Reviews
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR
It is an amulet.. Lol
Trust MORIWAKI? I was worried about the other Slider but decided here with MORIWAKI of price and trust. I prayed that it will not be scratched all the time. Because the Protect effect is unknown, I will leave it blank. I think that damage will be alleviated even if the fall collapses by any chance. Are you safe with Fall down now? View detail
Well
I marked the position on the stamp, and although the diameter of the Slider was 50 mm, I wanted a little Clearance so I decided to open a man's hole with a 53 mm Hole saw!
After all Slider's front side Clearance is Limit.
There was a hole in the middle of OEM's Bolt so it might have been Exactly - -
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR
Just in case
To loosen the original engine mount bolt 9. Because it seemed likely to break on 5 sq spinner handle. I finally loosened using 5 sq spinner handle. I think that socket wrench alone did not relax. Although it may have been stuck because it was attached to a used car that had fallen five years. If you do not have a 14 mm glasses wrench, socket wrench, socket extension bar, torque wrench and tool, you may want to have it installed at a motorbike shop. As a precaution, I installed the jack up under the engine. Even if you do not have it, so many comments are attached so it will be okay.
View detail
There was a real experience experience
We confirmed the effect when it toppled over while driving.
I stopped at the shoulder so that the car body fell down and fell down.
Slider was erased like half Rubber and it was scraped cleanly by about half.
Thanks to this, only the footpeg, Blinker, Mirror and Bar End of the car body Damage has been completed.
View detail
Absolutely - - -
To protect against falling, because it is your favorite Manufacturer purchase.
Replace existing Bolt and install.
* Engine Because it is hanging Bolt please support and replace the bottom with Jack.
CrankcaseQuantity : Pair (for Left and Right) Since it is installed in front, it does not protect completely from the scratches of falls, to the extent that it reduces Damage to the last.
View detail
Easy to install, length and size is correct, Does not collided with with the engine body, white Skid Pad recognizable good, will introduce their friends to buy. *** Easy to install, length and size is correct, Does not collided with the engine body, white
Easy to install, length and size is correct, Does not collided with with the engine body, white Skid Pad recognizable good, will introduce their friends to buy. *** Easy to install, length and size is correct, Does not collided with the engine body, white Skid Pad recognizable good, will introduce their friends to buy. , The white Skid Pad is very recognizable and will introduce my friends to buy it. View detail
This is my first time to buy Skid Pad installed on my motorcycle, Installation is very simple, can be completed in about 20 minutes, the length and angle of protection are correct, highly recommend a product. --- This is my first time I bought the slider
This is my first time to buy Skid Pad installed on my motorcycle, Installation is very simple, can be completed in about 20 minutes, the length and angle of protection are correct, highly recommend a product. --- This is my first time I bought the slider and installed it on my motorcycle. The installation is very simple. It can be completed in about 20 minutes. The length and protection angle are correct. It is a very recommended product. View detail
I think it's good!
First of all trustworthy Brand that everyone knows. I chose Black, but it is cool without noticeable. I have not taken care of it yet, but should also demonstrate the function by any chance. It is convincing in terms of Cost. I think it's good.. View detail
As a security fee
CBR, Cowl detachment is Large strange,
It was Large strange to attach Cowl with Slider attached.
But,
The position to open the hole is properly in the design drawing,
It is good to use it because it suffices to cut it together.
It is a necessary item to prevent Cowl and Engine from being bowed down in case of a fall
View detail
To VT 250 SPADA
For some reason VT 250 SPADA's engine hanger can be installed just right
There was no problem even if it fell down
It is also good to buy at a low price
View detail
I am careful not to take care of me
We installed it to prevent the damage expansion at the time of standing on the street by any chance. Although I asked Dealer to install, I think that it will be completed in about 30 minutes even if I work by myself. I will be careful about handling so as not to take care of him. View detail
Easy
It was extremely easy to install ^ _ ^
Just remove the pure Normal Thread Screw and install it.
Hexagonal Wrench 1 pc, it took less than 10 minutes.
Even if you should stand standing by this, Large is durable!
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR
MORIWAKIEngineerRing Straight Skid Pad
I installed it for standstill measures.
I thought as general black color but I thought that white color would also be Accent?
I thought that it is good for luminescent style Starlight, so I decided here.
About installation, it was completed in about 15 minutes with no particular problem.
The light condition of the most, Tunneletc. When it enters a dark place, it will shine with the color of Green Light. It will be how long the phosphorescent function lasts - - -
Also, when I installed it, I noticed that Pad's Length is Quantity : Pair (for Left and Right) It was different.. Right Side seems to be setting 10 mm longer. Those who adhere to Shimme Bird need attention (It seems that you can purchase the same size with for Repair)
I would like to be careful not to take care of the original purpose.
View detail
Rear Sets
By installing JetCowl, I switched it because the Engine Guard I had attached will interfere. It will be inside Cowl, but worst can be avoided.... View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1300 SF
The other day I got a brand new CB1300SB and installed the skid pads by myself. 270kg is really heavy. It would be difficult to stabilize the vehicle once you lose balance, even if you're used to it. I experienced it when I was making a U turn. But th
The other day I got a brand new CB1300SB and installed the skid pads by myself. 270kg is really heavy. It would be difficult to stabilize the vehicle once you lose balance, even if you're used to it.
I experienced it when I was making a U turn. But thank god it only made a slight scratch on the skid pad and exhaust. I think begginers should have this.
OEM products are expensive and cost nearly twice this price. This one is sufficient enough.
View detail
The Moriwake skid pad is a high quality product that comes complete with all mounting hardware including longer bolts. It is very easy to fit being careful to remove/install the bolts one at a time. Installation took about 15 minutes only. Let's hope
The Moriwake skid pad is a high quality product that comes complete with all mounting hardware including longer bolts. It is very easy to fit being careful to remove/install the bolts one at a time. Installation took about 15 minutes only. Let's hope they never get used!! View detail
But the Engine purchased this Skid pad there to protect there where it is conspicuous too much in an Engine guard.Although it had come out also from the Manufacturer besides , the MORIWAKI was chosen by the Manufacturer which can trust it too.When
But the Engine purchased this Skid pad there to protect there where it is conspicuous too much in an Engine guard.Although it had come out also from the Manufacturer besides
, the MORIWAKI was chosen by the Manufacturer which can trust it too.When
attachment also worked as the description, it was able to attach easily.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZrX1200ZrX1200 DAEG
The Skid pad of the MORIWAKI was attached to ZRX1200DAEG. Although it is the parts which suppress the damage at the time of a fall once, it has Dress-up[ up ]-ized thoroughly. It becomes tight only by having attached. attachment removes an En
The Skid pad of the MORIWAKI was attached to ZRX1200DAEG.
Although it is the parts which suppress the damage at the time of a fall once, it has Dress-up[ up ]-ized thoroughly.
It becomes tight only by having attached. attachment removes an Engine mount bolt, replaces it with an attached long Bolt, and only attaches a SLIDER50, a Base, and a Spacer.
Damage will be minimized when there are some big Engine guards, but appearance is also important too.
I think that this product has served as and arranged both.I think that it is cheap shopping since it is not the parts exchanged first of all throughout life once it also attaches [ there, then / sushi ] amount of money.It is only driving safely so that it may not become hollow after (smile).
View detail
It has fallen on left-hand side accidentally during a slalom run at a certain run meeting.The Engine was unhurt although it was during low speed running, and the Skid pad had deleted the upper part.Although the Crank Case guard who purchased simultaneousl
It has fallen on left-hand side accidentally during a slalom run at a certain run meeting.The Engine was unhurt although it was during low speed running, and the Skid pad had deleted the upper part.Although the Crank Case guard who purchased simultaneously was also able to delete a little bottom, the Case main part was able to be protected.After that, the Skid pad ground the damaged part and carried out black paint.it can use and still meets -- since it came out and carried out.Although I have been
indebted, I appreciate that the main part of an Engine was able to be protected.We recommend you simultaneous purchase.
View detail
The Radiator was safe, although the Front was taken by the float gravel, the crack went into the Mirror and the Muffler although it was a Slip Down, and it turned at the brake pedal, and it could not be returned to origin but broke. It
The Radiator was safe, although the Front was taken by the float gravel, the crack went into the
Mirror and the Muffler although it was a Slip Down, and it turned at the brake pedal, and it could not be returned to
origin but broke.
It turned at the Bolt, the crack went into the Frame, and the
angle also merely became amusing.
It is good in that there is intensity to a slight degree.
View detail