Reviews
Fits: YAMAHA SR400
You should pay attention to them from time to time.
Kick start, synonymous with SR400.
The Kick Arm that I have been using for many years still seems to work, but I feel fatigue (Gold fatigue), and if it breaks in the future, I will no longer be able to apply Engine, so I renewed it.
Kick start
‥To start Motorcycle and other Engines using Kick starter.
What is Motorcycle's Kick starter? ]
The electricity from the battery is used to rotate the Cell Motor, and the engine is started by the power of the Cell Motor. Cell start In contrast, the Rider's own kicking force is used to start the Engine. Kick start." is 。
The benefits of Kick start.
No burden on the battery.
Cell start motorcycles use electricity from the battery when starting, but kick start motorcycles do not require electricity when starting. Therefore, the battery is not burdened, and battery buildup can be suppressed. In addition, even if the battery does run up, the Kick start motorcycle can start the engine manually, which can be helpful in an emergency.
However, if the engine displacement volume is a CUB or something like that, there is also a demerit for Kick start.
[Demerit]
If the force to step down on the Kick pedal at the start is insufficient, not only does the Kick start fail, but the Kick pedal may jump up in the opposite direction with great force. The so-called Ketin." Ya Kickback." This phenomenon is called "ketchin". When kettling occurs, some Risks are hit hard on the shin or other parts of the body by the Kick pedal that has bounced up, causing them to faint in agony.
Ketching Prevention
There are two ways to prevent kettling:using Decompression or not using Decompression.
. How to use Decompression."
The KICK pedal is then lowered vigorously and the engine is applied.
. How to do it without Decompression.
After returning the Kick pedal completely to the top, step down the Kick pedal to the bottom again to start the engine. 。 This is the basic way to hang an Engine using Kick starter.
Kick pedal and Kick Arm.
There are some precautions to be taken when installing the product.
This is the relationship with the Pedal position.
If you are replacing the footpeg with an external footpeg, the Arm itself has less clearance, so there will be interference→at that time, please return to the OEM footpeg.
The OEM footpeg is too large and interferes with the exhaust system. →Kick Arm is OEM.
Replacement is not difficult, since all you have to do is remove the bolt attached to the base of the Kick Arm and replace it.
However, the place where the Arm fits is geared, so be sure to insert it properly aligned with the gears.
View detail
Used for Tank on Ninja1000sx
[How is it used?
The tank of the Ninja 1000sx is wide, so when touring long distances, the sitting position is inevitably shifted to the front. When I was riding Z650ABS, I used the same manufacturer's standard (black), but I was concerned about the floating of the glue, so I changed to SILICON this time.
Was the one you received as per Image?
Color is Color:It is so close to Gray that when attached to Black Painting, it looks like it is floating. It is not so bad once you get used to it, but I would have preferred a stronger black look.
How was your experience with it?
Functionality is fine. It has a firm knee grip.
[Points to note]
The location of the paste is unknown and must be confirmed on the ManufacturerHP.
How did it compare to other products?
I feel that the texture is not as good as the company's Standard, but it is supple and does not seem to peel easily.
Requests, etc. to Manufacturer
I noticed a lot of White paper dust on the product when I opened the product. Perhaps dust from clothes will also be a concern in the future.
View detail
For Day Trip Touring
[How is it used?
I purchased this bag to hold my baggage for a day touring when I took delivery of my Ninja 1000sx.
Was the one you received as per Image?
The Large size and texture were exactly as shown in the Image.
How was your experience with it?
It is about 1/3 capacity with Rain Suit, Touring net, simple tools and small things.
It can be expanded with a fastener, so there is no problem when storing souvenirs, shirts, etc.
The top lid area is glossy Black, so abrasions will be a concern in the future.
[Points to note]
KBelt is convenient, but I am concerned that it will gradually shift forward when driving.
How did it compare to other products?
I used to use Single side bag for my hand luggage, so I have to be careful when I straddle it when I ride.
The drawback is that it is not easy to use, but I like the simple look of the product.
[Installation hang].
The center belt for attaching the KBelt must be tightened firmly when driving.
Note that it will shift forward.
View detail
Purchased for my 3rd grade Small School son.
Was the one you received as per Image?
Coloring was as per Image.
[How did you feel about the Fit?
When worn by a Small School 3rd grader (135cm tall, slender), the sleeves and body length were too long, though,
I think they can be worn for many years even after some growth.
How was your experience with it?
I have purchased ANSWER Jersey before, but it frayed while I was using it.
It was coming out. We hope that will not be the case this time.
[Was there anything that disappointed you?
No problem except that the Size is Large.
How did it compare to other products?
I expect that the sewing and texture is better than FOX's Jersey, so it will not deteriorate over time.
View detail
Good texture
[How is it used?
Purchased at the same time as the 65-piece AutoMechanic set from the same manufacturer.
Was the one you received as per Image?
The Matte texture is pleasant to the touch and the Laser marking is very clear.
How was your experience with it?
There is no dimensional error and it fits Snap and Nut so it is safe to use.
View detail
Focus on appearance
Shift sensation feels smoother.
The entry into Neutral does not change.
Custom parts that look more or less the same.
I think so.
View detail
It was possible to install on VSTROM250SX.
It was possible to install on VSTROM250SX. View detail
Think in terms of replacement frequency, not Power
I don't think there is anyone who can perceive the increase in inhalation efficiency by 0.5ps at Peak with SEROW in the product description.
I'm more of a wash and reuse kind of guy, but it's a lot more work than I thought it would be.
According to the official procedure, wash with Cleaner→ wash with mild detergent→ dry for a day→ apply Oil→ wait 6 hours and when Oil settles, you can drive.
Almost two days if you follow it exactly? If I wash on Saturday morning, I won't make it in time for Touring on Sunday.
If you're the kind of person who changes filters once or twice a year, OEM replacement would be better.
I guess it's for people who want to go as fast as possible in an hour-long Race to change filters in a month, which is often run in Course.
View detail
Interference with clutch lever
[How is it used?
Daily use such as commuting
Was the one you received as per Image?
Not on Image Street.
Was the installation difficult?
Difficult.
How was your experience with it?
Grip slips.
[Included Parts:were they on?
Already included.
[Was there anything that disappointed you?
It was mentioned that the Small diameter was used to reduce interference with Lever,
Interference was found. close to the Switch box up to Limit,
I used a curved Clutch lever and it interfered with the Flange.
Flange diameter of this product:Φ57mm
OEM Product Flange Diameter:Φ44mm (measured with Caliper)
This will cause interference.
View detail
Red is good for Motorcycle's Accent.
My local Motorcycle store only had Black, so I purchased Red and was able to install it and am happy with it. View detail
A must-have stand for circuit bikes
The bike I prepared for entering the circuit this time did not have a side stand.
I couldn't prepare a side stand, so I had to prepare it by leaning it against the wall.
When I looked at the products used by other players, I saw that they used a lot of JTrip products.
I also used JTrip for the front and rear stands. I bought it.
It seems thick and sturdy. I recommend it! -------------------------------------------------- -------- The bike I prepared for entering the circuit this time did not have a side stand. I couldn't prepare a side stand, so I had to prepare it by leaning it against the wall. When I looked at the products used by other players, I saw that they used a lot of JTrip's products. I also used JTrip for the front and rear stands. I bought it. It seems thick and sturdy. I recommend it! Powered by Google Translator
View detail
It's convenient, small and good.
I am currently using the center front stand.
The disadvantage is that it is bulky, heavy, and requires an adapter to be carried.
There is a risk of losing the adapter, so I ordered a stand that hangs on the fork.
First of all, it is very light and has little space. It's easy.
Very satisfied. I think I will only use this from now on. -------------------------------------------------- -------- I am currently using the center front stand. The disadvantage is that it is bulky and heavy and requires carrying an adapter. There is a risk of losing the adapter... so I ordered a stand that hangs on the fork. First of all, it is very light and has little space. It's easy. Very satisfied. I think I will only use this from now on. Powered by Google Translator
View detail
These are simple and nice gloves.
I ordered these gloves to simply use for commuting to and from work.
The overall material is cotton and mesh.
The areas that need to be protected, such as the back of the hand and the bottom, are thickly reinforced.
It seems to be a good product for light use.
It has a large mesh area, so it would be good to use in the summer. -------------------------------------------------- -------- I ordered these gloves to simply use for commuting to and from work. The overall material is cotton and mesh. The areas that need to be protected, such as the back of the hand and the bottom, are thickly reinforced. It seems to be a good product for light use. It has a large mesh area, so it would be good to use in the summer. Powered by Google Translator
View detail
An air pressure gauge is recommended.
I ordered an air pressure gauge to use on the circuit.
I usually use snap-on products. The price is very expensive and it is discontinued so it is difficult to find.
This product looks a lot like a snap-on.
When I actually used it on the circuit, it worked well and was easy to use.
The price is cheap and I recommend it. -------------------------------------------------- -------- I ordered an air pressure gauge to use on the circuit. I usually use snap-on products. The price is very expensive and it is discontinued so it is difficult to find. This product looks a lot like a snap-on. When I actually used it on the circuit, it worked well and was easy to use. The price is cheap and I recommend it. Powered by Google Translator
View detail
Nice touch - but problems for yourself
Installation is a nightmare. You have to remove your whole tail assembly except you subframe. The new undertray comes with battery slot, but misses some of the grooves required to route wire harness. Putting back the tank had challenges. Fitment is ok. View detail
Nice touch
Fit was good. Atech gave ample cushion strips. Use abundantly to avoid vibration. Installation requires the removal of the OEM tail pieces. 1hr job max. View detail
MAGNUM is good
It's sound art. Size, color, and color don't come out. Korea chose this product because of noise regulations, but fortunately, it can pass. View detail
Fits: HONDA CBR 600 RR ABS , HONDA CBR 600 RR , HONDA CBR 600 F SPORT , HONDA CBR 600 F , HONDA CBR 1000 RR FIREBLADE SP ABS , HONDA CBR 1000 RR FIREBLADE SP , HONDA CBR 1000 RR FIREBLADE ABS , HONDA CBR 1000 RR FIREBLADE
Genuine JT Sprockets Rear for CBR600F 2006
Purchased along with the front sprocket as spare to replace my stock ones when needed. Have used JT sprockets for many years and know they are brilliant quality and do last a long time compared to some other brands. Decided to go one tooth smaller for a bit of a punt to how this compares to stock gearing. Pretty asy part to find, I was surprised Webikes stocked them really and quite a few different versions for different models and makes. The cost of the sprocket was excellent value. I also ordered along with other parts so the cost shipping was spread out too. My delivery was at my door and there was no damage during transit. Webike warehouse took the time to make sure that nothing moved during transit as these sprockets can make a mess of other parts less sturdy. The machining of these sprockets is second to none and I have said this from day one of using them. The spacing for the bolts is perfect. No problems with anything really. I have not found a sprocket that is of high a quality for the simialr price before. I will stick with JT Sprockets. I have fitted many many times before and know how they go on really easy little job. As I said, great quality parts from a great UK company. Thanks Webike for the great service as always and help with anything I need. View detail
Fits: HONDA GROM125
Genuine Honda Front Indicator Assembly for MSX125 2017
This was purchased due to a small fall and the front and rear indicators got some damage. The correct part was a little tricky to find as the Honda schematics aer not perfectly clear, but I got the right one in the end. The original part number was now superseded to this newer version free of charge by Webike, so that was nice. The cost of the assembly was slightly cheaper than could be sourced locallly but the local dealer did not have this in stock. I also added a few other parts needed for this repair to my order and this meant the cost of shipped was good value. My orde rarrived in 5 days from being shipped and everything was in 100% perfect order. The indicator assembly came in the Honda box and was wrapped in a padded material. The assembly itself is well made and all the joints to the lens are spot on. The lens is crystal clear orange but looks amazing. The connector was kept safe too and it was just a plug and play fitment. Very pleased with this purchase. Thanks Webike. View detail
Large capacity, good design, and perfect stability!
I purchased this product because the design is consistent with the company's SeatBack, which I use.
Like the SeatBack, the material and details are well made and easy to use.
I used it for camping touring with Handle and it was very good.:Pair (for Left and Right) can be connected, making it easy to carry with luggage.
I was concerned about the stability of the bike before purchasing it because it is supposed to be installed without the Saddle Back Support, but it is firmly fixed and does not feel unstable at all when riding.
View detail