Reviews
Volume control
[How is it used?
The volume of the external exhaust system that came with the used car when I bought it was too loud,
After Fire was also available at the same time, so it was purchased for exhaust adjustment purposes.
Was the one you received as per Image?
The size error was very small, and it was possible to mount the unit on a pontoon.
However, in our case, it will be installed in the exhaust pipe side of the exhaust system,
Drilling + Rivet fixation.
Was the installation difficult?
In the case of our vehicle, the exhaust system was inserted into the exhaust pipe,
The fact that we could not bolt on was something we could have anticipated,
Also, I had all the necessary tools on hand for processing,
It wasn't a difficult task.
We have an O2 sensor attached to the exhaust pipe on our vehicle,
It was also necessary to machine the contact points with a hole saw.
How was your experience with it?
I was able to reduce the volume from the original explosions,
For starting up (when cold), the volume is still too loud to be noticed in residential areas,
Once the Engine is started, it is ready to go.
[Included Parts:were they on?
Quantity:I bought 2pcs, but one of them had a bolt nut that came off,
It was playing in the bag.
However, it is not visible once it is installed,
I'm not talking about the scratches.
[Was there anything that disappointed you?
none in particular
Other items that would be helpful
At the very least, measure the inside diameter of the piping at the planned installation location before purchasing.
For those who intend to install the product by themselves, some manufacturing errors should also be taken into account,
It is advisable to have some processing tools and liquid gas available.
View detail
ZETA X3 Protector
I installed the AdventureArmor Handguard and purchased the Protector from the same ZETA.
Although I was not sure if I wanted to go with the XC, which is a bit larger, I was happy with the X3 because it was a small motorcycle to which I would install it.
The Size is good for those who are OK as long as they do not get hit on the fingers by flying rocks or hard insects while driving, because it is Small for wind protection.
The Master cylinder guard, removable with Screw, was also a simple but interesting GuiMick.
Four bolts are also included, making it easy to install on vehicles that already have a hand guard installed.
The color White can be Blue-ish or Green-ish. I saw a Review that said
The color of the one I received was what can only be described as White when viewed indoors or in the sun.
Perhaps there is a slight difference depending on the production lot.
View detail
Fits: SUZUKI TL1000R, SUZUKI SV1000S, SUZUKI SV1000, SUZUKI GSX1400, SUZUKI GSX1400Z, SUZUKI GSX1400, SUZUKI GSX1300R Hayabusa, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000, SUZUKI BANDIT1250F, SUZUKI BANDIT1250
rumor that appears to be quite true (rumour)
Replacement from FoldingLever in U Canaya.
The Kanaya Lever itself is a good one, but I replaced it because it had a fall damage since I bought the body and I did not like the Straight shape very much.
In comparison to Kanaya Lever,
The gentle bend at the base of the lever allows for more freedom in where you place your fingers.
As sung in the advertisement, the lever is gently curved so that it is soft to the touch when you hold it.
Both Levers are about the same thickness.
It was like that.
As the previous reputation suggests, I think the feature of the Largeest is the gentleness of touch when you hold it.
It is truly a lever for city driving and touring.
Those who want a Solid Touch or Sporty feel will not meet with many people, so the Straight shape is better.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R-900R, KAWASAKI GPZ750R
Ideal for Wound and Crack Hiding
Material of this Manufacturer:This was my first purchase of Carbon products and I am very satisfied with the quality.
First of all, it may be a bad point, or perhaps it is unavoidable due to the nature of the material, but you should not expect the fitting to fit the side cover exactly as if it were OEM.
It's not bad, but when you match one point of chili to another point of chili, the other point may not match, or there are parts where there is inevitably a gap when laminating with Double-sided Tape, … Level is not a concern if you move a little away from the car body.
The first good point is that it looks cool.
This is the best way to hide NINJA's unique side cover cracks.
Our Side cover also had a cracked One Side, but it was hidden by Beauty.
The Instruction Manual was also in color and the content was very clear and helpful.
And the warranty is generous even for such a small product!
De Fault comes with a one-year warranty, which shows A-TECH's commitment to manufacturing.
In the future, if Material:I wanted to make A-TECH my first choice when looking for Carbon products.
View detail
Simple is good.
Installation is very easy as it is fixed with a tie band, but I am concerned that it may move in the future as the tightness is weak.
I installed it on my OHLINS front fork and I like the simplicity of it.
There are other, more expensive ones out there, but I think this one will suffice.
View detail
Price is high, but texture is satisfactory
I chose this one because it is OEMOption. The capacity is larger than I expected, and I feel that a man can go for one night and two days with enough room to spare. The price is quite high, but when I tried it, I was satisfied with the quality and finish of the Large bag. However, there are no carrying straps or handles, so you need to attach them separately. It would have been better if they had attached a handle, but overall, I am satisfied. View detail
Fits: Others High ace200 series (general)
Color is perfect.
The paint was painted with the same color number as the OEM, so the colors matched perfectly and there was no discrepancy at a quick glance.
But the paint on this product is too good to be different from the rest of the product if you look closely.
To put it simply and to the extreme, the paint on the Manufacturer is light and tangerine, whereas this product is smooth, which makes a difference in the reflection of the scenery.
The reflection of this product is definitely more beautiful (laughs).
I thought the painted surface of a commercial vehicle was like this, so I felt that the beautifully painted surface was a turn-off.
I just put it on and don't know how durable it is, so I'll give it 3 stars for now.
However, I am glad to have replaced the Guts Mirror because it looks good and is no longer a nuisance in the car wash machine, etc.
View detail
Fits: HONDA CB400SS, HONDA CBR400F, HONDA CBX400F, HONDA CBX400F, HONDA GB400, HONDA REBEL, HONDA REBEL, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB, HONDA CB400SF HYPER VTEC Revo, TRIUMPH STREET TRIPLE, TRIUMPH BONNEVILE, TRIUMPH SPEED TRIPLE S, MV AGUSTA BRUTALE750S, DUCATI M400S, DUCATI M400METALLIC, DUCATI M400DARK, DUCATI M400DARK, DUCATI M400
etc., etc., etc., etc., etc., etc., etc., etc. (p∀p) aha!
[How is it used?
After about 2 years of use, my Cover finally tore and was no longer able to withstand normal use, so I decided to purchase one.
Was the one you received as per Image?
It was just as in the Image! Thanks for the heat resistant Seat!
How was your experience with it?
It is also good in the rain without letting it through properly!
[Points to note]
I have used Seats in a variety of price ranges, and have concluded that Balance is good for use in uncovered Blue Sky parking, replacing a few thousand yen price range every few years.
Elastic band is used to keep the Seat from flipping up in high winds.
How did it compare to other products?
DAYTONA is one of the manufacturers we trust, and they also sell Garage.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
The holes for the front and rear tire locks are also good. I have never used it (laugh).
View detail
Fits: KAWASAKI KDX220SR, KAWASAKI KLX250SR, KAWASAKI KDX220SR, KAWASAKI KLX250SR, KAWASAKI KDX250SR, KAWASAKI KDX250SR, HONDA XR250, HONDA XR250, HONDA XR250, HONDA XR250 BAJA, HONDA XR250, HONDA XR250 BAJA, HONDA XR250, HONDA XR250 BAJA, HONDA XR250 BAJA, HONDA XR250, HONDA XR250 BAJA, HONDA XR250, HONDA CRM250AR, HONDA XR250 BAJA
Excellent as a TRAILTire!
I have been using it for about 6 months. First of all, On can be driven normally as long as you don't tilt it too much. On the highway, it is normally durable up to about 100km. But the Life is reduced a lot, so I think it will last longer if you don't run at a high speed unnecessarily. Off is the most important thing, but when it becomes Muddy, it is clogged with mud and cannot be run, but it can be run on gravel riverbeds, even if they are wet with water. I feel that forest roads can be run better on stony, gullied terrain than on areas with a lot of red dirt. I think this Tire is suitable for those who explore forest roads on their own. View detail
Not available for 2023GROM
I purchased this product because it was indicated that it could be installed on a 2023 GROM, but the type of the Air Cleaner Box has changed from the previous model and it cannot be installed immediately.
There is an intake on the Engine side at the far end, which is inaccessible. It might be possible to install the unit if all the ducts were loosened and removed, but I decided not to do so because it would take too much time.
It was a waste of time, so I installed it in the intake of the box in front of the Air Filter.
Does it seem to be effective from where it is installed? Or not?
I would like to believe that there is.
View detail
Fits: APRILIA RSV4, HONDA CBR600RR, KAWASAKI ZX-25R, SUZUKI GSX-R125, SUZUKI GSX-R150, HONDA CBR1000RR-R, KAWASAKI ZX-10R, KAWASAKI ZX-4R, SUZUKI GSX-R150, YAMAHA YZF-R25, HONDA CBR1000RR, HONDA VFR400R, SUZUKI GSX-R125
Just the right height
Close to Type A at first Adjustable Clip On Handlebar (Duca Motorcycle, BSRA50) I had been using a handlebar with a "M" but the position of the handlebar was not quite right and I wanted to raise it another 20mm or so, and then I found this product.
I installed it and it is perfectly positioned and very easy to use.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA DAX125, HONDA SUPER CUB, HONDA CROSS CUB
Vibration Absorbing Lever
Installation took a lot of time and effort. (OEM Bar End cannot be removed). It also came with an Instruction Manual, but it was only a reference, so I ended up asking a motorcycle shop for it. I am satisfied with the result. I purchased the 8mm thick handlebar, and the vibration from the handlebar has been reduced, but now I am worried about the vibration from the footpeg. View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90 CM, HONDA SUPER CUB 90 DX, HONDA SUPER CUB 90 STD, HONDA SUPER CUB70 CM, HONDA SUPER CUB70 DX, HONDA SUPER CUB70 STD, HONDA CUB PRESS, HONDA SUPER CUB 50 CM, HONDA SUPER CUB 50 DX, HONDA SUPER CUB 50 STD
It will improve the ride and appearance.
[How is it used?
SUPER CUB I got used and cheap.
The SUPER CUB that we purchased was inexpensive, and the exterior of the SUPER CUB was sadly deteriorating over time...
A reliable Shop for such SUPER CUB Refresh! Tokyo Do. This time, we refresh the Rear shock, which had been in a soggy Rust condition.
The distributor is Tokyo-Do, but the manufacturer is YSS, which has become a MAJOR suspension manufacturer in Japan.
How was your experience with it?
The vehicle we acquired was a wrecked vehicle with a lot of mileage, so it was a simple matter to get a new one. Compare with OEM Product." The body of the car was squishy, but the movement of the body was crisp.
The included adjustment tool allows for 5 levels of pre-road adjustment, but in my case, the lowest factory setting was sufficient (I think the lowest setting is a little stiffer than OEMRear shock).
Another good point is that since the entire product is made of plating, it can be installed without any discomfort regardless of the color of the car body.
How did it compare to other products?
Several companies sell shocks in the same price range, but since this is the first time I have replaced the rear shock of my SUPER CUB with an Other Brand Product, I am not familiar with the MeritDemerit of each.
I wonder if there is no problem in coordinating with the car body color. I think so.
If you are interested in the behavior of the car when you drive on the circuit or push it to the limit, you may be more satisfied with the more expensive Rear shock.
[Points to note]
Not so much as a precaution, but to ensure safety during installation, to grease up moving parts, and to install with the proper torque, etc.?
This product is Ironware. The product is a plated product, so it can be enjoyed in a beautiful condition for a long time if you continue to take measures against rust, such as wax & coating, dehydration after driving in the rain or washing the car, etc.
Other items that would be helpful
The deciding factor in the purchase
A friend of mine who is a CUB friend was using this product (BodyPlating/SpringBlack) and gave it to me for a test ride because it looked good.
[How is it used?
I'm a city rider Main, and I'd like to take a slow touring to the north Large land by CUB someday, but it would be tiring........
【Included Parts:presence or absence】.
Rear shock absorberQuantity:Pair (for Left and Right) and a tool for pre-road adjustment are included in the package.
Also included was a YSS Decal and a brief instruction manual?
[ITEMS TO BUY TOGETHER
If you have a budget to spare, you can also use the Tokyo-Do handled Front Reinforced Sport Shock Original YSS and refresh both the front and rear for a more stable driving experience.
The Front is hidden and barely visible from the outside, but it is performance oriented.
Opinions and requests to Manufacturer.
The price is relatively affordable, and the product is easy to understand as a first step in Custom & Restore, so please continue the lineup.
View detail
Fits: YAMAHA YZ250, YAMAHA YZ125, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ250FX
Not yet installed...
It is thick and firm. I wonder if it needs some hang to stick. View detail
Fits: YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA YZ450FX
I purchased this product because I plan to replace the exterior.
I can't say for sure since I haven't received the exterior yet, but it looks solid, thick, and sturdy.
It seems to need some hang to paste, but I guess it's not a problem since forest roads and Enduro are Main.
View detail
Cost-effective, but requires processing
There is a process to make it like a plastic model.
The letters are attached one by one in Rose, so after folding the nails and taking out the BALI, they are framed in. This process was very enjoyable and had a Petit Custom feel to it.
When installing, the underside of the body interferes with the Fork Cramp, so modification is required.
I shaved more than 5mm at Grinder. (See photo)
Front looks better and I am happy with the low price and enjoyment of PetitCustom.
View detail
More vibration transmission from Pedal
Was the one you received as per Image?
Except for the tip and Protector part, they are soft and not tiring to wear.
I didn't mind getting off the Motorcycle and walking around.
I have heard that the zipper is hard, but I had no particular difficulty when putting on and taking off the shoes, so I think it should not be a problem unless you are very inefficient.
[How did you feel about the Fit?
My normal shoes are 27.5 and the same size 27.5 (43) fit perfectly.
The toe was just a little extra and the width was just right besides. (I thought they would be too narrow.)
The heel, ankle, and ankle area feel soft and wrapped on the inside.
I used to wear Alpinestars FASTER 3, but even though the size was Exactly, the toes were not thick enough and my thumbnail was held down, causing pain when I wore them for a long time, but these had enough space and did not hurt.
How was your experience with it?
This is a comparison with Alpinestars' FASTER 3.
The soles seem to be a little thicker than usual. (Knee grip position is just a little bit higher than usual. (Knee grip position is just a little bit higher than usual.)
Grip power has definitely increased and I can move my body with ease. (Although FASTER 3 also grips well.)
If you are running, you can feel the wind around your ankles. (Other than that, they are not mesh, so they are the same as regular shoes.)
It is easy to move the ankle, and it is easy to do Rear brake and Shift change.
The vibration of the Engine transmitted from the Pedal comes directly to my feet. It usually makes my feet numb. (I guess I have to use cushiony insoles or socks to prevent this.)
Motorcycle with little vibration would not be a problem.
[Was there anything that disappointed you?
The Elastic band like thing on the back of the foot looks a little bit yucky. It looks like it will deteriorate if exposed to sunlight for a long time.
What are the specs of the product, such as protector?
I think almost all of them are like Protector. It seems to be the first problem for driving on public roads.
The inside is soft and comfortable without feeling Protector.
View detail
It can be used properly.
The texture does not feel cheap. It's also strong and stable.
When used in conjunction with the Ladder rail and placed on the Transporter, it can also be used properly as a step ladder.
STANDDecal is also easy to customize because of the variety.
View detail
Accuracy...
The hole where the pin goes in was distorted and needed to be scraped with a file. It is not a large problem with a little work, but if you don't have a file, you cannot install it. This is why the quality rating is so low. View detail
Installed on a NC65 2024
Installed on a NC65 2024.
It is not in the compatible models, but there was no problem.
The 2022 and 2024 models are Large sturdy because they are the same Radiator.
View detail