Reviews
The CT125 vibrates less!
I thought that the Handlebar Brace was not supposed to reduce vibration, but when I put it on, I felt that the vibration of the Handlebar was reduced. Also, the black chrome has a high quality feeling and looks better. View detail
Parts required to install Handlebar Brace
This is required to install the Handlebar Brace. View detail
Fits: SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI SV650, YAMAHA MAJESTYS, SUZUKI GSX-S125, SUZUKI GSX-S125, SUZUKI GSX-S125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX, HONDA PCX, HONDA PCX
I don't have any complaints, but...
I bought this for mounting the Smartphone Holder on the Mount.
It was easy to install, but I felt like I had to tighten it halfway.
I had a USB port installed when I bought my new car, but this USB port got in the way of the installation process and I had to move it around a bit.
If you want to have more room for installation, we recommend you to buy the Handlebar Brace with adjustable length.
View detail
Handlebar rigidity
I was expecting the stiffness of the Handlebar, but it's just an appearance Part.
It looks Custom, so I'm self-satisfied.
If you are going to install Smartphone Holder or USB power supply, I think this is necessary parts.
View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB, HONDA CL250, HONDA CL500, KAWASAKI Z650RS, SUZUKI Gixxer 150., SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI GSX250R, SUZUKI V-STROM250SX
Satisfied
I bought this product because I wanted to wear the Smartphone Holder and the watch, and in the case of the CT110 HUNTER CUB, the Smartphone Holder etc. became a good position, and it is easy to see and I am satisfied. There was a time when my hand became numb by the vibration when I drove a long distance, but I want to confirm whether there is an anti-vibration effect by driving a long distance in the future.
It was very easy to install the Bolt without straining the Handlebar because it is a special product.
The texture and paint job look solid.
I am satisfied with this product because it is cosmetically superior to similar products.
View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB, HONDA CL250, HONDA CL500, KAWASAKI Z650RS, SUZUKI Gixxer 150., SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI GSX250R, SUZUKI V-STROM250SX
I do not feel the texture
I bought this to mount my watch on my CT110 HUNTER CUB
I chose this product because of the low price, but the texture leaves a little to be desired!
I have no problems with the installation and the accuracy of the parts is perfect, but the surface of the Center bar, which is the most visible part, is textured and feels a little cheap.
I think the price is right for this area.
View detail
Fits: HONDA GROM, SUZUKI V-STROM250, SUZUKI GSX-S125, SUZUKI V-STROM250, YAMAHA MAJESTYS, SUZUKI GSX-S125, YAMAHA MAJESTYS, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, SUZUKI V-STROM250, HONDA PCX150, SUZUKI GSX-S125, HONDA PCX150, SUZUKI SV650
Handlebar vibration reduction
[How is it used?
I bought this to reduce vibration on my Handlebar.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It was easy, I think it took about 5 minutes to install.
How was your experience with it?
The vibration seems to have become less pleasant. It is convenient to attach a portable Holder.
[Included Parts:were they on?
It's not attached.
[Was there anything that disappointed you?
Nothing.
View detail
I'm using it for a different purpose.
I installed the Handlebar for the purpose of using it as an auxiliary bar for the water temperature gauge amplifiers and the Drarecorder Switch.
(So Handlebar is also a weak Material that needs this bar):(It's still OEM, not Aluminum)
We are satisfied with the Accent in terms of Design.
It is also available in a variety of lengths, and the mounting flange is sold separately in a variety of colors.
View detail
Fits: HONDA 400X, KAWASAKI W800, KAWASAKI EPSILON150, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S, HONDA CB500X
Scooter for commuting
I installed it after I replaced it with the HURRICANEHandlebar Kit. It looks much better. View detail
Fits: KAWASAKI Z125 Pro, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FAZE Type S, HONDA FAZE, HONDA glom, HONDA PS250, HONDA PCX150, HONDA PCX125
Extra thick and not bad looking.
I was wondering if the length would fit, but I was able to install it with the SS Size, and since the Handlebar is black, I think it fits well with all black. View detail
good
I installed it on my PCX.
I think there is just a little bit of Gap and I think I can prepare a suitable Washer to handle it.
The body itself is solid and satisfactory.
View detail
Fits: KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, HONDA PS250, HONDA glom, HONDA FAZE, HONDA FAZE Type S, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MAXAM, YAMAHA MAJESTY250(SG03J), SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S
It is easy to install.
Unfortunately, the Red was sold out in Blue and Gold, so I bought the Black one!
The Clamp section can be split for easy installation.
I'm happy with the price and good construction.
View detail
As long as it's in place, it's fine.
It's in the reviews of others. "Adjust comes loose on the road. It's not likely to come loose if it's tightened firmly in either direction. I've been walking about 100km in the mountains, but it didn't loosen up. It is not loose if you tighten it firmly to either tighten or shrink it according to the shape of Handlebar because I was worried about it. View detail
The Shaft and Clamp are the Quantity:It's a set, so it's good.
The color difference between Shaft and Clamp is good, the rigidity of Attachment is good and it is the best for MONKEY125. Unfortunately, the shaft thickness of the shaft is 2mm large and it is the best product (because the diameter is small for the installation of Drink holder, I was able to install the Rubber van Kamase). View detail
The variable-length Handlebar Brace is really useful.
I installed this Handlebar Brace on the CT125CT110 HUNTER CUB to use for various mountings.
Concretely, I will mount the Universal Screen of the Handlebar Mount of MRA to this Handlebar Brace instead of Handlebar.
Delayed delivery
With the Handlebar Mount installation, the range of motion is usually wide, but in reality, there is little or no adjustment range.
As I have a herniated cervical disc, it is absolutely necessary to have a windscreen with high wind protection, so it is mounted on a horizontal bar to secure the range of motion.
This way, if you just want to swing up and down, you can move completely freely.
It is possible to cover up to the top of the screen, although there are some restrictions on the screen's installation angle.
Of course, I'm also going to install Ram Mount's XGrip Ta BrettMount and Droreko BodyMonitor's Mount
View detail
Solidly built.
I bought it with the same manufacturer, Brace, but I didn't learn enough and it was too Exactly I couldn't adjust Clamps, so I shaved a little bit with Grinder, but I shaved it off. The cylinder hides the cylinder so there should be no problem with its appearance.
View detail
It's a little tight.
I bought this one from a reviewer who uses it on his ZrX1200 DAEG.
It's definitely a good fit, but I couldn't adjust the angle of the Clamp, so I had to cut the Clamp down a bit.
View detail
That would be handy
Later, I bought it to attach a Porch to put in a Small object etc. 。 You can also attach a smartphone holder to this product if it's attached, and you can also use the A I recommend it because it gives a little bit of a custom feel. 。 View detail
Fits: KAWASAKI Z125 Pro, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FAZE Type S, HONDA FAZE, HONDA glom, HONDA PS250, HONDA PCX150, HONDA PCX125
It's more than a utility bar
It's my intention to make the Handlebar area as simple as possible, but it seems to be the case that the Grom's The thin iron Pipe is not encouraging and looks shabby; it's a Large standing bar I'm also somewhat worried about the strength In fact, when I pick up the Gap while HardCornering, it is a little bit shaky I thought about replacing the Handlebar, especially to make it aluminum (a little more forward leaning) I don't have a suitable one (and it's easier to ride), though I'm worried about the strength if I don't make it a fat bar Clamp has to be changed, and I'm worried about handling Hose and Cable, so much for that I don't want to do it As far as I'm concerned, as long as it has the necessary strength, it doesn't matter if it's iron or not So, what do you think of this kind of Handlebar Brace? I've always thought it was a standard reinforcement method for Off cars
But, according to my trusted motorcycle shop, the It's just for decoration, you know, because a lot of people wear their phones and stuff Well, do it with a USB power supply, smartphone holder, etc I don't want to Of course I don't need ETC, and I don't want to use RAM-MOUNT's clamp type (not resident) It's very easy to use, and Navigation is rarely used Since you won't need it, you can only clamp to the Handlebar when you really need it, and You can only use the Smartphone Holder for that time Then, when I shoot driving videos with my GoPro, I like to have a place to clamp it There is also a method of clamping directly to the Handlebar, but the angle is quite high So it is somewhat difficult to adjust the position
So...I decided to put this Handlebar Brace on First of all, I only expected it to be an utility bar. 22mm thick type I didn't want to make it stronger or anything, but simply because it's the same thickness as the Handlebar The RAMClamp is easy to install
As a result, the parts that arrived were extremely heavy It's actually very heavy It's very difficult to adjust the angle of the clamps Clamps are not in between, so I have to loosen up Perfect rigid mount with 4 screws After fixing the bar, the position of Lever was returned
So when I ran after installing it, I was pleasantly surprised by the miscalculation As I mentioned above, I wasn't expecting it to function as a Handlebar Brace at all The feel has changed properly First of all, the vibration is reduced There may be an effect of the vibration absorbing Hand guard that I just installed the other day It's even less And yet, it feels like you're touching something extremely hard, and the front area is even more relaxed It was Example Brrrr There is no face White, I deliberately picked up the Gap with the front wheel many times, but I went over the stoner and It is
At best, it's nimble and at worst, restless, which is the fate of the front and rear 12-inches groms Front in particular is vulnerable to disturbances, and when you step on the Gap in the middle of Corner, it's quite unpleasant! It got better Of course, the Stem Stabilizer from OUTEX, which has already been addressed, and KOOD's Thanks to the ChromolyShaft, Front was already better for Large I'm not satisfied yet, and I've already decided to change Spring and Fork oil Parts have been ordered Brake will be strengthened in the future So, considering that the load on the Front will become even more The Handlebar Brace feels reassuring
At first, I only intended to add a utility bar, so it was a nice miscalculation Ta I mean, the product is properly named Handlebar Brace! So I think it will meet the expectations in that direction as well If it were just about strength, though, I think the thin one would be enough
View detail
Fits: KAWASAKI Z125 Pro, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FAZE Type S, HONDA FAZE, HONDA glom, HONDA PS250, HONDA PCX150, HONDA PCX125
I think it has excellent performance, looks and cost performance
The purpose of purchasing the Handlebar Brace was to get a dress-up and a handlebar surround It was for the installation of Mobile phone and others
The first purpose of the Dress-up is as plain as I aimed to be when I saw it installed in person (lol)
I wanted to create a tighter look by using Black in the various color products sold on the market was good
I think that this product itself is simple and is a good product However, if it is possible, please make the Cap screw of the attachment also Black to match the color of the body I wanted it ← Is it too plain? (Laughs)
It's a length, but at 240mm in SSSize, I think it's just right for me
The next step is to increase the rigidity of the car when it is entering the corner and while cornering The vehicle body will not be stable when adjusting it, but the handlebar area, front fork We thought it would be better if we increased the rigidity
There are several parts to increase the rigidity of the front area, but this time we will use the Handlebar I chose the Brace After I installed the Brace, I took it for a test run on a short mountain road that I often drive on, but it was pretty good So-so? It came to be able to trace the Line as I thought To become able to be able to do Cornering comfortably, there is still more to be done including the skill
Regarding the installation of the last Mobile phone etc., it is Mobile I haven't received my phoneHolder, so I haven't been able to try Mobile phone I installed a WearLOVE Le Camera (GoPro) But I didn't want to use it because the visibility of the meter would be compromised & the Camera position would be too high
These are the ratings for Large bodies
I'd like to add a review if I find out any other details
View detail