Reviews
Fits: YAMAHA , YAMAHA MT-07
Quality is good, but may be difficult to match.
I bought this to replace the bar end mirror on my xsr900, and although the gap at the bar end is wider than the OEM product, I had no choice but to install their bar end mirror.
That is the only thing that is a little unsatisfactory. Other than that, the construction is satisfactory.
View detail
Fits: HONDA FTR, HONDA FTR, HONDA CB900, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA CBR400R Limited Edition, HONDA CBR400R, HONDA CBR250RR (ABS), HONDA CBR250R <ABS>., HONDA CBR250R <ABS>., HONDA CBR250RR, HONDA FTR, HONDA CBR250RR
Satisfactory.
Fork's oil leak, which had been neglected, was finally repaired.
It is not an OEM Product, but there is no problem.
And this is less expensive.
View detail
Fits: Others
The colors match...?
I thought it would fit the current Kawasaki green better than OEMSilver.
I thought it would fit though with the way the sun hits it.
It is more subtle than OEM.
View detail
scratch-resistant
It is purchased for use in fixing areas where you don't want to put scratches, vibration, and Cushioning fixation areas.
Reasonable price, Quantity:1 Set of 4pcs. so it is helpful for periodic replacement.
View detail
Plug cap
I wanted Red but it was out of stock. View detail
These are parts that are recommended to be replaced periodically rather than becoming a troublemaker due to motorcycle malfunctions.
The story of the phenomenon to the replacement of parts
When I was riding in the city, Stop and go repeatedly in winter, the temperature of the water temperature gauge exploded.
Normally, the temperature would start at 100°C and then rise to 105°C with the cooling fan running, but the temperature has now hit 110°C. The cooling system warning lamp comes on... I don't understand! Finally, the warning lamp for the cooling system comes on... I don't understand why!
Cool-down at normal speed with running wind, warning Lamp off, temperature suddenly drops below 100°C, and cooling fan stops.
When waiting at a traffic light, the water temperature gauge rises and exceeds 100°C!
Later, upon inspection, the coolant reserver tank was replenished to the upperLevel based on its depletion.
The next day, I found some kind of liquid leaking from the bottom of my parked Motorcycle! The next day, we found some kind of liquid leaking from the bottom of the parked motorcycle!
It did not look or feel sticky like oil, it did not smell like volatile organic compounds, and it felt watery…, so I suspected it was coolant!
Not a leak from the Oil pan? I guessed it is probably draining from the Overflow Pipe.
I couldn't be sure because I haven't seen the phenomenon….
Every so often, the stain under the Motorcycle, which was left on the bicycle parking lot, evaporated or disappeared without a trace.
A few days later, we see the same phenomenon again.
Even though the Motorcycle is not running, it is leaking, isn't it? Is it a mystery in your head?
I sought out what I could do on my own and arrived at, Radiator cap This is an exchange of
[How is it used?
I bought an inexpensive Other Brand Product because I don't think it has been replaced since Motorcycle purchase.
Was the one you received as per Image?
The item was exactly as shown in the picture.
Was the installation difficult?
Only remove and install the panel on the Right Side of the Front.
I wonder if it is an individual difference of the Radiator cap, but when I install it and turn it, it is so hard that I cannot turn it without using a tool.
How was your experience with it?
Compared to OEM products, other brand products are cheaper, but the quality and materials of the products are cheaper.
[Included Parts:were they on?
There was nothing in particular
[Was there anything that disappointed you?
The point where installation could not be done easily.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Instruction manuals are available for reference, such as no service manuals.
Might be difficult without a certain level of knowledge and skill?
View detail
Fits: HONDA XR230 Motard (MOTARD), HONDA XR230 Motard (MOTARD), HONDA XR230, HONDA XR230, HONDA XR230, HONDA SL230, HONDA SL230, HONDA SL230, HONDA SL230, HONDA SL230, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR, HONDA FTR
Finally changed it.
I had been thinking about replacing it but had put it off, but finally replaced it.
Perhaps it will be effective in a new way.
View detail
Fits: Others
EDR-21Gα
It took me a long time to put Wiring together nicely. View detail
As a test
PlasticCleaner, I bought it to try it out because it seemed to have good reviews. The price is not that high, but the quantity is not too much.
It seems to be good for some Small scratches and dirt removal.
View detail
Fits: HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D2, HONDA CRF1000D2, HONDA ADV150
Fixed
I purchased this product to replace the existing Tail Lamp with a new one because it was badly rusted.
It was helpful that the product was sold under the same HondaOEM Product as the installed product.
View detail
Fits: HONDA C125, HONDA C125, HONDA C125, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500
Fixing Screw
I bought it to fix the Tail lampFixing Screw on the Rear because it was missing.
HondaOEM and the price was low, so it was very helpful.
View detail
Fits: HONDA C125, HONDA C125, HONDA CB1100, HONDA CB1100N, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA NCW50, HONDA PCX150, HONDA PCX150, HONDA PCX150
OEM Product, so no problem.
Used in Overhaul of Front fork.
Other Brand Product would have been fine, but the price was almost the same.
Purchase this OEM Product.
There is no problem.
View detail
Fits: HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA XR70R A, HONDA XR70R A, HONDA XR80R A, HONDA XR80R A, HONDA XR80R A, HONDA XR70R A, HONDA XR100R A, HONDA XR100R A
Cowl fixed
I purchased this bolt to replace the left side fixed bolt, which was rusted and old.
It was helpful to be able to sell and purchase the product through HondaOEM Product.
View detail
Fits: HONDA CB1100, HONDA CB1100N, HONDA CB1100, HONDA CB1100, HONDA CB1100S
Replace with new one
The mounting collar of the footpeg section was old and was purchased to be replaced with a new one.
It is helpful to be able to purchase the same Honda OEM product as the one installed.
View detail
Good
Adaptations had to be made so that the front lights could flash intermittentlyAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
About the Brake Reservoir Tank
The included Instruction Manual does not provide detailed instructions for replacing the bracket on the brake reservoir tank, so you will need to work with it in mind. The installation is not so easy as to fit easily and effectively, but the alignment of the screw holes with the body is not easy, and I feel that it is for those who are familiar with the work or those who have learned enough beforehand.
Even after the bracket replacement, the Cowl is still in a position where it seems to touch the Limit and I am not sure if this is correct.
The overall look and color is nice and comfortable at all.
View detail
Thin and nice
The thinness of the fabric is just right for a summer parka. View detail
pleasant color
Wallet, used to hold a smartphone.
I wanted to put my wallet and phone separately, but the outer zipper compartment was too narrow and I gave up.
Too tapered to fit things in to make you laugh. w
The belt section was also not convenient, so it was modified to fit through the belt of the pants.
View detail
Fits: SUZUKI Zixer 250, YAMAHA Cygnus X125SR FI, YAMAHA Cygnus X, YAMAHA Majesty S, SUZUKI Zixer 250, YAMAHA BW'S125, YAMAHA BW'S125X, SUZUKI Zixer 150, SUZUKI SF250, SUZUKI Gixxer 250, YAMAHA MAJESTYS, YAMAHA BW'S125, SUZUKI SF250, SUZUKI Gixxer 250, SUZUKI Gixxer 150., YAMAHA BW'S125X, YAMAHA CYGNUS X125SR FI, YAMAHA CYGNUS X, SUZUKI V STROM 250SX, YAMAHA MAJESTY S
OEM same etc. Brake Pads.
[How is it used?
I used it on a CYGNUSX, Type 5 Rear brake for commuting.
I use it on weekdays in sunshine, rain or snow, so this will be an imprementation with some use.
How was your experience with it?
The first time I used Red Pad was more than 10 years ago, I used it on the front of my CB400SF and I remember that I could not stop at all on a mountain pass. (LOL)
Since it is a Semi Metal Pad, it is the same grade as the OEM Pad, although in the case of CYGNUS, the Red Pad has a slightly higher Material Grade.
If you are a flyer or a firm Brake user, using it for Front will definitely not be enough.
If you are daytonapad, don't hesitate to use Sintered's Golden.
This time I used it on my CYGNUS Rear for commuting and it works good and Fee Ring is good.
How did it compare to other products?
Since this is a replacement from OEMPad, it is an OEM comparison, but the efficacy is almost the same as OEM.
I wonder if Red Pad works a little better?
Control is almost the same.
[Points to note]
The CYGNUSX5 type rear caliper can be attached and detached without removing the swing arm, but the CYGNUSX5 type rear caliper can be attached and detached without removing the swing arm,
I had a little trouble getting it to fit, so it might be easier to remove what can be removed without getting side-tracked.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
For a slight change in position
[How is it used?
To improve posture
Was the one you received as per Image?
Well, it's Handlebar.
Image
Was the installation difficult?
It has already been drilled for switches and other devices,
If you have experience in Oil replacement, I think you can pimp it out.
How was your experience with it?
It fit my physique.
[Was there anything that disappointed you?
Cable replacement is unnecessary. but I have the impression that it is quite tight and there is no room.
I think you would need to change the handling if necessary,
It may not be easy with W wiring.
View detail