Reviews
Merit to wear any jacket you like.
Motorcycle SuppliesManufacturer's Jackets are all dorky, so I bought one to wear with my favorite clothes.
I think you should choose 1 Size below your normal size because it stretches quite a bit.
The elbow pad does not fit just by putting it on, so the position needs to be adjusted each time it is put on.
It is well ventilated, if not cool, in the summer.
It is less reassuring than Solidly's Protector, but it is more secure than not wearing it.
Cosmetically, I felt it was a bit expensive.
View detail
The sewing of the fingers is particular?
How was your experience with it?
Can I say that the good thing is that I don't feel anything special using it, and the folded seam allowance of Inner Sewing never hits my fingertips.
Leather is used in areas where there is a risk of injury in the event of a fall, while stretchy fabric is used in areas where there is a lot of flexing, so there is no sticking and it is comfortable.
I think it is best suited for touring and city driving.
[Was there anything that disappointed you?
So far, none
What are the specs of the product, such as protector?
I think it is sufficient for touring and city driving.
How did it compare to other products?
I used to use hit.air, but this one has slightly longer fingers or my fingertips don't hit the seam allowance.
Other items that would be helpful
Sewing is basically Inner Sewing, but only the middle, ring, and small fingers are sewn on the outside. Some obsession." I bought it because I felt that the
View detail
It's not that cool, but the structure is solid.
I used it for the first time on a May day with a maximum temperature of 27 degrees Celsius, but it did not feel that cool.
On the other hand, it may mean that the structure is solid.
The palm is made of Goat skin and seems to be durable, but I have just started using it, so its durability is unknown.
The fit was good and I was able to operate my phone without any problems.
View detail
Pants suitable for summer and lightweight.
I was looking for a cool and lightweight pant that is easy to move in. I like the shape of the hem, too, because I can easily slip them into my OffBoots. I choose "Just fitSize" because I wear my Knee guard on the outside. View detail
Fits: YAMAHA DT50, YAMAHA DT50, HONDA CD125T(BENLY50), HONDA CD125T(BENLY50), HONDA CD125T(BENLY50), HONDA NS50F, HONDA CD125T(BENLY50), HONDA NS50F, HONDA CD125T(BENLY50), HONDA CB125JX
DUNLOP K888 [3.00-17 4PR (45P) WT
Used for Front and Rear of CT125CT110 HUNTER CUB on repeat purchase.
I am satisfied with it because it is completely on-road for my own use, and the grip is reasonable and the size is larger than the OEM, so the ride is more relaxed and to my liking.
I am used to changing tires for the third time, but the rear tires are larger and require more hang time. Also, you need some tools.
As for Life, the center of gravity of the CT110 HUNTER CUB is closer to Rear, so the Rear decreases well. This time, SlipSign appeared after about 8000 km.
View detail
Fits: SUZUKI Address50, HONDA DIO FIT, HONDA DIO FIT, HONDA G DASH, HONDA DJ-1, HONDA DJ-1, HONDA DJ-1, HONDA TACT, SUZUKI SEPIA, SUZUKI LETS4, SUZUKI ADDRESS V50 (4Cycle), SUZUKI LETS4, SUZUKI CHOINORI, SUZUKI CHOINORI, SUZUKI CHOINORI, SUZUKI ADDRESS V50 (4Cycle), SUZUKI CHOINORI, SUZUKI LETS4Palette, SUZUKI LETS4Palette, SUZUKI CHOINORI
Low price is enough for Scooter
[How is it used?
I bought this tire because my SUZUKI/CHOINORI tire was cracked.
The manufacturer was not a manufacturer that we had heard much about, but since it is CHOINORI, we thought that a Tire with low specifications would not be a problem.
How was your experience with it?
The speed range of CHOINORI, which is currently in Dry state or not in use. (30-40km) I think it is a good Tire in terms of cost performance, although I am a little concerned that it does not have a good reputation in the wet state.
This time I did the tire replacement myself, but this tire did not have the light point Mark.
Tire's Rim was also a bit poor quality or BEET was a bit hard to raise.
How did it compare to other products?
I have not used another Tire in CHOINORI but will try a domestic Tire next time.
View detail
DUNLOP Dunlop Rim Band [17in.
The one that was installed when the car was delivered was replaced for the first time.
If the Rim Band is damaged, it can lead to puncture, and since it is not expensive, it seems to me that it should be replaced every time the Tire is replaced.
View detail
Fits: HONDA CROSS CUB, HONDA CROSS CUB, HONDA CROSS CUB, HONDA NS50F, HONDA NS50F, SUZUKI NZ250 1986, KAWASAKI D Tracker150 2016, SUZUKI WOLF50 1990, SUZUKI RG50 1990, YAMAHA YD250 1986, YAMAHA SR125 1995, YAMAHA SR125 1984, HONDA NS50F, HONDA NS50F, HONDA CD125, HONDA CD125, HONDA CB125 1980, HONDA CT110 HUNTER CUBCT110, HONDA CT110 HUNTER CUBCT110, HONDA CROSS CUB
DUNLOP Dunlop Tube
Tire is DUNLOP, so this is also DUNLOP.
Relief by Brand.
This is my first Motorcycle so I don't know all the details...
My personal view is that it is better to replace the tire tube once every two tire changes. (If you have enough money in your pocket, it would be better to replace the tire tube every time you replace a tire...)
View detail
Just the Right Quantity for Tire Replacement:Set
[How is it used?
I purchased this product to replace a SUZUKI/CHOINORI Tire.
This is the first time for me to exchange Tire by myself.:Set.
Was the one you received as per Image?
It was just as Image.
This Quantity:In addition to the Set, Air Valve Puller and Tire wax were additionally purchased.
How was your experience with it?
It was my first time to replace the tires.:Thanks to Set, we were able to successfully replace the Tire.
Lever was also Simple and easy to use, but Quantity:2 pcs is a little short, so I wanted to get another Lever with an irregular shape.
[Points to note]
I was careful not to damage the rim with the lever when replacing the tire.
How did it compare to other products?
There was also a Tire Lever from another manufacturer, but I thought this product would be sufficient since the frequency of tire replacement is not that frequent.
View detail
Size is also convenient to carry.
I take it with me when I go to the woods. It is lightweight and just right in terms of Size. I think the air pressure measurement is also accurate, which is important. View detail
Convincing texture
SizeAbout 820×I bought the one of 2000mm 。
I liked the texture of the Nylon raising on the front.
When I unpacked it, there was a smell peculiar to Rubber, so I dried it in the shade for a couple of days.
I was not sure if I wanted to go with a less expensive competitor, but I am satisfied with the DAYTONA product.
View detail
fairing
not bad looks good arrived with a few little chips on edges used some black touch up .and now you can not tell they were there View detail
Nice simple solution
much better than using sealant or silicone if you forgot, like did, to fill the rim lock hole before installing tube and tire. Nice simple solution for plugging the extra hole when 2. rim locks are not used.Using these to plug the extra hole in a rim makes the job easier and looks like it came from the OEM. These may be little things, but it's the little things that count to finish a job correctly. View detail
Fits: YAMAHA WR155R
WR155R Full Exhaust System Comparison
I have tried three Full Exhaust System, PROLinerXR-1⇒DAYTONA(IndonesiaYamahaOption)⇒Yoshimura cyclone. As for the comparison of the three systems, my personal opinion is that overall they are 1st DAYTONA (IndonesiaYamahaOption), 2nd Yoshimura cyclone and 3rd XR-1. They all have their pros and cons...
XR-1 is really noisy enough to break your ears in Tunnel, and when VVA starts to work, it stalls (Gas is too thin), so it is obvious that Injection controller and fuel condition are necessary. YOSHIMURA's total balance is excellent and he is able to drive on public roads with confidence, and he is able to secure satisfactory torque and power from top to bottom. Lastly, DAYTONA is my favorite with YOSHIMURA's fee ring with higher volume. Also, it is the only one with a baffle, which allows for simple sound deadening, and the exhaust pipe is the longest of the three, which seems to secure the Torque. The difficulty level of installation is the same for all 3 Rings. However, only YOSHIMURA's Fender Eliminator has a blinker that interferes with the pipe, so it needs to be relocated. In addition, the Gasket of the middle pipe is required.
View detail
Nice windscreen..completes the look of the new katana
Good looking and proper fitting windscreen For the new katana. I think it looks way better than the small original screen. it even helps a bit at highway speeds Up to 120kmph.or 70mph. View detail
Fits: YAMAHA Tricity155, YAMAHA NMAX155, HONDA CB500F, HONDA CB500X, HONDA CBR500R, YAMAHA VINO, YAMAHA MAJESTYS XC155, YAMAHA DELUXE, YAMAHA TRICITY125, YAMAHA TRICITY125ABS, YAMAHA JOG, YAMAHA TRICITY 155 ABS, YAMAHA NMAX 155, YAMAHA NMAX, YAMAHA FJR1300 A, YAMAHA FZ16, YAMAHA FJR1300 AS, SUZUKI V-STROM650, SUZUKI V-STROM650 XT, SUZUKI SV650X
I bought it as a Stock, but I replaced it as soon as possible and it works great!
I purchased it for Stock on April 6 and it was promptly replaced.
Even after replacing the battery, the cell was weak and rarely restarted from idle ring stop, so I checked the Fuse and found that the Fuse had not run out, so I checked the Plug and found that it was covered.
After the replacement, the cell runs well, and the car no longer has trouble restarting from idle ring stop.
It has about 13,000 km since I last replaced it with the same one, and I was hoping it would last a little longer, but the price is low, so it's a good thing.
View detail
Used for CRF250L
We used it to fasten X.A.M's Driven Sprocket.
The OEM is M10Bolt, so an M8 conversion Spacer is required to use this one.
The OEM tightening torque is 50 N.m, but when I tried to tighten it with the same torque, it seemed to lick, so I tightened it with a little less torque.
I wonder if you could write the stipulation Torque in the Package.
View detail
Light Touch Clutch Kit
It feels much lighter to grip than the NORMAL! I had to take many breaks during long tours due to tendonitis! View detail
It got brighter.
Replaced Headlight Bulb on Z125PRO.
The purpose was not only to make the engine brighter, but also to reduce the load on the battery (power saving). The Z125PRO had LED lights from the beginning, so there was no need to replace the tail lamps. I thought about replacing the blinker light because it has a normal bulb in it, but I decided not to do it because the blinker relay seems to be built into the meter and it would be complicated to change it to LED. This time, I decided to replace the Headlight Bulb and the Position Lamp with LEDs, and for the Headlight, I chose this product, which was the cheapest among the Sphere Light products.
The replacement work was as simple as removing the headlight cowl and replacing the valve with the original one, and since the valve is compact, there were no problems with installation.
As for the feeling of use, the light is bright enough and feels very bright, probably because the light is whiter. I was able to drive safely at night. I was not bothered by the dispersion of the light. Unfortunately, there was not enough of an energy saving effect that I could really feel.
Compared to when we replaced the LEDValve on our ZRX1100 a few years ago, low-cost products are now on the market, and the hurdle for replacement has gone down. If you are concerned about the brightness of your lights, we recommend replacing them with LEDs.
View detail
Thin, lightweight, compact, easy to carry, and safe to carry
It is thin, lightweight, and very compact when folded, making it a must-have when I go out. It is very useful from spring to fall when the temperature difference is very large, such as when it is cold in the morning but hot during the day, or in summer when you are in a high altitude and the temperature is low, or when you encounter chilly conditions such as fog. In winter, it is good to have one more layer when you don't want to be overdressed but are a little worried about warmth.
It is more of an Emergency product, and if you expect to wear it in the inner room, the texture and design are like this, but the performance is sufficient for your needs.
Actually, I have been using a collarless version called "YKM-212" by Yamashiro before I bought this one. I bought this one because it is more compact when folded up, and this one with a hood seems to have good windproofing properties around the neck.
On the other hand, this model with Hood is designed for outer wear as well.
The Level is not a good place to stay in Parenthesis, but it is not embarrassing to take off your jacket and walk around during a break.
There are many thin, windproof innerwear products of this type, but I think that Yamashiro's silayed Nylon is the thinnest, lightest, softest, and most compact. I think it is the thinnest, lightest, softest and most compact. It is a recommendation for those who want to keep their luggage to a minimum. However, the price of this Hooded bag is a bit expensive. (List price) I would not say that it is a bit cosy.
Sorry WeBig, but if it's the lowest price sold at another Site, the cosmetics are good.
View detail