Reviews
Well, it's something I wish I had.
I bought it for cleaning the chain on my off-road motorcycle.
To be honest, the rubber on the receiving end of it is easy to tear off and the price is right.
Since it is a Universal Product, where is Quantity:Set the rear tire to float or
It's quite inconvenient.
This would be a roller stand or a regular hydraulic jack.
You might as well buy it.
View detail
We have more of the same.
https://www.webike.net/sd/21643988/
As a matter of fact, the thing is the same as this one, only the sticker of UNIT is said to be pasted on.
The price is also about half the price, so I recommend this one if you are considering buying it and are not particularly particular about the brand.
View detail
Is good
Inexpensive but easy to use; if you want to torque-manage Stem, use the torque wrench Quantity in 90-degrees for:You don't have to do complicated torque conversions because you can set it View detail
Easy to use
When I was parked with my motorcycle cover on, the strong wind blew the side stand's I bought it to prevent it from falling over on the other side
It's simple, but enough to hold it in place
Of course, the main purpose of this system is to lift the rear wheels a little bit for easy chain maintenance It is now
View detail
Very good I'm glad I bought it
I tried to use it
It's a motorcycle with only Side Stand
Now I could lift the rear tire with ease
It's like they've thought about the shape of the body of the car
I had no worries
The same was true for the front tire
If you hang this in the right place
It's a strong ally
View detail
Used to organize the Transporter
I wanted to create a fixed position for the Helmet in the Transporter, so I bought it
I have a board on the High ace Rear window and I fixed it to it
I've only driven about 100km since I put it on, but it doesn't fall off while driving and holds up well They do
I fixed it near the rear so I can hang the Helmet during the practice break
View detail
For mounting the phone.
I bought this product to install a Smartphone Holder. I chose this product because it is compact and low price.
The installation itself was co-tightened to the Mirror, but there is no problem.
View detail
I'm starting with Season now
I bought both cars as they were both on a 2-stroke
Until then, the mixture was made using a Graduated cylinder, which is a time-consuming I was doing the
I'm going to try to use a mixture of the two from Season now, depending on the situation
View detail
Fits: YAMAHA YZ125 14.5mm, SUZUKI DRZ400 SM 11mm, SUZUKI DRZ400 S 11mm, KAWASAKI KX250F 18mm, HONDA CRF250 R 18mm, HONDA CR125 R 18mm, YAMAHA YZ250 F 01-08 14.5mm, YAMAHA YZ250 F 09-16 18mm, YAMAHA YZ250 X 99-16 14.5mm, YAMAHA YZ400 F 99-08 14.5mm, YAMAHA YZ450 F 09-16 18mm, YAMAHA YZ450 F 99-08 14.5mm, HONDA CR250 R 00-07 18mm, HONDA CRF450 R 02-16 18mm, KAWASAKI KDX200 11mm, KAWASAKI KDX250 11mm, KAWASAKI KLX250 R 11mm, KAWASAKI KLX300 R ALL MODEL 11mm, KAWASAKI KX125 03-08 18mm, KAWASAKI KX125 90-02 11mm
A little heavy but sturdy and Compact
The body of the car doesn't have much of a slope when using the STAND, so you need to think about where to stop it or it will fall over
I don't blame you, though, because the angle will put a strain on the Swing Arm LINK
View detail
If only it was a little thinner …
These Snap Ring Pliers are surprisingly nice to have
Slotted screwdrivers and pliers are good for power, but Special tools are still useful
I bought it to remove the Snap ring that is sometimes used on the rear wheel hub
It was a wheel of FTR223 and I was able to remove it easily
Snap rings are sometimes used for Oil SealStopper, such as Front fork, and It is a good idea to have one to work with
If I had to pick one MinusPoint, it would be nice if the tip was a little thinner
A Large-textured Snap ring is no problem, but a Small-textured Snap ring And the hole that is drilled to insert the tip of this Snap Ring is small If you're a Pliers, you may not get in
You can ignore the hole and force the Snap Ring Pliers off by placing them around the hole You can do it, but I wish it was just 0.5mm thinner, and sometimes I think "hellip There was
In my case, I shaved the tips of the Pliers to a fine point, but I probably wouldn't sell them in this condition I guess it's a product safety strength issue
There's nothing wrong with the product, just that I'm trying to fight with this one pc and there's nothing wrong with the product It is not
The price is affordable and if it's fit for purpose, it's Recommendation
View detail
It's not for Harley
You need a certain amount of ground clearance to be able to use it, and the side stand side is even harder
The fixed handlebar for height adjustment cannot be rotated in the low position because it hits the floor
With this kind of lock, there's a risk of it coming off in the first place, but I don't know if you've thought about that at all if you've done the test, you can't release it to the world
Since it is lifted from an oblique position, it will interfere with the exhaust system, and it will be a good choice for the RANCase Interference with the cover is likely to occur frequently and needs to be adjusted on a case-by-case basis
The overall rigidity is also unreliable
As a result, it's not available
It was expected and we will proceed with the improvement arrangements
View detail
distress
RearTire uses Racing Stand
I bought it using only the front tire?
I tried to use it, but the frame moves! Let's go! Straighten up!
The Tire spins more heavily than you might expect
Well, I bought it for a wash-for-vehicle, so...!
Quantity of Roller:Pair (for Left and Right) to prevent flooding with Grease
View detail
Depends on the application
I use it for the smartphone folder fixation of ZZr1100 It doesn't shake by vibration and is firm After examining the fixation method using Screw in horizontal direction, vertical direction, and various places, the best position was found Found View detail
It makes washing the car underneath a breeze
I use it to wash my Motocrosser (YZ125)
I used to wash the car with the Handlebar over the MXSTAND so I could see the bottom of the car , it was too heavy and cumbersome to carry the STAND to the place where I wash the car
This Grip Score is about the same size as the Triangle stand, so it's as large as Easy to carry
View detail
Very good product
The weight is just right and it is very stable There is a thick rubber on the top to prevent scratches
My motorcycle, DRZ400SM (Lowdown), does not go under the bodywork I should have measured the height of the car before I bought it...... I am
View detail
Just like the sales pitch
As the sales pitch, it is thin, and Access is possible in a narrow place, and it becomes Combination It is easy to use and well made It's a tool that doesn't come around often, but it's not too expensive, so it's not a bad thing to have View detail
for Off-Road Simple Maintenance Stand
I bought it as a countermeasure against Puncture on the forest road etc., but there is no Center Stand The chain cleaning of the Off-road car is underway!
When lifting up the rear wheels, hold this product at an arbitrary length to the exhaust system side of the vehicle Pushing the body of the car into the STAND as a fulcrum, you can slide this product into the car
I feel like the lighter the car is, the easier it is to do
View detail
It's going up!
A simple STAND that is essential for those who need it but unnecessary for those who don't!
I bought the STAND for chain lubrication when I go out touring overnight By the way, I used to make my own simple STAND, but this one is easier to use
View detail
The price
I bought it for my Clutch master Overhaul I have a (90-degrees song type) Arm that hits the arm with the one I have I chose Straight, but the tip is thicker than I thought, so I used Grinder to shave it off I used it while adjusting it I bought this one to find a cheap one as possible because it was a hurried work, but it was a good price Capability No complaints View detail
Good product
It is used when the engine is off
It is a universal type, so it will be compatible with most of the single cylinder engines
As for the size limit, the instruction manual states that it is limited to 450 CC
It can be placed horizontally, so you can work with the Clutch or generator side up It is not a problem at the moment Because the Slide part is fixed with Screw, it is not possible to fix firmly, but for now, the problem is None I want another one because the price is reasonable
View detail