Reviews
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
good choice
I bought it after seeing a review that you often replace it with a set with Takegawa reinforced coil. I bought any color because it was hidden in a cowl, and I connected the ngk power cable with the Takegawa reinforced coil and installed it. I had to cut the length and install it, but I thought there would be some loss, so I just connected it. It starts up well and I think it's effective in output. Thank you. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, KAWASAKI Z125 PRO, KAWASAKI KX100, KAWASAKI KLX110L, SUZUKI TS50W, HONDA TLM50, HONDA NSR50, HONDA MONKEY BAJA, KTM 65 SX, APRILIA TUONO50, APRILIA RX6V, APRILIA MX, APRILIA 50RS, KAWASAKI KX85-II, KAWASAKI KX85, KAWASAKI KX80-II, KAWASAKI KX80
good chain
I planned to replace it because the pure chain is stretched so well. I bought it with a non-seal reinforcement chain because it's better to manage it than having an O-ring. It's definitely better to drive it and the gear tightness and chain are stretched. I think I can use it for a long time if I take care of the chain rub well. Thank you. View detail
Fits: SUZUKI DR-Z400, SUZUKI ST250, YAMAHA YB125, YAMAHA VOX, YAMAHA TW225, YAMAHA TW200, HONDA Smart Dio, HONDA CB1100, HONDA CB900, HONDA NC700X, HONDA XR250, HONDA CRM250, KAWASAKI ZRX400, SUZUKI ADDRESSV125 , SUZUKI ADDRESSV125 , SUZUKI ADDRESS110, SUZUKI ADDRESSV100 , SUZUKI LETS5 , HONDA X11, HONDA JOKER50
Mirror arrived cracked.
The Mirror arrived with a crack.
I didn't return it because I noticed it after I installed one of them.
The box is in the worst possible sticky condition.
I think Design is the best. For a properly managed operation.
I would like it mailed to me.
View detail
Fits: SUZUKI DF125, HONDA APE100, HONDA APE100 TypeD, HONDA APE50, HONDA APE50 DX, HONDA APE50 TypeD, HONDA BENLY CD125 T, HONDA BENLY CD90 , HONDA BENLY110, HONDA BENLY50S , HONDA BENLY50, HONDA BITE, HONDA BROAD, HONDA BROAD 90, HONDA CABINA, HONDA CABINA90, HONDA CB125 T, HONDA CBR125R, HONDA CBX125 F, HONDA CBX125 Custom
great greap
I liked these grips, they look like factory ones, they were delivered in 2 weeks, I’m very happy with the purchase, I will recommend them to friends ------------------------------ ---------------------------- I liked the vulture data, they looked like factory ones, delivered in 2 weeks, I am very pleased with the purchase, I will advise my friends Powered by Google Translator View detail
Fits: HONDA APE50, HONDA APE100, HONDA BROS, HONDA CB-1, HONDA CB1000SF, HONDA CB1100, HONDA CB250T, HONDA CB400SF, HONDA CB400SS, HONDA CB500FOUR, HONDA CB750, HONDA CB125, HONDA CB125T, HONDA FTR223, HONDA GB250, HONDA HORNET, HONDA JADE, HONDA SL230, HONDA SPADA, HONDA VRX400
the screen is good
I like that the clear screen is clean.
It bends well too.
It's nice that it's easy to install.
However, the screen cracks over time.
I don't know why.
However, the price is cheap so I can forgive it.
I hope the screen is not broken -------------------------------------------- --------------- The clear screen is clean. It is also good to bend. It is also easy to install. However, after time, the screen splits. I don't know why. But the price is cheap and you can forgive. I hope the screen won't break Powered by Google Translator
View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GSX400, SUZUKI ST250 E Type, SUZUKI ST250, SUZUKI RV200 VANVAN, SUZUKI GSR400, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ESTRELLARSCustom, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100
First Handlebar Replacement
[How is it used?
XJR400R (RH02J) I was looking for an external Handlebar to change the Spec. of the Pipe Handlebar of the
We chose this product based on Manufacturer, price, and fit information.
Was the one you received as per Image?
Good texture for the low price.
Was the installation difficult?
In my case, drilling was unnecessary because the previous owner had already removed the protrusion on the Switch side when he replaced it with an external Handlebar.
Therefore, installation was completed in about 30 minutes.
It is not that complicated and can be done with common tools.
However, the label with the part number, etc., does not peel off cleanly at all, which is frustrating. I finally gave up because it is not visible. (Lol)
How was your experience with it?
The Handlebar's texture is not cheap and has a nice feel to it.
I am satisfied with the Position as well as the Style to my liking.
[Included Parts:were they on?
HandlebarBody only.
[Was there anything that disappointed you?
The Bar End must be somewhat long because it is rather short for XJR.
【Review】
The quality is solid for the price and the satisfaction from the replacement is high.
There seems to be no problem with the fit itself, but I wonder if something longer by one Size would be better. I think it would be better to use a longer one.
View detail
Fits: HONDA MONKEY 125, HONDA NSF100, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO, YAMAHA YZ65, KAWASAKI KLX110L, KAWASAKI KX100, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z125 PRO, HONDA APE100, HONDA APE100 TypeD, HONDA C50 SUPER CUB 50 Custom, HONDA C50 SUPER CUB 50 Standard, HONDA C50 SUPER CUB 50 DELUXE, HONDA C50 SUPER CUB 50 BUSINESS, HONDA C70 SUPER CUB70, HONDA C90 SUPER CUB 90, HONDA CD90, HONDA CD90
Reliable Manufacturer◎Not too much gold color
[How is it used?
Installed on a JC75 Grom.
The custom is an external Full Exhaust System, Mukawa N-15 High Camshaft, i-map, and a mid to high speed Emphasis on Torque Light tuneSpec. with air cleaner processing.
At the same time, KITACO's Driven Sprocket (OEM 1T lowering) was introduced.
Was the one you received as per Image?
The gold color is beautiful and not too shiny, so it is not too obnoxious.
Was the installation difficult?
The maintenance stand I bought the other day did not fit and I had no choice but to ask the Shop to install it.
How was your experience with it?
The change was dramatic since we were replacing a Chain that had run 9,000 km in OEM and had been adjusted to the max.
I don't hear any rattling sound from the chain, and the response is Direct with no vibration or wobble. This Chain is said to be highly durable, so I will lubricate it frequently and keep it with me for a long time.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
When purchasing on Webike, the number of links can be specified in detail, so by checking the number of links on your motorcycle and buying the appropriate one, you will not need a chain tool. Also, when removing a chain, you can easily replace it by replacing the clip with the old chain and turning the tire, etc. There are various techniques, so please check carefully.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100 TypeD
Very high CP ◎No accuracy problems
[How is it used?
Installed on a JC75 Grom.
The custom is an external Full Exhaust System, Mukawa N-15 High Camshaft, i-map, and a mid to high speed Emphasis on Torque Light tuneSpec. with air cleaner processing.
At the same time, DID's SUPERNon-seal Chain was installed.
Was the one you received as per Image?
The image is just as I imagined.
Was the installation difficult?
The maintenance stand I bought the other day didn't fit, so I had no choice but to ask the Shop to install it.
How was your experience with it?
The 14T was introduced, 1T lower than the OEM 15T. The Grom's 4-speed Mission is easier to enter the power band when the Final is set to CROSS, and acceleration is lighter with a higher GEAR ratio in 4th gear.
As a Merit, the Torque feeling during acceleration has been improved as intended, and the expected acceleration feeling can be obtained even when climbing hills. Also, the maximum speed on level ground has increased.
As for the Demerit, fuel consumption will deteriorate because of the higher cruising RPM, and the noise and vibration are somewhat annoying when cruising at high speeds. Naturally, the maximum speed is also reduced. In addition, Groms have a speed sensor in the transmission, so the speed meter can be inaccurate. Groms are happy (displayed higher) by about 10%, but they are also unhappy by about another 10%. (e.g. GPS:60km/h Meter before replacement:66km/h Meter after replacement:72km/h)
[Included Parts:were they on?
HolderPlate is included; Bolt is also recommended for replacement but not included.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If you want to dress-up the Sprocket Cover, you should purchase it first.
View detail
Fits: HONDA APE 100, HONDA APE 50
Mounted on TM-MJN24
Air screw is attached on the outside and is quite easy to turn, and Idle screw is OEM and is Small, Left Side, and Right Side.
In addition, APE has a Merit that can be easily turned by making it large enough to fit through a frame, so it can be recommended for setting efficiency.
View detail
Fits: YAMAHA WR250R, KAWASAKI Z900, KAWASAKI NINJA250SL, HONDA CRF250M, HONDA CBR600RR, HONDA CBR1000RR, HONDA CB400SF, HONDA CB1100, HONDA Super Cub 110, HONDA Dax125, HONDA CL250, KAWASAKI Ninja650, YAMAHA WR250X, HONDA CBR250RR, KAWASAKI Ninja ZX-4R SE, HONDA CT125, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250 RALLY, HONDA CRF250L
YOSHIMURA Oil Filler Cap Type-FB
Quality and texture information Aluminum clean products be marked nicely for use Product to buy together o-ring It's easy to install Cost performance and comparison with other products Spotgawa products give o-ring but not yoshimura WeBike packaging is always great, arriving in a week for delivery and packaging There are no concerns, precautions, or advice when purchasing except for not giving a specegawa oil cap and o-ring It's just different in appearance from the brand marking View detail
Fits: HONDA ZOOMERX, HONDA APE 50, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE TypeD, HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR80, HONDA NSR50, HONDA NSF100, HONDA NS-1
Hollow Axle Shaft
Quality and texture information products are empty in the center be neatly finished Regarding the feeling of use, the stiffness of the body is not immediately known, but it was replaced because it was an old product Product to buy with Aluminum Axle Color Installation difficulty tools are required Cost performance and comparison with other products seem to have better rigidity than std products And light WeBike packaging is always great, arriving in a week for delivery and packaging Concern, caveats, or advice when purchasing Since it is a product chosen by many people, I bought it with confidence View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE TypeD, HONDA XR80, HONDA XR50 MOTARD, HONDA XR250MOTARD, HONDA XR250 BAJA, HONDA XR250, HONDA XR250, HONDA XR100MOTARD, HONDA XR100R (for competition), HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XE75, HONDA XE50, HONDA NSF100
It's usually good
OEM is Quantity:2pc. You need to buy a Set, but this is Quantity:1 Set of 2pcs. so it is slightly less expensive. I recommend this product because there are no exhaust leaks so far. View detail
Fits: SUZUKI DF125, HONDA APE100, HONDA APE100 TypeD, HONDA APE50, HONDA APE50 DX, HONDA APE50 TypeD, HONDA BENLY CD125 T, HONDA BENLY CD90 , HONDA BENLY110, HONDA BENLY50S , HONDA BENLY50, HONDA BITE, HONDA BROAD, HONDA BROAD 90, HONDA CABINA, HONDA CABINA90, HONDA CB125 T, HONDA CBR125R, HONDA CBX125 F, HONDA CBX125 Custom
Mini greap hunter
very good grips, similar to the factory ones, very soft, comfortable to hold, I really liked it, I will recommend it to my friends View detail
Fits: HONDA CBR650R, HONDA CB650R, KAWASAKI KLX250, KAWASAKI ER-6, KAWASAKI ER-4n, HONDA MONKEY, HONDA ZOOMER, HONDA XV1000V, HONDA XR50 MOTARD, HONDA XLR250R, HONDA XLR250BAJA, HONDA X4, HONDA VTR1000F, HONDA SL230, HONDA PCX, HONDA PCX150, KAWASAKI ZXR750, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900
Good goods!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
Fits: HONDA XR100MOTARD, HONDA APE 100, HONDA APE 100 TypeD
lightweight of the ape100
Quality and texture information is light. It's good to set it up for each engine The engine response to the feeling of use is light It's hard to install There should be a tool dedicated to the rotor Cost performance and comparison with other products are not comparable to other products But it's expensive WeBike packaging is always great, arriving in a week for delivery and packaging As it is difficult to install concerns, precautions, or advice when purchasing, it is recommended to look at the manual carefully before installing it. However, parts that cannot be handled easily because of the high price View detail
Fits: HONDA XR100 Motard, HONDA Ape 100, HONDA XR100 Motard, HONDA Ape 100
ape100 engine Knock Pin Set
There is no difference from the About quality and textured product It's not used yet. It's going to be used for engine overhauls Recommended if installation difficulty engine disassembly is possible Cost performance and comparison with other products It is easier to buy and use compared to std products WeBike packaging is always great, arriving in a week for delivery and packaging Concerns, precautions, or advice when purchasing Since it is an aluminum product, it must be stored clearly I recommend this product if you do engine overhaul View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, HONDA APE 100, HONDA BENLY50CD90, HONDA BENLY90 S, HONDA GORILLA, HONDA GORILLA, HONDA CUB-based Engine CL, HONDA CUB Engine CD
Fuel Cock M14
It is a product with good quality and texture information There is no difference in the feeling of use from the std products It's easy to install Cost performance and comparison with other products are cheaper than std products WeBike packaging is always great, arriving in a week for delivery and packaging Purchasing concerns, precautions, or advice The rubber packing may be damaged if tightened at too high torque. It should be tightened to meet specifications View detail
Fits: HONDA CUB-based Engine (CD), HONDA CUB-based Engine (CL), HONDA BENLY90 S, HONDA BENLY50CD90, HONDA MONKEY, HONDA APE 50, HONDA MONKEY, HONDA GORILLA, HONDA APE 100 TypeD, HONDA GORILLA, HONDA APE 100
Big Bore Carburetor (PC20)
Quality and texture information larger than std products big carbreter is definitely fuelled for its sense of use HOSELINE FOR PRODUCTS TO BUY WITH It's easy to install It provides a lot of fuel because it is larger than the cost performance and comparison with other products WeBike packaging is always great, arriving in a week for delivery and packaging When purchasing, it is recommended to make sure that the big carbreter is right for you in the items of concern, precautions, or advice. However, fuel efficiency may not be good because of too much fuel injection. The pc20/pe24 carbreter was not fuel efficient View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA Ape50, HONDA CD50, HONDA GORILLA, HONDA CL50, HONDA Ape50, HONDA 12VDAX50, HONDA Ape50, HONDA MONKEY (FI), HONDA MONKEY, HONDA XR100Motard, HONDA XR50Motard, HONDA GORILLA, HONDA Ape50(FI), HONDA Ape50(FI), HONDA Ape100
Black, after all!
I wanted to make the footpeg in Aluminum … but Silver is ….
This was the only Black available, though, which was the deciding factor in my purchase,
I installed it and am satisfied with Large!
Made by Takegawa! There is no doubt that it is both premier and custom, and of course, practical!
It is more stable and easier to operate than the OEM rubberfootpeg.
It is one of the bestItems I have ever bought♪
If it were a little cheaper, there would be nothing to say, but after seeing the product's construction, it was a good one at a reasonable price.
View detail
Fits: GASGAS TX RANDONNE, HONDA 125T MASTER CUSTOM, HONDA 250T MASTER/LA CUSTOM, HONDA APE/DX(FI), HONDA APE/SPECIAL/DX, HONDA APE100/DX, HONDA ATC70(TRIKE), HONDA BENLY (CD50), HONDA BENLY (CD50S/SP), HONDA BENLY (CL50), HONDA BENLY CD125T, HONDA BENLY CD125T, HONDA BENLY CD90S, HONDA BENLY CD90, HONDA BENLY CD90, HONDA BENLY(CD70K), HONDA CB125T, HONDA CB50S, HONDA CD250u, HONDA CHALY(CF50)
Performance is top notch!
The Engine is good and spurts out perfectly.
But 3 times more than the price of Normal plug!
Cost performance is the lowest!
The average score between the two would be about 3 points!
View detail