Reviews
Used for external Muffler baffle
[How is it used?
External Exhaust SystemSlip-on Silencer was used because of its explosive sound.
Was the one you received as per Image?
BaffleExactlySize is not available, so it is processed and used
Was the installation difficult?
It was a little difficult because of the special Baffle shape.
How was your experience with it?
Volume dropped moderately.
[Included Parts:were they on?
With Wire for fixing
[Was there anything that disappointed you?
I wanted more Wire.
The excess was sealed with zip-lock to prevent shattering.
View detail
Purchased because I wanted to make the Exhaust System sound smaller.
I felt that the sound of the replaced Exhaust System was a little too Large, so I wrapped it around the inside Baffle.
The attached needle Gold felt short.
Perhaps the winding was not done properly, but the exhaust pressure caused the Glass Wool inside to pop out through a narrow gap in the Baffle's mounting.
Did I put the wrong front and back on? I thought so and put a new one on the opposite side, but the same thing happened.
Not enough windings? The sound did not drop that much, but the effect is not entirely absent.
I don't think there were any instructions on how to install it.
We'll see how it goes for now.
I haven't run 50 km since then, but the Glass Wool stopped coming out of the inside, so I looked inside and the Glass Wool is thinner than the amount that came out. (Lol)
It didn't seem to have much durability. (It could be because of the way I wind it.)
I have never used Glass Wool from other manufacturers, so I have no idea if this product is bad or if Glass Wool itself is like this, but I will try to use a different manufacturer's product next time I buy one.
View detail
Not as durable as I thought it would be.
Used in Silencer, an Other Brand Product.
It's a personal subjective view, but it gets torn apart rather quickly.
The Punching of Silencer was clogged in the part where it was not wound.
Probably the keba on the surface has been burned off and peeled off.
As for muffling, you can adjust it by the amount and area of the roll, if you're willing to go through the trouble.
Rose, wind up, run and check the volume repeatedly.
In the meantime, I was able to get rid of the uncomfortable muffled sound in Silencer with the perfect amount and roll.
If you want, Material.:I would like the Stainless Steel needle Gold to be longer.
View detail
Easy to use
I wrapped it around the external exhaust system when I replaced the Baffle
The volume is well controlled, but the rest is durability
The Stainless Steel Wire is also included and is very useful
View detail
4.0
When I changed Shaffle's Baffle, I used this product because it was an explosion. The effect was absolutely Large, and it turned into an elegant sound quality. If the attached needle gold is a little longer it is none to say. View detail
It will silently sound
External system outside the company is a bit annoying, purchase for the purpose of muting.
Description and Material : Because the needle Gold of Stainless Steel is also attached, it is appreciated that it is easy to set.
The Glass Wool has a direction to set, so that the fiber surface is brought to the downstream side of the exhaust, and then the needle gold is wrapped and the work is finished.
Set exhaust sound, it is silently muted and I am very satisfied..
However, although I do not know how long aged deterioration is, since the price is very cheap, I think that it is unnecessary to worry much about deterioration condition after exchanging since it got worse.
View detail
Why not?
Purchase for winding on Baffle.
With needle gold, scattering is difficult, if you match the price with Large price pear.
When storing it in excess, let's keep it with Zip lock.
View detail
Used for MORIWAKI muffler
Buy Size because it is not quite long.
After all it was not enough capacity (Lol)
MORIWAKI's Exhaust System has a long cylinder. I thought about attaching it firmly This is Quantity : I need 2 sets. This time we made it alone in time, but it became quieter than I thought.
View detail
Recommended for for Repair!
I purchased it for Drag pipe for repair. Since the fixing needle Gold is also attached, it is recommended because it can be installed immediately. As Glass Wool is a consumable item, those who are looking for something of lower quality and lower quality think that this product is good. View detail
The Glass wool of RD50 which passed 30 years was hard like a stone in the Oil.Since the sound deadening effect was also lost by the secular change, they are a Glass wool of a KIJIMA, and exchange.In the case of RD, width was started to 10 cm and long 20cm
The Glass wool of RD50 which passed 30 years was hard like a stone in the Oil.Since the sound deadening effect was also lost by the secular change, they are a Glass wool of a KIJIMA, and exchange.In the case of RD, width was started to 10 cm and long 20cm, and was fixed to the Silencer by the Stainless wire.The
exhaust sound became low a little.Since the Glass wool is the shape of 5-mm-thick cloth, processing is easy.Since an exhaust port will be choked if it winds merely not much thickly, certainly fixing is important also for one layer.
View detail
[Webike Monitor] It was used when the old YOSHIMURA Silencer was welded and attached to GPZ 900R. Since it produced when he wanted to take out the atmosphere of the ancient times, but it was a MODEL of Saki of sound-volume regulation, s
[Webike Monitor] It was used when the old YOSHIMURA Silencer was welded and attached to
GPZ 900R.
Since it produced when he wanted to take out the atmosphere of the
ancient times, but it was a MODEL of Saki of sound-volume regulation, sound volume was large, and since it was mourning also over the Glass wool which was contained from the first, it purchased, and attached.
Although the thing with the large
Size was purchased, the direction to the extent that it remains rather than small thought that it was good.
View detail
It is used for the silencer of the delta of WR250X. Although a hand riveter etc. are needed for attachment, it is fairly easy work! steel wool is also contained in the silencer of a delta inside glass wool, and it also removed and exchanged them -
It is used for the silencer of the delta of WR250X.
Although a hand riveter etc. are needed for attachment,
it is fairly easy work! steel wool is also contained in the silencer of a delta inside glass wool, and it also removed and exchanged them --- which did not change sound volume so much even if exchanged for the glass wool of this kijima at the sake -- this is the selection mistake of my goods.
However, I think that it is the merit of goods that it can hold down to the sound volume of the same level only by glass wool.
The engine performance of goods is a cinch.
They are four stars!
View detail