Reviews
In OEMHelmet holder
I have not been able to install it yet because the weather has been rainy on my vacation since I purchased it, but as far as I have checked Reviewetc., I think it is a highly satisfactory product.
Since the OEMHolder cannot reach the Helmet's Holder...
View detail
Fits: BMW R1200R, BMW R1200RS, BMW R1250R, BMW R1250RS, BMW S1000RR
It's perfect
We had a Dealer install it on a BMW R1250R in 2023!
The labor cost was 1,650 yen.
Very useful.
View detail
It is easy to install.。
You only need one Hexagonal Wrench to install it, just apply Screw lock and tighten it. I always buy helmet locks from this manufacturer because they are inexpensive and the quality is very good. View detail
Postscript to postscript!
You probably think that a helmet is something that someone else is using in direct contact with your skin, and that there is no reason for someone to steal such a thing. The idea of a thief is that he/she wants a helmet for a Tandem person. So don't think that because the helmet is large, it is durable or that the probability of it being stolen is low. View detail
Postscript.
In my opinion, the screws of this Helmet lock are Large, which is an oddly soft material. In my opinion, the screws that fasten the Helmet lock are Large and are made of an oddly soft material! Therefore, it is safer to work with caution and take it easy or Shop.
Helmet locks themselves may be inexpensive, but helmets are expensive, and if they are stolen, you will not be able to get back on your motorcycle.
View detail
I was relieved that it was as good as I imagined.
The vehicle used is z900RS.
Due to the convenience of installing the Side Back on the opposite side of the Exhaust System. The existing helmet holder could not be used.
Then, I thought of for Tandem, Helmet holder.
It can be installed on the opposite side of the existing helmet holder.
This product has arrived. It looks the same in appearance as the existing OEM product.
I wondered if the existing helmet holder could be attached to the bracket as it is, and it did so without any discomfort.
In other words, the Helmet holder that can be used with the Engine key arrived on the opposite side of the existing one.
View detail
Ease of use unique to Exclusive Design
[How is it used?
RC42 has a Helmet holder if you don't remove the Seat.
It was inconvenient when I was on the road because I could not use it. I was looking for a product that was easy to use, and I found this product and purchased it with high expectations for its exclusive design.
Was the one you received as per Image?
Almost as per the Image.
Was the installation difficult?
Installation was very easy!
The only tools used are +Driver and 5mm and 6mm Hexagonal Wrench.
How was your experience with it?
Balance varies slightly depending on the type of helmet.
It is a Level that is not a problem.
[Included Parts:were they on?
The key is Quantity:Includes 2pcs. Includes a helpful Instruction Manual.
[Was there anything that disappointed you?
None in particular.
View detail
Fits: BMW R1200GS, BMW R1200GSAdventure, BMW R1250GS, BMW R1250GSAdventure
No need to worry about food while touring.
I used to hang my helmet on Mirror when I took a break during touring. I was worried that it might be stolen or fall off, but now I feel safe! However, I am worried about rust because the material is steel. It is easy to install and just fits. View detail
Helmet is now easier to lock.
I was having a hard time using the helmet holder that I moved when I replaced the rear suspension made by Y's Gear, and when I locked the helmet, it was close to the engine, so I had to be careful about the mounting angle, etc. I saw this product on SNS and thought it looked good, so I bought it.
Tandem Footpeg and Bracket are attached by co-tightening, but our car is equipped with SSB GymkhanaBumper and Quantity:Since the Slider in the set is attached in place of the Tandem Footpeg, the Spacer included in the product was not used.
I was able to install it without hitting the frame.
The OEM lock part was available as is, so the part used in this product was Bracket Only, but I am still satisfied with the ease of locking.
View detail
Fits: HONDA ADV150, HONDA glom, KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, YAMAHA MAJESTYS, YAMAHA BWS(BWS), YAMAHA BWS125(BWS), KAWASAKI Z125 (16), HONDA ZOOMERX, HONDA DAX125
Without removing the Seat.
I like that it can be attached to Handlebar.
No need to remove Seat.
View detail
Fits: HONDA PCX eHEV, HONDA PCX125, HONDA PCX150, HONDA PCX160, HONDA GROM
I think it is convenient.
Quality and texture information is well finished in chrome The helmet lock has become easier to use for the feeling of use Product to buy together Product # P00040 makes it easy to fix your helmet It's difficult to install Cost performance and comparison with other products, but with high completeness About Shipping and Packaging The concern when purchasing is that collecting and purchasing information first can save time and money to see if it is possible to install I bought this product because I couldn't use the std helmet lock of Monkey 125, but I'm satisfied View detail
Very easy to use
I was looking for something that I could use for my vehicle, which had fallen out of the lineup. I was looking for something that I could use for my vehicle, and although some modification is required, I was able to install it without any discomfort. I recommend it. View detail
Wow
Super super fast delivery. This the 3rd or 4th I have ordered (I have owned several Zx14r's and they make good gifts). They fit perfect in the slot. Factory look. First I take the lock to a local locksmith to have him match the key to the ignition key, 10 min and 10 dollars. Bradley needed item on the otherwise perfect bike. View detail
As if OEM Parts
[How is it used?
Is it normal for Austrians to carry a Helmet when they get off their Motorcycle? Or is it the result of a thorough pursuit of weight reduction? The answer is a mystery, but as a Japanese, it is inconvenient for me because KTM motorcycles are not equipped with a helmet holder as a standard equipment. That's where our KIJIMA-made helmet holder comes in!
Was the one you received as per Image?
Bracket that looks like it could be made by yourself and Quantity of Universal Helmet HolderBody:It is a Set product. But if you make it yourself, it is troublesome, so it is faster to buy it. (Lol)
Was the installation difficult?
The OEMBolt is tightened so firmly that it is difficult to remove the Tandem FootpegBracket. After successfully removing the bracket, apply Screw lock fluid to the Bolt supplied with the product, and tighten the Bolt in accordance with the Instruction Manual to complete the installation.
How was your experience with it?
Convenience is the only word that comes to mind.
[Included Parts:were they on?
A special Bolt and Spacer are included. And KIJIMASticker as a bonus.
[Was there anything that disappointed you?
In case of installing Shoei's Z7Helmet, when hooking the D Ring to the locking part, it is a little troublesome because it has to be operated in a small space.
Other items that would be helpful
Availability and clarity of Instruction Manual:The work procedures are easy to understand because they are explained step by step with drawings with pictures.
Items to buy together:Screw lock liquid
View detail
perfectly (suited)
It can be attached by simply removing two bolts from the bracket of the Tandem Footpeg.
I'm sure that can be stolen for that, but the same thing goes for the locks on the OEM on the other side.
We have converted it to one-key (can be opened and closed with Motorcycle key) by referring to other sites.
View detail
Use of Helmet lockAssist is recommended.
Remove the Tandem Footpeg Bracket once and install it between the body Frame and Bracket.
Other manufacturers seem to have the same mounting position, but the one made by KIJIMA fits inside the bracket, giving the impression of being Refreshing.
On the other hand, attaching and detaching the helmet is somewhat troublesome, and if you are not used to it, you may tend to hit the vehicle body or rider's tepe, so we recommend the use of the Helmet lockAssist made by the company.
In addition, I am concerned that the position of the Center Stand legs just touches the interior material of the Helmet….
We recommend this product to those who can find merit in its good fit, etc., after comparing it with other products that are attached to the mirror section or handlebar.
View detail
Somewhat difficult to use...
Used on a ZX10R '24.
The box said it was for 16-17 year models, but the compatibility is perfect.
No problems at all.
The ZX-10R does not have a helmet lock, so I have to attach it myself,
The two choices are Largebody Babyface or KIJIMA.
This one is like a lock coming between the Tandem Footpeg Bar, so to be frank, it is difficult to hang a Helmet.
It may be even more difficult to install because people who ride ZX10R are almost full face.
If you get used to it, it is no problem, but if you install it roughly, the motorcycle and helmet will rub against each other,
Be careful when locking, even if it is troublesome.
View detail
Fits: KAWASAKI Z125 Pro, KAWASAKI Z125 (16), KAWASAKI Z125 (16)
KIJIMA Helmet lock installed on Z125pro
[How is it used?
Fitted to Street and TouringMotorcycle
Was the one you received as per Image?
Yes.
Was the installation difficult?
It was not difficult.
How was your experience with it?
This Motorcycle has a jOEMHelmet holder under the chair, but it is difficult to use. This makes it easier. even though it is an Other Brand Product, the quality is good enough.
[Included Parts:were they on?
Key is Quantity:1 Set of 2pcs. with KIJIMA's Smallest Sticker (I think).
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Instruction Manual is included. There is no problem if you follow the instructions. The bolt to be attached to the car body was purchased separately to prevent tampering. The available bolt standard is a little longer than the supplied one, so I added thickness to the body with a washer I had on hand.
View detail
It's still convenient.
I bought it because the OEM helmet lock is difficult to use because you have to remove the Seat every time you use it. It is still very convenient.
In the past, motorcycles usually came with this type of key from the beginning, but recently the number has been decreasing. I really hope that OEMs will install this type of key, as it will increase the number of keys.
View detail
Fits: BMW R1200R, BMW R1200RS, BMW R1250R, BMW R1250RS, BMW S1000RR
Helmet holder can be attached to SS
[How is it used?
Used for storage of Helmet
Was the one you received as per Image?
It was identical to the photo shown on the website.
Was the installation difficult?
Simply remove the Rear Footpeg and reinstall it across the Bracket.
Very easy.
Be careful with tools because the bolt is a torx bolt.
When installing the key on the bracket, be sure to follow the instructions for attaching the Screw Lock to the Screw.
How was your experience with it?
The Holder makes me feel very safe when I leave the Motorcycle.
Since the helmet comes exactly at the rear footpeg, care must be taken not to scratch the helmet.
It was available for the 2023 MODEL.
I had a hard time with Speedra's Helmet lock, but the mounting points will be in the same place.
However, KIJIMA's product has an extended bracket and can escape from footpeg, so this is adopted.
Speedra was forsaken for installation in the same location as the footpeg section.
Babyface was also considered, but the key part is shaped like Straight when it is opened,
I thought about the possibility of Helmet falling off, so I stopped.
KIJIMA and Speedra are expected to prevent falling due to their U-shape.
The frame is black and the bracket is also black, so they are the same color and inconspicuous.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail