Reviews
Rigidity is solid.
Quick release braceShaft Type2 requires Quick Release Brace Clamp (sold separately).
You can also choose from a variety of color variations, so you can change the color of the Clamp and Shaft.
It is different from paint-like gloss.
Mounting is Clamp's ScrewQuantity:Fixed with 2pc
View detail
Importance of in-place information
The product itself is fine. The color is also good, close to Fork.
I bought it without paying attention because everywhere I looked it said that 187mm was good or best for jc61etc. groms, etc. ….
With this length, the clamp can only be attached to the rounded part of the handlebar. It is possible to attach the clamp by forcibly tightening the screw. It is indeed a good parenthesis in terms of position.
Personally, I think that it would be better if the clamp and handlebar were mounted on the flat surfaces of each other, so that they are rigid and the handlebar is not damaged. I think this is a good idea.
It was an expensive study.
View detail
Fits in with the styling of the Monkey 125
About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with a chrome plated surface. About the feeling of use, Smooth shiny surface with sharp detail that fits in with the styling of the Monkey 125 while also adding some rigidity to the aftermarket handle bars. Products to buy together, Some chrome plated rear shock absorbers like the ones available from Takegawa would be ideal to also add to your cart to help complete the look by removing the original red shock absorbers and adding a firmer ride to the rear end. Difficulty of installation, I can say the fitment of the brace shaft for my installation was very easy due to the ease of access and simple nature of securing the brace to the handle bars with the brace clamps from Posh. Cost performance and comparison with other products, The pricing of the product is great. You receive a brace made from a quality material with a high quality surface finish to match. There are a few options around the same price but most are more expensive and don't have the chrome plated finish I was looking for to match the handle bars. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Very good quality
Very good quality. Precision built. Looks good. Lightweight and solid. Glossy finishes are more scratch resistant than matte finishes. This is the black one and doesnt scratch as easy as the "Mat titanium". I would definitely recommend this. View detail
Great quality
Great quality. In the end I could not use this for what I wanted to do, but the product is great. I would definitely recommend this. Very good construction and manufacture quality. The finish is easy to scratch though. It looks good also. View detail
Fits CT110 HUNTER CUB
Fits CT110 HUNTER CUB at 226mm.
The Smartphone Holder was attached to the Handlebar, but has been repositioned here.
View detail
good
I used to install a Blue one, but recently I thought it looked childish, so I decided to use the same Plating color as the Handlebar. I have been installing a Blue handlebar, but recently I thought it looked childish, so I decided to go with the Plating color, which is the same color as the Handlebar. View detail
Fixing essentials trigger
Installed together with POSHSuper Motorcycle Bar. The old one was not a Quick Release Clamp, so it was a bit large, but it is still extremely convenient. I usually use only a waterproof digital watch and a compass in case of stormy weather, but it is really helpful when I have a lot of things I want to attach, such as a smartphone, a radar search, etc. It is essential items in this day and age. View detail
diversion
I have it on my WR250X.
Made by HURRICANE was short, so I went with this one.
Made by HURRICANE Clamp also worked fine.
View detail
Good texture
I purchased the zrx1200daeg because the Handlebar area was too tight to fit the Smartphone Holder and USB power supply.
Although a Handlebar Clamp needs to be purchased separately, I am satisfied because the Smartphone Holder and USB power supply are mounted a little higher than the Handlebar.
View detail
To the extended Base of Attachment.
With this bar, you can put a Smartphone Holder, a clock, a Cameraetc.
It can be installed in various ways.
Prevention of Handlebar bending during Accident and
Vibration reduction may also be expected.
View detail
Repeat Purchase
I replaced the Gold color that the previous owner had with Black. I am satisfied with the color as it has calmed down a lot as I had hoped. Durability (Painting) The Black color looks poor compared to the Gold color, although the Gold color did not peel off even when handled roughly. I will review in the future. View detail
It is useful except for
It has a wide range of uses, such as attaching an additional meter, fixing a Smartphone Holder, etc. Vibration from the handlebar has also been reduced. I don't like to scratch the handlebar when I remove it, so I put a piece of sponge on the clamp part. View detail
Good
There is no problem with the texture. It was easy to install (about 30 minutes). I had a hard time deciding on the length, but I think 187mm was a good length for me. I also refreshed the handlebar area, and I'm glad I bought it. View detail
I wonder if it's a custom that can be done easily.
I wanted to add a small bag around the handlebar of my Honda, Grom and JC92, so I installed this Handlebar Brace. The color is Gold, and it's a nice color that stands out.
Clamps (sold separately) are required for installation. It's a bit of a pain to get the angle just right, it's wobbly and hard to get it straight. I went to the home center and bought a Gold Stainless Spring Bolt, which is 2mm longer than the supplied Bolt, and a Quantity of M5×20mm Bolt.:I bought 2pc and used it.
I think the vibration has been reduced and my hands are less tired. I have not yet tried to attach the bag, which was my original goal, but I am satisfied with the vibration reduction and the easy custom look! I'm glad I tried it!
View detail
Be warned! make sure you measure the width of your handlebar. Please also be notice that it DOESN"T come with the clamp. Good material as you can expect from Posh. View detail
It's just like the image.
I bought a posh clamp and used a shaft that I had on hand, but I couldn't feel any difference before I installed it. I bought this one because I didn't like the position of the shaft.
The product had a good texture and the color was as per Image. In addition, naturally, unlike the Shaft that was diverted, I was able to install it exactly without processing.
I was quite confused between 206mm and 187mm, but since the shaft I used was generally 216mm, I thought that there was not much difference between the 206mm and the 187mm and could not expect any change, so I decided on the shorter one.
The Handlebar is a HURRICANE European1 type, and the position of the Brace is as per the Image, and when I used the Shaft, the position of the phone was too high for my liking, but I think this is a good fit. I was able to set it about 2cm above the OEM Handlebar Holder, so I was able to move the Radar and my phone to a position where I could see them better than when I had it cinched to the Handlebar Holder.
I think you should be careful not to put the wound when you fasten the clamp or install the electronic equipment.
View detail
Ideal for increasing the rigidity of the handlebar area
I've read some people's impressions that Handlebar shakes a lot when it's stopped. I didn't have any problem.
So, if you want to increase the rigidity, it would be good to add it.
View detail
Handlebar rigidity
I was expecting the stiffness of the Handlebar, but it's just an appearance Part.
It looks Custom, so I'm self-satisfied.
If you are going to install Smartphone Holder or USB power supply, I think this is necessary parts.
View detail
I'm using it for a different purpose.
I installed the Handlebar for the purpose of using it as an auxiliary bar for the water temperature gauge amplifiers and the Drarecorder Switch.
(So Handlebar is also a weak Material that needs this bar):(It's still OEM, not Aluminum)
We are satisfied with the Accent in terms of Design.
It is also available in a variety of lengths, and the mounting flange is sold separately in a variety of colors.
View detail