Reviews
Compromise and purchase
To prevent dirt around the exhaust pipe and puncture of the rear wheel
I would like to extend the Rear of the Front Fender,
While there are only a few compatible parts for 400X,
We finally decided on this product.
Ideally, the product would be sold as a whole Fender, or it would be able to be inserted into an existing Bolt fixed to a Fender.
Before purchasing this item,
We have found a product made by Large land of Bolt On.
Naturally, I was worried.
I inquired about the possibility of installing it, giving the year and model,
The immediate response was that it could be installed,
I bought this one immediately in response to my feelings,
Size did not match at all (laughter).
I will return the product and I will be able to use this product as a Large.
I have purchased the product.
As for the installation, first of all, why did it take so many different shapes?
He said he would probably use double-sided adhesive Seat.
I was wondering for a while if there might be a reason for this,
My 6 year old son was nearby during the installation process,
While making the sticky Seat resemble the face of Pokemon's Character, we flopped it together and pasted it onto the Fender in a harmonious manner.
Plastic screws were included in the package for drilling holes in the Fender and attaching it to an existing Fender,
The thickness of the seal was such that it would not be possible to reach the reverse side using the same screws, so for the time being, only an adhesive seal was used.
Although I am concerned about the adhesive strength, I have used it about 250km round trip including high speed touring×4 times, and so far there has been no dropout, wobble or cracking, but I will do the Screw hitting treatment soon.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 1200S, DUCATI Monster 1200R, DUCATI Supersport, DUCATI Supersport S, DUCATI Supersport 950, DUCATI Supersport 950S
If you value functionality
There are stones and mud to the back.
I was just trying to think of something better.
I found it and bought it.
It costs 11,000 yen, but it is very cheap.
If it is not imported FOR VEHICLE, then about $2,800 is a reasonable texture.
The installation does not make Parenthesis better, though,
For function-oriented and discrete use, ….
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
Let's put it on carefully.
I couldn't imagine a situation where I would get hurt by a meter, so I wondered if it would make sense,
I bought it just in case I had to use Gloves when I got a little dirty or something.
Quantity:2 Set (Super clear and Antiglare) I had a Super Clear, but I thought Antiglare would make it difficult to see the meter, so I put Super Clear on it.
Super clear really looks like just Film; Large is probably sturdy since the manufacturer says it is very abrasion resistant.
It left a few air bubbles, but the Manufacturer The film is excellent in that if there are some air bubbles, they disappear naturally within a few hours to two days. It facilitates a satisfactory installation." I believed it would disappear, but it did not.
Paste carefully.
View detail
Fits: HONDA CB1100RS, HONDA CB1100EX
It's hard to say...
The size is also a little small. The CB1100 meter is difficult to position because the part to apply the meter is deep....
View detail
Fit but not cosmetic.
It is for Tiger sport 660, so the size feeling is Exactly.
I don't use the plasticrivet that comes with the product because I am somewhat concerned about the protrusion of the plasticrivet on the inside.
I have only used the supplied double-sided tape for fastening, but if the tape is degreased and treated with a fire retardant before bonding, I think there will be no problem in my experience.
However, it is not guaranteed when a strong force is applied to it by any chance.
I have not yet run in the rain or on unpaved roads, so I have not tested it yet, but I bought it because I thought it might be useful for Triumph's recent bodies, which seem to have a lot of mud splatter due to their short mud guards.
However, it is too expensive for what it is, which is a drawback.
View detail
Fit but not cosmetic.
Same imprementation as for Front.
It is for Tiger sport 660, so the size feeling is Exactly.
I don't use the plasticrivet that comes with the product because I am somewhat concerned about the protrusion of the plasticrivet on the inside.
I have only used the supplied double-sided tape for fastening, but if the tape is degreased and treated with a fire retardant before bonding, I think there will be no problem in my experience.
However, it is not guaranteed when a strong force is applied to it by any chance.
I have not yet run in the rain or on unpaved roads, so I have not tested it yet, but I bought it because I thought it might be useful for Triumph's recent bodies, which seem to have a lot of mud splatter due to their short mud guards.
However, it is too expensive for what it is, which is a drawback.
View detail
Fits: SUZUKI V-Strom 1050, SUZUKI V-Strom 1050 XT, SUZUKI V-Strom1000
Reduced mud splashing on Engine.
I think the mud splatter from the direct hit to the Engine is gone, and I am satisfied with its function as a Mudguard. The texture of the product is not so good. I thought about painting it, but I had some Carbon Seat left over, so I put it on. The double-sided tape is just to reduce rattling and has no adhesive power. View detail
Fits: TRIUMPH Street Triple 675, TRIUMPH Daytona 675
I'm satisfied.
I was able to install it. How does it feel on a rainy day?
Also, to be honest, I didn't want to drill the holes with Drill, so I stuck it on at first with the adhesive tape that came with it, but still. Do you like the design or something?
View detail
Fits: BMW F750GS, BMW F850GS, BMW F850GS Adventure
Attached reinforcement parts are required!
It cracks easily if you don't use the included reinforcement parts, even though it costs 30,000 yen. View detail
Fits: HONDA CB1000R
Easy for everyone, not for everyone.
I'd probably buy this 3-Quantity.:4 Set
because Somehow I'm not satisfied with the finished product." From
What I mean is that, first of all, the design phase Film shape/effect after installation." The accuracy of the product as a "product" is satisfactory, but the manufacturing process Accuracy and quality as a final product." not very good
The manufacturing method is probably to stamp out the Seat with a die, but the fine BALI is left in a few places on the edges, so no matter how much you apply it to Beauty, those few places will float…MeterFilm is not a very strong product, so it is not strong enough to stick, so it will float a little bit. It's a little bit of floating, but it bothers me a lot, and once it floats, there's nothing I can do to hold it back.
As a solution, you can cut the straight edge of the Film by 0.1mm before applying it. (I had to buy several times for this reason, resulting in a huge surplus of Antiglare).
So (Okay, okay, you put it up well.) I was gently wiping the corners of the bag, and it caught a corner and floated away, and then I got a fine dust in it and said, …... "… You really are a …" something like that
Image of the product. Pi Turn!" But you should not expect perfection!
Of course, if the compromise point were lowered to the extreme, Large would be sturdy, but since it's always in sight, that's not going to happen in the end. (It's my fault.)
Maybe the finished product would be better if I made it myself using Free cut for PC….
View detail
Fits: YAMAHA Tracer 9 GT, YAMAHA MT-09 SP, YAMAHA Tracer 9, YAMAHA MT-09, YAMAHA XSR900
That's all right.
I put it on and used it in the rain and there doesn't seem to be much difference between with and without it…. View detail
Exhaust System & Radiator guard substitute
Since it is almost a universal product, it doesn't fit to the car body exactly and there is a little extra width, so it is not a perfect fit and the color is different, so you may feel like you are wearing it, but it is not that noticeable, so I think it is bearable. I used double-sided tape with cushioning or pin to fix it, so this time I used double-sided tape and gory-fat tape that I bought separately to fix it on the inner surface.:Pair (for Left and Right) I think it is difficult to make it symmetrical, and I managed to fix it in a compromising position after struggling for more than 20 minutes. View detail
Fits: HONDA NC750X
Dimensions are correct, but air bubbles remain on the edges.
Pasting was easy. The dimensions were correct and I was able to apply it without any large gaps. However, although it is inevitable due to the quality of the product, there were some air bubbles at the edges of the film. It is like pasting a cheap smartphone film. This is something that cannot be helped, so I will use it without worrying. View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
Are all Manufacturers similar?
How was your experience with it?
It is no different than screen protection for cell phones.
It is not GlassFilm, just Film.
Contents include Super clear×1, Antiglare×1
Super clear was used this time.
On White's Table [Color] I'm putting Clear and Glare, although it's hard to see in the light.
The glare looks more Cream colored.
The purpose was to prevent scratches on the screen, so we didn't really want anything more than that.
I think it depends on the shape of the Motorcycle, but on my Motorcycle it was very difficult to stick.
It can be re-stretched many times, but the adhesion will inevitably weaken.
Thickness is very thin.
I guess it depends on the shape of the meter, but there were many areas that could not be covered because there was quite a distance to the edge.
Also, it is difficult to paste this again due to the split type.
I understand that it is hard to keep the price low because it is a Motorcycle product and it is not easy to produce a large number of them.
Still, this Gold amount seems high for this content.
However, the initial objective of not using scratches has been achieved.
This is the kind of thing, I think it is for people who just need to be prevented from scratching.
How did it compare to other products?
No comparison because we have not purchased any other company's products.
However, it seems that all products are the same and there is not that much difference in Large.
It may be a good idea to buy a cheap Large land-based product before you ruin it.
[Points to note]
Be careful about re-stitching. It is not impossible, but the edges will inevitably become worse.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
I'd like to see them lower the price and at least consider replacing it as a consumable item.
I want GlassFilm to be the same as the cell phone, easy to apply.
View detail
Fits: ROYAL ENFIELD Himalayan
I can't get rid of wrinkles.
The installation was carried out in accordance with the Instruction Manual.
Wrinkle could not be removed.
I thought it would go away with time.
I left it alone, but some of it remained.
Also, when you peel off the adhesive Cover.
It didn't peel off easily.
View detail
Fits: YAMAHA Tracer 9, YAMAHA Tracer 9 GT, YAMAHA XSR900
It's effective, but...
The Rear Fender on the 2022 XSR900 is too Short.
Dirt, as well as bounced-up Small stones, etc., will hit the Suspension.
After driving, stones and sand accumulated around the Swing Arm and Suspension.
This product will improve the situation considerably.
Rear tire must be removed for installation.
It is a Large strange task in its own way.
And the price is too high.
I can't help but wonder if this is more than $10,000.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
Care must be taken when attaching the protective film to the Signal screen on both SIDES.
There is also a pasting Instruction Manual, and the product is relatively meticulous.
The paste itself can be applied with a feeling similar to that of a protective film on a cell phone.
The process itself is simple.
However, the Instruction Manual for the product stated This product is about 2-3mm smaller than the screen size. and take the wording at face value will fail.
Particular attention should be paid to the long, narrow sections on both SIDE.
If the film is applied in advance and placed 2-3mm away from the edge as described in the Instruction Manual, the protective film on the main screen side will float because the space between the two SIDE screens and the main screen is like a slope.
It seems better to stick both SIDEs just a little bit away from the edge.
If you pay attention to the above notes when pasting, I think it will clear up nicely.
View detail
Fits: YAMAHA YFZ-R7
It's normal
It is different from the ones sold on Amazon. So the size is exactly Large and sturdy.
If this were a glass or something like that, it might have received a better evaluation, but it is just a transparent resin film.
Why am I worried about durability (weather resistance)?:1 Set of 2pc.
Well, considering the risk of accidents, resin is probably appropriate.
It is easy to work with, and unless the area is very dusty or dirty, I think it will stick beautifully.
As the previous poster said, it still seems overpriced.
View detail
Fits: SUZUKI V-Strom 650, SUZUKI V-Strom 1000
Two types of Seat
It contains two types of Super clear and Antiglare.
Antiglare was Meter difficult to read Level, so I stopped.
I don't think it fits AnalogMeter.
It is cut to a small size to prevent floating.
The smallest Seat was difficult to position due to the large size of the limit, and it floated a little.
It is good because the work can be done reliably with the included items.
View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125
Meter panel protection
Seat is Ultra [Color] It came in two types, Clear and Antiglare. The one we stuck on was Ultra [Color] Clear. A working Tool and Instruction Manual were included. It is easy to install. This will prevent Small scratches on the panel surface. View detail