Reviews
Fits: BMW R 75/7, BMW R 60T, BMW R 60/7, BMW R 90S, BMW R 90/6, BMW R 75/6, BMW R 60/6, BMW R 100RT till 1990, BMW R 100S, BMW R 100CS, BMW R 100T, BMW R 100, BMW R 100/7, BMW R 80TS, BMW R 80TN, BMW R 80RT, BMW R 80N, BMW R 80/7S, BMW R 80, BMW R 80/7N
If it deteriorates, replace it!
[How is it used?
Used on BMW R100 Twin suspension.
How was your experience with it?
The rubber had deteriorated considerably and was falling apart, so we replaced it. The new rubber was taut and of reliable quality.
[Points to note]
If you can buy both, purchase quantity 2!
View detail
Fits: BMW R 100R, BMW R 80R, BMW R 80GS PD, BMW R 100GS PD, BMW R 100GS, BMW R 65GS, BMW Paralever Modelle R 80GS, BMW R 80GS Basic Monolever Modelle R 65, BMW R 75/7, BMW R 60/7, BMW R 80ST, BMW R 65, BMW R 65LS, BMW R 80G/S, BMW R 45, BMW R 100CS, BMW R 90S, BMW R 90/6, BMW R 75/6, BMW R 60/6
To prevent oil leakage! After installing the new Gasket, the oil leak was completely cured.
[How is it used?
Can be used with BMW R100 series. It should work with most 2V OHVs of this generation.
How was your experience with it?
The hard material can be tightened with a screw to firmly seal without oil leakage.
View detail
Fits: BMW K 1200GT, BMW K 1200LT, BMW K 1200RS, BMW K 1100LT, BMW K 1100RS, BMW K 100RS4V, BMW K1, BMW K 100LT, BMW K 100RT, BMW K 100/2, BMW K 100RS, BMW K 100, BMW K 75S, BMW K 75RT, BMW K 75C, BMW K 75/2, BMW R 100RMystic R8 0GS Basic Paralever K 75, BMW R 80R Mystic R 100R, BMW R 80R, BMW R 80GS PD
It was scrap iron.
The BMW OEM drain plugs screwed right into the new oil pan without any pain to the female screws.
The Oil Drain Plug of SIEBENROCK does not function as a Screw because the Screw threads near the tip of the Screw have become dull.
Material with iron Drain plug:It is Garbage that exists to destroy Aluminum's Oil pan.
The magnet that comes with the Drain plug is also weak and does not have the necessary capacity.
There was no M18P1.5 dice, so I installed a screw cutting byte on the lathe and modified the tip of the screw section. The tip can be screwed in, but the turning force becomes heavy from the middle of the screw and the accuracy of the screw pitch seems poor.
I am not considering returning it because I post-processed it to make my own modifications to the product, but it was Garbage that had to be thrown away.
View detail
Fits: BMW K 1200GT, BMW K 1200LT, BMW K 1200RS, BMW K 1100LT, BMW K 1100RS, BMW K 100RS4V, BMW K1, BMW K 100LT, BMW K 100RT, BMW K 100/2, BMW K 100RS, BMW K 100, BMW K 75S, BMW K 75RT, BMW K 75C, BMW K 75/2, BMW R 100RMystic R8 0GS Basic Paralever K 75, BMW R 80R Mystic R 100R, BMW R 80R, BMW R 80GS PD
Not compatible with K1200RSFirst Model Type.
Not compatible with K1200RSFirst Model Type (1998). View detail
![HIFLOFILTRO Oil Filter 161 BMW [Oil Filter HF161 BMW] [Directly Imported From Europe]](https://img.webike-cdn.net/catalogue/images/105620/1000491_1_TS.jpg)
Fits: BMW F 800 GS, BMW R 100 GS, BMW R 100 GS, BMW R 100 R, BMW R 100 RS, BMW R 100 RS, BMW R 100 RS, BMW R 100 RS, BMW R 100 RS, BMW R 100 RT, BMW R 100 RT, BMW R 100 RT, BMW R 45, BMW R 45 /N, BMW R 50 /5, BMW R 60 /7, BMW R 60 /7, BMW R 60 /7, BMW R 60 TIC, BMW R 65
No more or less, just a part that fulfills its role.
There are no performance issues when compared to OEMFilter.
Cost is cheap, but it takes a long time to arrive because it is imported, so I always buy 3 or 4 of these in bulk and use them.
I will post pictures of the replaced and new ones.
No strange crushing or tearing.
We will continue to use this product in the future.
View detail
Fits: BMW R 50/5, BMW R 60/5, BMW R 75/5, BMW R 60/6 Fits rear, BMW R 80GS, BMW R 80GS PD, BMW R 100GS, BMW R 100GS PD, BMW R 80GS Basic und R 80R, BMW R 80R Mystic, BMW R 100R, BMW R100R Mystic, BMW R 80R Classic, BMW R 100R Classic
That's what I'm talking about, WeBig!
I found a Single Item, but it was a Large Mortgage 40pcs Quantity.:The only way to get a set was to sell it as a Single Item, but with Webig, we were able to order it as a Single Item, which reduced the repair cost to the size of a Large item. This was very helpful. View detail
Fits: BMW R 100, BMW R 100/7, BMW R 80RT, BMW R 75/7, BMW R 60/7, BMW R 90S, BMW R 90/6, BMW R 75/6, BMW R 60/6, BMW R 75/5, BMW R 60/5, BMW R 50/5, BMW R 80, BMW R 80/7, BMW R 100RT, BMW R 100S, BMW R 100CS, BMW R 100RS
Can use
I used it on my R100RS.
No problem at all
View detail
Fits: BMW F 800 GS, BMW R 100 GS, BMW R 100 GS, BMW R 100 R, BMW R 100 RS, BMW R 100 RS, BMW R 100 RS, BMW R 100 RS, BMW R 100 RS, BMW R 100 RT, BMW R 100 RT, BMW R 100 RT, BMW R 45, BMW R 45 /N, BMW R 50 /5, BMW R 60 /7, BMW R 60 /7, BMW R 60 /7, BMW R 60 TIC, BMW R 65
It works fine
This is the first time I've used this one
The Oil may crush the Filter on some things, but it works fine on this one I could
The price is not much different from the OEM Filter, so you can decide for yourself which one to choose It is
View detail
Fits: BMW R 45S, BMW R 80R Mystic, BMW Paralever models R 80R, BMW Monolever models R 65, BMW R 100S, BMW R 100, BMW R 100/7, BMW R 100CS, BMW R 100T, BMW R 80ST, BMW R 45T, BMW R 80, BMW R 45, BMW R 100R Classic, BMW R 45N, BMW R 100R Mystic, BMW R 100R, BMW R 75/7, BMW R 60T, BMW R 60/7
Purchased as an OEM Product Discontinuance
OEMParts are Grip heaterSpec. only, STD Handlebar is manufactured Cancelled
This is the only item that fits the R100R You should The price is about the same as the OEM!
I thought that installation was Large sturdy as it is, but the Holder of Clutch Side The Throttle was Large sturdy I don't know if it is only my R100R. The balance weight of Others is a little rattling I used Vinyl Tape to adjust the thickness of the tape
The item is thickly plated and TUV certified, so I don't think it's a problem
View detail
Fits: BMW R90S 900 - All, BMW R90S 900 - All, BMW R90S 900 - All, BMW R90S 900 - All, BMW R90S 900 - All, BMW R90S 900 - All, BMW R90S 900 - All, BMW R90/6 900 - All, BMW R90S 900 - All, BMW R90/6 900 - All, BMW R90/6 900 - All, BMW R90/6 900 - All, BMW R65LS 650 - All, BMW R65LS 650 - All, BMW R65LS 650 - All, BMW R65LS 650 - All, BMW R65LS 650 - All, BMW R65LS 650 - All, BMW R65LS 650 - All, BMW R65LS 650 - All
It should not be used for BMW air cooling TWIN
BMW air cooled TWIN without Oil cooler Spec. It is supposed to be usable for, but I have tried using multiple, but already three were picking up when I took out. In addition, Filter Room Leaf is normal, but it seems to be this when using Reve Limit a cup (image). That is, the passing resistance to Mesh and the intensity of Element are not in agreement.
We, two more items left but we can not use it.
Do not buy this product for BMW air cooled TWIN.
* Can you recommend this product to friends and acquaintances? ⇒ NO - - - Can not Recommendation.
View detail
Fits: BMW R90S 900cc All, BMW R90S 900cc All, BMW R90S 900cc All, BMW R90S 900cc All, BMW R90S 900cc All, BMW R90S 900cc All, BMW R90S 900cc All, BMW R90S 900cc All, BMW R80ST 800cc All, BMW R80ST 800cc All, BMW R80ST 800cc All, BMW R80ST 800cc All, BMW R80ST 800cc All, BMW R80ST 800cc All, BMW R80ST 800cc All, BMW R80ST 800cc All, BMW R80ST 800cc All, BMW R80RT 800cc All, BMW R80RT 800cc All, BMW R80RT 800cc All
It should not be used for BMW air cooling TWIN
BMW air cooled TWIN without Oil cooler Spec. It is supposed to be usable for, but I have tried using multiple, but already three were picking up when I took out. In addition, Filter Room Leaf is normal, but it seems to be this when using Reve Limit a cup (image). That is, the passing resistance to Mesh and the intensity of Element are not in agreement.
We, two more items left but we can not use it.
Do not buy this product for BMW air cooled TWIN.
View detail