It's for a specific Banjo adapter, so it's very short even though it's Double
Beware of buying Hose, Banjo adapter and Banjo bolt from RoseRose is required
I couldn't use it myself
The color and construction are perfectly fine, so it's something you can inquire about before ordering
View detail
2 that could be used for the Edge line
To change Banjo to Stainless Steel, the Bolt is also made of Stainless Steel Search for Steel
I chose Active because it's cool
Swage bought by Stainless banjo in Active when I went to Naps later I see they sell one that is 2mm thinner than the one on line and I'm in a cold sweat!
I'm so glad I didn't have to use it
Manufacturer's to be sure..
View detail
The Brake line gathers.
I tried it in combination with Active's Stainless banjo, Goodridge's Stainless Steel Hose. Since I bought it with Net, I went with careful selection of parts.
Caliper I tried handling my h type. Aluminumwith Color Banjo gradually faded etc. Spec. Although feeling comes out, there is the texture of Stainless Steel and it becomes very cool when unifying with Hose, Banjo. In addition, it is good that Washer comes with the required number.
View detail
Caliper to brembo!
I bought it to convert Front caliper to brembo. I think everybody understands brembo, but Pitch is different. P1. 0 is.
The thing is solid, too..
View detail
It can be tightened securely. Less fading.
There are two sides width than Banjo such as PLOT and it can be fastened tightly.
Since it takes a width only by that, if care around Handlebar is Tight, you may need to be careful.
I think that the point that there is almost no fading is very good.
Almost outdoor storage, the degree that it has become thin in 10 years or so.
It may also depend on the lot, but Active's on the whole
I feel that there is less color loss.
View detail
Even though there is no stock
First of all, this product was out of stock, but I am using the same product of the company, I think it is a good product.
So it can be recommended as a product.
However, simultaneous ordering of Gun meta's Single and Double, simultaneous checking of inventory of Double Manufacturer takes 5 days and no stock.
In the meantime, Single is confirmed and the same Manufacturer same color product is not available so we confirmed that it can not be canceled "Exchange at customer convenience is impossible" Answer by.
I suffer from understanding where Cancellation is due to my circumstances.
I do not bother to bother to change the color of this hand every Caliper.
And yet "Manufacturer stock out" The buyer is in a selectable state.
Whoever is shopping at here is hurrying, it is hard to place an order on hold when ordering, unless all items are available.
View detail
When I tried to change the brake hose, the banjo adopter was 1mm bigger. And using them double, the oil line goes out of position. So I bought this right away. Luckily I found it on WEBIKE and they had the stock. And thanks for the quick shipping
When I tried to change the brake hose, the banjo adopter was 1mm bigger. And using them double, the oil line goes out of position. So I bought this right away.
Luckily I found it on WEBIKE and they had the stock. And thanks for the quick shipping.
The part is made by GOODRIDGE and it is packaged in ACTIVE as I show in the picture.
The fitting was great since the hose, banjo adopter and banjo bolts are all by ACTIVE.
I recommend this not just it is reasonable price but also is made from stainless, no worry to be worn out.
View detail
Although the Front kit of the ZEPHYR750 was purchased and attached from the first, the additional purchase was carried out in order to change, since the settlement is bad in any way. Although the Front brake of the ZEPHYR750 is a Double, the Jo
Although the Front kit of the ZEPHYR750 was purchased and attached from the first, the additional purchase was carried out in order to change, since the settlement is bad in any way.
Although the Front brake of the
ZEPHYR750 is a Double, the Joint (43061-1068) for exclusive use is used in the place branched in the place of a Fork.
Since there was no place fixed well when it was a ZEPHYR750, although it became attached T Joint
without using the Joint when T2 of the Kit according to
vehicle type was used, it had bound by the Cable tie, but it was in the state where it is not unsatisfactorily pleased.
I hear that T Joint was stopped since it was
, and the parts here are needed since it decided to employ a pure Joint efficiently.
The company's Banjo adapter was added to the portion connected with a pure Joint, and it carried out by fixation with this Bolt.
Since
head became the appearance which is hidden in a Joint, the path was anxious, but it has been used especially satisfactorily.
Since the side which comes from the
MASTER makes two 共締め the Caliper side, the Banjo bolt of a Double is required for it.
Let's carry out as [ forget / between / to pinch a Gasket ].
Since it will break if it fastens with an unreasonable Torque since it is the
Aluminum, cautions are required.
View detail