Reviews
can not use
Rivet is weak in Aluminum
The plate thickness can not be tightened up properly even within the range,
Broken with a single shot.
Quantity : 1 Set of 10pcs. Although I purchased it, even if I change the combination, Quantity : Only 2 sets could be used properly, so it will not be possible to do anything.
View detail
For acosat ...
I saw this impule and bought it for CBR 1000 RR, SC 59, AOCOSAT Lever, but Switch function did not work. (Initial failure?) I do not know.. I ordered and replaced Akosat 's one soon. And making a terminal is complicated. be careful.
View detail
Fits: YAMAHA tricity, YAMAHA Tricity155, YAMAHA Tricity155
It may be better not to exchange
Custom Customers and people who can do something by themselves are good, but it would be better not for ordinary people to hand out.
Although the exchange is not a large work, the problem is the Wiring process, the Wiring and Sockets hidden in the Cover are rolled out, so we are suffering from the scattering of the Wiring while doing the Waterproof process and can not clean it neatly.
Apart from this and Handlebar Extension of Waterproof connecting Coupler and Coupler (Or Adapter) You must release WiringKit
View detail
Fits: YAMAHA WR250 R, YAMAHA WR250 X
WR250R / For X, + Quantity : Quantity of 2pc : 31pcs. Please do it!
Because it is often used in off, I maintain regularly, but since I saw several Rol of Bolt kind on the outer circumference of Crankcase I tried to purchase it for Dress-up & weight reduction.
WR250R / The set for X is a total of 29, Left can cover all of the circumference of Case and all three of the outer circumference of Chain cover, but this set can be covered with this set, but Right Side is incomplete halfway!
Right Side's case can be exchanged for all circumferences. Just YAMAHA stamped Material : PlasticCover's lower Quantity : There is no 2pc.
OthersWater pump There are not 4 outer circumference and 3 Oil Filter Cover, so, as a result, Right Side is very incomplete.
Because it makes the Bolt set close to 10,000 yen, so if we go to this point, even if the price goes up a bit, the Quantity : I think that it would be better if you only include 2pc in the Set.
Also, Included Parts : Although hexagonal Wrench is also included, there are also places that can not be used in the attached Wrench.
→ Size 4 HEXSocket is required.
It is the point that I feel better at first, but Bolt's longest M6 resin Cover 3 / The 45 mm Bolt obviously has different colors. It is very anxious because it feels like Anodized does not ride cleanly and it looks like Black...
By the way ... Aluminum Bolt 29 Weight of 99 grams in this bag, the weight of 26 OEMBolt I removed, this was also 230 g in bags.
Even if we actually replace 29 pieces, it will change only about 150 g, and the appearance is very halfway.
Although I bought many parts for single-car parts only for self-satisfaction, unfortunately it was a part that can not be even self-satisfied this time.
For those who are planning to purchase on WR ... thinking and thinking, I will write a strict opinion, but since it is an honest comment I think that you can refer to it.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
A bit sorry - - -
It was just a good product such as price and Large Kimono, but the item that arrived was long-term stock or was dirty.
Because I did not want to install it dirty, it wiped lightly with a dry cloth. Polo Polo and Plating come off Peeling off.
Besides, because my friend asked me the same item, Quantity : 2pc. Buy and buy Quantity : 2pc. Plating is dirty as well as Set - - -
It is surprising that there are such products in this era.
View detail
Fits: KAWASAKI GPX400R, KAWASAKI KZ750H LTD 750 - All, HONDA CB500F, KAWASAKI ZN1100B LTD 1100 - All, KAWASAKI ZN1100B LTD 1100 - All, KAWASAKI Z650SR 650 - All, KAWASAKI Z650SR 650 - All, KAWASAKI Z650SR 650 - All, KAWASAKI Z550F 550 - All, KAWASAKI Z550F 550 - All, KAWASAKI Z550F 550 - All, KAWASAKI Z550F 550 - All, KAWASAKI Z440 LTD 440 - All, KAWASAKI Z440 LTD 440 - All, KAWASAKI Z440 LTD 440 - All, KAWASAKI Z440 LTD 440 - All, KAWASAKI Z440 LTD 440 - All, KAWASAKI Z440 LTD 440 - All, KAWASAKI Z440 440 - All, KAWASAKI Z440 440 - All
I show it in the field of viewing compatible models, but it does not fit
YAMAHA XJR 1300 2001 type
5 EAP OEM Parts Number is 36 Y - 13441 - 00
I purchased this KN - 401 because it is written as XJR 1300 98 - 11 in the field of viewing compatible models, but the diameter is the same as the old parts but the height is as short as 2 mm Meter, the included OLINK is one size larger There was not.
Again checking NTB : Oil Filter quotient Product No. : It was written as OEM Parts Number No. 36 Y - 13441 - 00 in the conforming model column of UO - 4004.
I should have bought this - - - We discarded this KN - 401.
If the notation of the compatible model column is OEM Parts Number number, I wanted this or a clear notation.
View detail
No good
Purchased because it is cheap.
I installed and went to Touring but 30 kilometers already had a crack in Rubber's Material.
Far away from Long touring PetitTwo is impossible.
Finally in a miserable form. If you are considering purchasing this Parts, please imagine that this Parts will be broken while driving!
Life thing is bigger than the gold amount !!
View detail
Fits: Others V46 : TRK46/33 : B33NMK : B47 : E470 : E450 : E370 : E340 : B33NML : E300N2 : E260 : E230 : V35 : B36N
Quantity out of 3 : 2pc. Set continued defective item
Refer to the above for the defective condition
I will add a point that I felt incongruous when I arrived at the item.
Last time was Material : Plastic BristerCase was properly sealed with commercial Large Stapler.
This time it arrived with forcibly stopped by Stapler for home. (One Side of the needle is broken or bent)
Several holes were opened, and it seemed like an amateur tightened back.
Did the defective item returned item mix in the favorite item ???
View detail
Fits: Others V46 : TRK46/33 : B33NMK : B47 : E470 : E450 : E370 : E340 : B33NML : E300N2 : E260 : E230 : V35 : B36N
Quantity out of 3 : 2pc. Set is defective
Quantity out of 3 : 2pc. Set was a defective item.
Cylinder was forcibly screwed into Color with poor precision and it was packed in a Small bag and delivered.
Since it does not rotate as it is, it can not be used, and it was hard to extract Cylinder from Color.
Polished inside of Color, finally the state where Cylinder turns
There is no meaning of the inner paint for rust inhibition, I do not feel like continuing to use.
It is thought that overlooking the failure at the time of setting to Color or putting it in a Small bag is malicious.
Also, at the time of purchase last time, all six keys were the same key as in the product introduction image, but this time three were spare keys for iron bare.
I would like to return Gold..
View detail
Picture and color are different
It was a red Red Anodized, but it was Red that was thin like sunburn.
It may be wide and the width of the hexagon may be wide, but I can not satisfy the shading color.
View detail
Quantity : 1 Set of 2pcs. It is not!
Certainly the quantity is 1 pc. And is written. I did not check well, but I am afraid, but clearly Quantity : 1 Set of 2pcs. I thought that it was. If it is at the shop, there is no such thing, but caution is necessary for mail-order sales where products can not be seen. I also want to write a note at persistent level even by Wei Big. View detail
Sprocket not stuck
Please be careful as items of Amazon and other stores have Sprocket stops attached to them.
It is said that it is the same construction as OEM, but it does not fit if it does not fit at the time of installation.
Although it is the same price Wes Big seems to be pulled out of the container and sold.
Inquiries
> We are attaching to the necessary Sprocket, so please rest assured. Answer meaning unknown - - -
On the telephone at Wes Big side I heard surrounding laughing sounds and atmosphere of bad mood as opposed to the apology of the person in charge and there was a temperature difference and no words came out - - -.
View detail
Fits: KAWASAKI ZZR400
Well
PositionIndicatorBody is okay, but the position of Wiring of Harness by car model was wrong and it did not work at all. Although the Wiring color described in the Instruction Manual matches ... I opened it and I got a Wiring diagram so I changed the Wiring of the Connector myself. View detail
Disappointed with this product, at the first disassembly, with the special key to disassemble the cheek, one of the two holes snapped ... First and last time I chose this brand. Otherwise for the site, very good customer service, very present to help fa
Disappointed with this product, at the first disassembly, with the special key to disassemble the cheek, one of the two holes snapped ... First and last time I chose this brand. Otherwise for the site, very good customer service, very present to help make the best choice for our scooter (HONDA PCX 125 model 2011) I would order again on this site with my eyes closed. Disappointed with this product, the first dismantling, with the special wrench to remove the play, one of two holes snapped ... First and last time I chose this brand. If not in terms of the site, great customer service, very present help to make the best choice for our scooter (Honda PCX 125 model 2011) Will order again on this site eyes closed. View detail
Poorly made. Vibrations caused the plastic outer enclosure to break after only a couple months of riding. Do yourself a favor and spend a little extra on one of the other air filters.
Poorly made. Vibrations caused the plastic outer enclosure to break after only a couple months of riding. Do yourself a favor and spend a little extra on one of the other air filters. View detail
Is not this a defective product?
Purchased for fixing Slip-on Silencer of 100 φ.
I bought this cheapest item.
Some error of about 2 mm in diameter was on my mind.
However, the actual product is large enough to surpass it and it can not be said that it is very 100 φ.
Length missing from the circumference how much 15 mm.
It is too cruel..
It is probably 100 mm without an Elastic band, but it is not enough if you pinch the Elastic band.
Is not this a defective product?
I'm thinking how to fill this 15 mm.
View detail
Defective item?
I bought Normal Thread Screw 10 mm, but it does not enter one side. I can not replace it on the way.. There may be individual differences.
I am disappointed. Standard's Screw, Quantity : Pair (for Left and Right) I do not get misunderstood because it enters in a positive 10 mm.
View detail
Make changes as soon as possible
Purchase PJ-08 because Head part is movable.
Items arrived are both boxes and Jack Body's Label PJ-08.
However, Head does not seem to move.
Calling webike by telephone also hardly connects.
There is no reply of e-mail.
I got inquired directly from KTC, it was out of print.
The movable type is now not in Lineup.
View detail
It's the worst.
We ordered and installed YAMAHA BW, S with Motorcycle shop, but in 2 weeks welded parts of Body's Silencer and Exhaust pipe were removed and completely separated.
Actually traveled was about 10 days.
The price is reasonable and the sounds are reasonable, but it will not be talked about making it like this soon will be broken.
Motorcycle shop repair to Manufacturer via wholesaler etc. etc. It seems that I am inquiring about but I've been there for more than a week but I do not see any answers ....
Even if there are rare things like this, there may not be any way but after that the response is too bad.
We recommend you something of Manufacturer that is somewhat expensive but reliable.
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
Cheap reason
GPZ 900 R installed in A 11 Tank and Seat will be available for about 1 centimeter free cheaply I think there is a reason for that as much as possible Although it is somehow Level but amateurs think that it is better not to put out hands
I received returned goods, so I returned it and got the SED of the STD to be replaced by the dealer There was also a better finish there
View detail