Reviews
Fits: KAWASAKI 750Turbo, KAWASAKI 750Turbo, KAWASAKI ER-4n, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI GPz1100, KAWASAKI GPz1100, KAWASAKI GPz1100, KAWASAKI GPz400, KAWASAKI GPz400F, KAWASAKI GPz400F, KAWASAKI GPz400F, KAWASAKI GPZ400FII, KAWASAKI GPZ400FII, KAWASAKI GPZ400FII, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja1000, KAWASAKI Ninja1000SX
Black so it looks tighter.
What made you decide to buy?
Since the beginning of the New Year 2024, I have been gradually collecting parts and trying to carry out a customization that I have been envisioning since last year … that customization is to replace the front rear sprocket and chain. Why did I choose the Sunstar Racing Steel rear sprocket? The reason for choosing the Sunstar racing steel rear sprocket and chain is that the power and traction control of modern supersports are constantly subjecting the sprocket and chain to high and fluctuating loads. Although there is no change in weight with the stock steel and Sunstar also made of steel, we chose a rear sprocket that delivers super durability that can take the power.
[How was the installation?
When replacing the sprocket, you will need a racing stand to lift the rear tire and a long spinner handle to loosen the axle nut. Also, a Torque wrench is necessary for Torque management.
Float the tire on the rear stand, loosen the axle nut, pull out the shaft, and remove the wheel. I always use a scrap tire from a car to put the removed wheel on the stand. I always use a scrap tire from a car to put the wheel on the stand.
While removing the Rear Sprocket, it is a good idea to clean up the area around the back of the Sprocket that has become sticky with the Chain lube. After cleaning, fix the Rear Sprocket, but since there is a little play, fix the Sprocket nut while pulling the Chain in the direction where the Chain is pulled. It is recommended to mark the Sprocket nut to confirm the tightness.
How was your experience with it?
At first, I was not sure if I should reduce the number of pins and make it Long, but I didn't want to have a misprint on the Speed display, and I also liked the ride quality of the OEM, so I decided to use the same 43 pins. So there is no change between before and after the replacement, but the OEM 6R is easier to handle. 21 year old ZX-6R has Front 15T, Rear 43 Dings, Reduction Ratio 2.866, Chain linkage 112.
View detail
DRCRear sprocketBolt nut
Bolt nut for the new Rear sprocket.
It is a dedicated product and fits well.
Since it is a component that can easily come off, inspection before driving is a Large cut.
View detail
![[KAISOKU] Outerwear Clutch](https://img.webike-cdn.net/catalogue/images/86178/02152103_602a630a6f189_TS.jpg)
Fits: YAMAHA BW'S100, YAMAHA JOG, YAMAHA JOG-Z, YAMAHA GRAND AXIS 100, YAMAHA JOG50, YAMAHA JOG-EX, YAMAHA AXIS90, YAMAHA AXIS90 Profoot, YAMAHA AXIS Pro Foot, YAMAHA JOG90, YAMAHA Super JOGZ, YAMAHA AXIS90, YAMAHA AXIS90 Pro Foot, YAMAHA AXISPro Foot, YAMAHA JOG90, YAMAHA SUPER JOG
The weight of the description does not Ate.
OEM 3-type for horizontal JOG (480g) I bought it for the weight Up rather than the
The description gives a weight of 515g, but the actual measurement is only 496g.
OEMs usually increase or decrease by about 5g because of balance shaving, etc,
I could not think of writing an imprementation that I would recommend to others if the Cut-out Outer had an error of almost 20g!
[Regarding installation].
50cc horizontal JOG (3KJ/5AUCase before regulation, 5BM/5SUCase after regulation)
Case cover Gasket is required.
However, the shaft part is thicker than OEM, so when you stop the Nut, insert the O-ring, and try to close the Cover.
The gap with Bearing on the Cover will be insufficient.
So we need to take measures such as thinning the O-ring
・3WF
There's plenty of room to spare. o-ring should be as thin as the 50 story?
You can replace the Nut that stops the Outer with a thin Nut for 50cc
View detail
Fits: HONDA 250T, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX250, YAMAHA SRV250, YAMAHA SR250, YAMAHA RZ350, YAMAHA RZ250R, YAMAHA R1-Z, YAMAHA MT-03 (-2009), YAMAHA FZ400R, YAMAHA DT250, YAMAHA FZ400, YAMAHA DT200WR, YAMAHA DT200R, YAMAHA BW200, YAMAHA BW200, SUZUKI MARAUDER250 (GZ250), SUZUKI VOLTY, SUZUKI BANDIT250
Smooth running
I bought this for my YZF-R25 and brought it in to Motorcycle shop to have it replaced. I had used it before, so regular maintenance will extend its durability. The ride feels smooth. The color is a nice, calm gold, and I think it's a good color. View detail
![VX Series Chain 520VX3 Gold [with Caulk (ZJ) Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_G&G_P.jpg)
Fits: KAWASAKI KLX650SR, HONDA FTR250, HONDA CRM125, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI KLX230, KAWASAKI KDX250SR, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI DR200, YAMAHA XJ6NA, YAMAHA SRX400, YAMAHA MT-03, YAMAHA MT-25, DUCATI MONSTER400 ie DARK, DUCATI MONSTER400 ie, DUCATI MONSTER400 DARK, DUCATI MONSTER400
D.I.D 520VX3
The product is 100% original, although delivery took more than I should've opt for FedEx. Cant wait to install it on my bike! View detail
Fits: KAWASAKI Ninja ZX-6R (ZX636), YAMAHA YZF-R3, YAMAHA XJ6NA, YAMAHA SRX400, YAMAHA MT-03, MEGELLI Megelli 250R, KTM RC390, KTM 600 LC4, KTM 600 INCAS, KTM 600 GS 4T, KTM 600 ER, KTM 390 DUKE, BMW G310 R, BMW G310 GS, BMW G310 GS, MV AGUSTA F4-BRUTALE 675, APRILIA WIND, APRILIA PEGASO, DUCATI SCRAMBLER, DUCATI SCRAMBLER
Genuine DID replacement chain link
As I said before, I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERV7 is one I do not surrently have in stock so no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. These chains are generally used on tracxk bikes from a 530 or 525 conversion so I do use a lot of them. As you can imagine, I go through a lot. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Fits: DUCATI 350 INDIANA 87, DUCATI 350 SS 92-93, DUCATI Scrambler 16, DUCATI Scrambler 16, KAWASAKI GPZ500, KAWASAKI Ninja500 07, KTM 390DUKE, KTM 600 ER 85, KTM 600 GS 4T 85-92, KTM 600 INCAS 89, KTM 600 LC4 93, APRILIA PEGASO600, APRILIA WIND (i.e. the World Wide Web), DUCATI 400SS, DUCATI 400SS, DUCATI 600SS, DUCATI 600SS, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER600
Used for Ninja250SLCircuitSpec.
I used it on my Ninja 250SL with CircuitSpec. It is definitely better than the OEM Chain that was originally installed.
Since it is a RACINGChain, its durability is not as good as it is now. It is a RACINGChain, so its durability is not so good at present.
View detail
Fits: HONDA CB 750 K FOUR , HONDA CB 750 F SUPER SPORT
Listed for 530 Chain, but it was for 630 Chain.
I have accepted the return of a part that was incorrectly labeled by your company as unusable, but I still haven't even received a call from you! View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI GPZ1000RX, KAWASAKI ZRX1100, KAWASAKI Zephyr 1100, KAWASAKI GPZ1000RX, KAWASAKI ZRX1100
OEM alternative.
I have been abusing my car, Clutch, which is 90% safe driving lessons and 10% touring, so it finally slipped. That is why I had no choice. I purchased this one and replaced it.
GPZ900R, but the engine has been replaced by GPZ1000RX, so please be careful when purchasing parts. disc, plate, and spring are one more than 900, and everything is in one pack except Gasket and Oil, so it is easy to change to Large kit. The kit is easy to use and convenient.
The disc corks are painted blue, but the OEM disc has a slit at an angle, but this is a very common type. The cork of the disc has a diagonal slit on the OEM disc, but this disc has a very common type of slit. Before assembly, it was necessary to soak the disc and plate in oil. When assembling the spring, the push rod is pushed, so you must push the center as hard as you can before assembling the spring. If you don't do this, I think you will break Housing.
After the replacement, the clutch lever felt heavier than the Large lever.
We had been using ZX-14 Release and MASTER to reduce the weight of the clutch lever, but after replacing it with this clutch kit, the weight became about the same as that of a NORMAL GPZ900R. Meet point is a little far? I wonder if it was like this.... It is like this.
As for the performance, let me just say Good!"
The clutch was slipping and I had no choice but to replace it with this kit instead of the OEM one. Hopefully, it will last longer than the OEM.
View detail
Fits: SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI STREET MAGICII (STREET MAGIC II), SUZUKI STREET MAGICII (STREET MAGIC II), SUZUKI LetsII (LETS Two)
ZZ
[How is it used?
Town ride
How was your experience with it?
It has become quite Smooth!
How did it compare to other products?
I think it's cheap and good.
View detail
![VXSeriesChain 530VX3 Gold [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/73326/0517_530VX3_G&G_P_togo_TS.jpg)
Fits: HONDA CB1100, HONDA CB1100, HONDA CB1100 type II, HONDA CB1100EX, HONDA CB1100RS, HONDA CRF1100L(Africa Twin), HONDA CB1000R, HONDA CB1100B, HONDA CB1100C, HONDA CB1100D, HONDA CB1100F, HONDA CB1100R, HONDA CB250N, HONDA CB250T, HONDA CB350 Four, HONDA CB400 Four, HONDA CB400AT (HOWK II), HONDA CB400D (SUPER HOWK III), HONDA CB400LC, HONDA CB400N (HOWK III)
as expected (as opposed to expected)
Drive and Driven Sprocket were replaced at the same time. View detail
Fits: HONDA CB1100, HONDA CB1300SUPER BOLDOR, HONDA CB1100, HONDA CB1300SUPERTouring, HONDA CB1300SUPERTouring, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CBF1000F, HONDA CBF1000F, HONDA CBF1000F, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600F, HONDA CBR900RRFire blade, HONDA VTR1000FVTR1000F FIRESTORM, HONDA X11, HONDA X11, HONDA HORNET900
It was a darker Bronze color than the picture.
I fell 200 times rolling over on 2 Ding Down.
I thought it was Gold in the picture, but it was actually a Bronze color.
View detail
Fits: YAMAHA CYGNUS, YAMAHA CYGNUS, YAMAHA Majesty 150 Europe, YAMAHA Majesty 125, YAMAHA Majesty 125, YAMAHA Majesty 125, YAMAHA Vino 125, YAMAHA BWS125 (Bewith), YAMAHA Cygnus X, YAMAHA Cygnus Si, YAMAHA Cygnus D, YAMAHA Axis Street, YAMAHA Maxstar 150, YAMAHA Maxstar 125, YAMAHA Teos 150, YAMAHA SV MAX125, YAMAHA BWS125 (Bewith), YAMAHA GTR125, YAMAHA Majesty 150 Europe, YAMAHA Theos 125
cheap
[How is it used?
Town ride
How was your experience with it?
Cheap but great quality!
How did it compare to other products?
Fairly close to OEM
View detail
![Yamaha Scooter 125cc [KAISOKU] Clutch](https://img.webike-cdn.net/catalogue/14762/10170122_507d89ac7d9d9_TS.jpg)
Fits: YAMAHA Cygnus X, YAMAHA MAJESTY125, YAMAHA CYGNUS X, YAMAHA Axis Treat, YAMAHA BWS125(BWS), YAMAHA Majesty 125, YAMAHA Axis Street, YAMAHA BWS125 (Bewith), YAMAHA Majesty 125, YAMAHA Axis Street, YAMAHA BWS125 (Bewith)
finally
I finally got my hands on Clutch, and I'm happy to say that it worked as well as I wanted it to! I'll have to look into buying the next part again! View detail
![High Speed Pulley Kit [KAISOKU]](https://img.webike-cdn.net/catalogue/images/31791/10170124_507d8a4ad8b26_TS.jpg)
Fits: YAMAHA Cygnus X Type 1, YAMAHA Cygnus X Type 1, YAMAHA Cygnus X Type 2, YAMAHA Cygnus X Type 2, YAMAHA Cygnus X Type 3, YAMAHA Cygnus X Type 3, YAMAHA Cygnus X Model 4, YAMAHA Cygnus X Model 4, YAMAHA Cygnus X Model 5, YAMAHA Cygnus X Model 5, YAMAHA BWS 125 Type 2, YAMAHA BWS R, YAMAHA BWS X 1 type, YAMAHA BWS125 Type 1, YAMAHA MAJESTY125, YAMAHA BWS125 Type 1, YAMAHA Axis Treat, YAMAHA CYGNUS X Type 1, YAMAHA CYGNUS X Type 2, YAMAHA CYGNUS X Type 2
KAISOKU
So many parts are in Quantity:I was very happy to be able to purchase a set! It is a well-known manufacturer and I was able to experience the results, so I have nothing to say about it. It would be helpful if you could describe in more detail the car models to which the product is applicable. View detail
Fits: HONDA 250T, APRILIA RS250 (Aprilia), APRILIA RXV450, APRILIA RXV550, APRILIA SXV450, APRILIA SXV550, BMW F650GS Dakar, BMW F650GS Dakar, BMW F650GS Dakar, BMW F650GS Dakar, BMW F650, BMW G650 XCHALLENGE, BMW G650 XCOUNTRY, BMW G650 XMOTO, DUCATI 600SS, DUCATI 748, DUCATI 748, DUCATI 748, DUCATI 750 Santa Monica (88), DUCATI 750 Montjuich (87)
Replaced
When I bought a used Motorcycle, the Chain had rust in some places and needed to be replaced, so I considered whether to use the Gold color or not and decided to use this color and Spec. My Motorcycle is a 108LINK, so I bought a 110LINK and cut it to 108LINK and installed it because it is +4000 yen more expensive than the 110LINK when purchased from webike. View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03, KAWASAKI ZZR250, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400χ, KAWASAKI Z250, KAWASAKI Z250SL, KAWASAKI VERSYS-X 250, KAWASAKI Ninja250SL, KAWASAKI Ninja250, KAWASAKI GPZ400S, KAWASAKI GPZ250R, KAWASAKI GPZ400R, KAWASAKI GPX400R, KAWASAKI GPX250R, KAWASAKI FX400R, KAWASAKI GPX250R II, KAWASAKI ELIMINATOR250V
When in doubt, SUNSTAR
Balance of lightness and durability, true circle, etc.
In terms of color variations and price, the xam is the better choice.
For now, you can't go wrong with SUNSTAR.
View detail
I should have bought it earlier.
Clutch control is very easy, and above all, the in-gear kick is almost a one-shot instruction!
I would definitely recommend anyone doing HED with 250X!
View detail
having an instant effect
Product Name
Kobo Kitamura Kobo Float Tamura Kobo Kitamura SPClutch lifter plate
Item Number
KITA-H31-03
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
Half an hour
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
I chose this one so that I could improve the cutting of the clutch. I had tried changing it in my previous purchase and felt the effect, so I decided to purchase it.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
The difficulty may be reasonable because it opens Engine.
How was your experience with it?
Front up, etc. is now really easy.
[Included Parts:were they on?
Seal, Instruction Manual, etc. were included.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
![STD Series Chain 420D Steel [with Clip (RJ) Joint]](https://img.webike-cdn.net/catalogue/10626/420d_TS.jpg)
Fits: HONDA MONKEY 125, HONDA NSF100, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO, YAMAHA YZ65, KAWASAKI KLX110L, KAWASAKI Z125 PRO, HONDA APE100, HONDA APE100 TypeD, HONDA ATC70, HONDA BENLY90S, HONDA C50 SUPER CUB 50 Custom, HONDA C50 SUPER CUB 50 Standard, HONDA C50 SUPER CUB 50 DELUXE, HONDA C50 SUPER CUB 50 BUSINESS, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50L LITTLE CUB, HONDA C50LM LITTLE CUB
Purchased again for Swing Arm extension.
I have never used another manufacturer's so I can't compare it to theirs, but the previous one had no problems even after 5,000 km in about 6 months. View detail