Reviews
Fits: KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZX-9R, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZRX1200S, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZXR750
SUNSTAR Racing Steel Sprocket
Item safe landed..packing was perfect..correct item.my second set for my next change.very good product from sunstar.very surprise package arrived super fast within 3days..well done TEAM WEBIKE!!!.. awesome..highly recommend to shop at webike.thank you.more comming View detail
Fits: KAWASAKI 750Turbo, KAWASAKI 750Turbo, KAWASAKI ER-4n, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI GPz1100, KAWASAKI GPz1100, KAWASAKI GPz1100, KAWASAKI GPz400, KAWASAKI GPz400F, KAWASAKI GPz400F, KAWASAKI GPz400F, KAWASAKI GPZ400FII, KAWASAKI GPZ400FII, KAWASAKI GPZ400FII, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja1000, KAWASAKI Ninja1000SX
Black so it looks tighter.
What made you decide to buy?
Since the beginning of the New Year 2024, I have been gradually collecting parts and trying to carry out a customization that I have been envisioning since last year … that customization is to replace the front rear sprocket and chain. Why did I choose the Sunstar Racing Steel rear sprocket? The reason for choosing the Sunstar racing steel rear sprocket and chain is that the power and traction control of modern supersports are constantly subjecting the sprocket and chain to high and fluctuating loads. Although there is no change in weight with the stock steel and Sunstar also made of steel, we chose a rear sprocket that delivers super durability that can take the power.
[How was the installation?
When replacing the sprocket, you will need a racing stand to lift the rear tire and a long spinner handle to loosen the axle nut. Also, a Torque wrench is necessary for Torque management.
Float the tire on the rear stand, loosen the axle nut, pull out the shaft, and remove the wheel. I always use a scrap tire from a car to put the removed wheel on the stand. I always use a scrap tire from a car to put the wheel on the stand.
While removing the Rear Sprocket, it is a good idea to clean up the area around the back of the Sprocket that has become sticky with the Chain lube. After cleaning, fix the Rear Sprocket, but since there is a little play, fix the Sprocket nut while pulling the Chain in the direction where the Chain is pulled. It is recommended to mark the Sprocket nut to confirm the tightness.
How was your experience with it?
At first, I was not sure if I should reduce the number of pins and make it Long, but I didn't want to have a misprint on the Speed display, and I also liked the ride quality of the OEM, so I decided to use the same 43 pins. So there is no change between before and after the replacement, but the OEM 6R is easier to handle. 21 year old ZX-6R has Front 15T, Rear 43 Dings, Reduction Ratio 2.866, Chain linkage 112.
View detail
Fits: KAWASAKI Z1100R, KAWASAKI Z250FT, KAWASAKI Z750LTD, KAWASAKI Z750FXII/III, KAWASAKI Z1100GP, KAWASAKI Z1000R, KAWASAKI Z1000P (POLICE), KAWASAKI Z1000 (air-cooled), KAWASAKI Z750FX, KAWASAKI Z750 (air-cooled), KAWASAKI Z400LTD, KAWASAKI Z550, KAWASAKI Z400GP, KAWASAKI Z400LTD, KAWASAKI Z400FX/Z400J, KAWASAKI Z250LTD, KAWASAKI Z750FXII/III
just a minute
I am a little concerned about the weight of the car. View detail
Fits: KAWASAKI GPZ250R, HONDA CB500F, HONDA PCX150, KAWASAKI Z250FT, YAMAHA MAJESTY250(ALL MODEL), YAMAHA MAJESTY250C(ALL MODEL), YAMAHA FAZER(ALL MODEL), YAMAHA TREET(ALL MODEL), YAMAHA DIVERSION(ALL MODEL), YAMAHA SEROW(ALL MODEL), YAMAHA GRAND MAJESTY(ALL MODEL), YAMAHA Axis(ALL MODEL), YAMAHA Zr(ALL MODEL), YAMAHA YZF750R(ALL MODEL), YAMAHA YZF-R17(ALL MODEL), YAMAHA V-MAX(ALL MODEL), YAMAHA T-MAX(ALL MODEL), YAMAHA FZX250(ALL MODEL), YAMAHA FZr500(ALL MODEL), YAMAHA DT200(ALL MODEL)
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Ninja650, KAWASAKI VALCAN S, KAWASAKI VERSYS1000 SE, KAWASAKI VERSYS650, KAWASAKI Z H2, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-25R, KAWASAKI ZX-6R, KAWASAKI 750Turbo, KAWASAKI ER-4n, KAWASAKI ER-4n, KAWASAKI ER-6f, KAWASAKI ER-6n
Stable SUNSTAR
I was not sure about BlackSteel, but I decided that lightness is justice.
I changed from 43T to 42T, but since it is Rear, I don't think it changes anything experientially.
Next time I will change Front as well and see how it goes.
View detail
Fits: KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900)
Z1R
The Chain Adjuster on my Z1R was dirty and I was concerned about it, so I replaced it at the same time as the Axle Shaft. I am not sure how well it works, but I am Large satisfied with my car which is getting cleaner and cleaner. View detail
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
NisshinBrake master cylinder kit (Horizontal Type)
I wanted to finish bleeding the air out of the brake fluid in one go, so I replaced it together with the brake hose replacement. The touch of the brake also worked better than before, and I am satisfied with the large change. I recommend everyone to dress-up the front area! View detail
Fits: KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z1100 (KZ), KAWASAKI Z1000 (air-cooled), KAWASAKI Z1100GP
Nice product.
Great quality product and superb finish. Have yet to install these, so can't say how good the fitment is to the original Shipment was super fast and only down side was the import duties which can't be avoided. View detail
Fits: HONDA GYROUP, HONDA GYRO CANOPY, HONDA GORILLA, HONDA ELSINORE 250(MT250), HONDA APE TypeD, HONDA XR50 MOTARD, HONDA TL125IHATOVO(TL125S), HONDA XR400 Motard, HONDA XR250MOTARD, HONDA XR250, HONDA XR230MOTARD, HONDA XR100MOTARD, HONDA XR230, HONDA XLX250, HONDA XLR250, HONDA XL500, HONDA XLR250, HONDA XL400R, HONDA XL250, HONDA XL125
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
Fits: YAMAHA YZF750SP, YAMAHA YZF600 THUNDER CAT, YAMAHA YZF1000 THUNDER ACE, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA XS650, YAMAHA XS650, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJR1200, YAMAHA XJ600, YAMAHA XJ550 (81 - 85), YAMAHA TX650, YAMAHA SR500
Black gold is cool.
I have been using NORMALSpec. (made by DID) for many years, and the Chain has been extended, and I was concerned about the noise of clattering interference at low speeds, so I took the plunge and purchased this product.
I was told by the motorcycle shop that the Large was still strong, but I felt discomfort when changing gears or putting in Neutral, and after this replacement, I am satisfied with the Large change as it returns to GEAR operation as it was when the car was new. I think the fact that I also replaced the front and rear Sprocket at the same time also had an effect.
I was not sure about DIDChain, but I chose RKChain, and instead of Gold, I chose Pin-only GoldSpec. with Black base color. As a result, I am personally satisfied with the large size. I am personally satisfied with Large. I have not done that much mileage yet, so I'll give it a 3 for durability.
View detail
Fits: KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZX-9R, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZRX1200S, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZXR750
Sunstar racing steel sprocket
Item received safely.my third order in two month.really satisfied with webike.packing was super awesome.very professional.overall great service.highly recommended.no regret to shop at webike.thank you webike View detail
Fits: KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZX-9R, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZRX1200S, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZXR750
Sunstar Sprocket
Item received.. excellent.. quality and finishing superbe..yet to be fix.item take 4days to delivery..will shop again at webike. View detail
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
For Upgrade of front brakes master
Upgraded TRX850 front brakes master with NISSINsemiRadial brake master.
I opened the package and checked the details and it is very QUALITY and the accuracy is perfect!
Installation on the car body is also completely hassle-free, as the product is guaranteed to fit the car body.
The braking feel is completely different from that of the OEM, with braking power rising quickly from the beginning of the grip and very good control after the grip has been applied.
The design of the product is also compatible with out-of-print cars.
The work kill was set as intermediate because the brake fluid had to be drained once and the air was drained again after installation.
Please refer to the following URL to see the installation work as it is uploaded in the diary.
https://imp.webike.net/diary/251725/
View detail
Fits: KAWASAKI ZZR600, KAWASAKI ZZR1200, KAWASAKI ZXR750R, KAWASAKI ZXR750R, KAWASAKI ZXR750R, KAWASAKI ZXR750R, KAWASAKI ZXR750, KAWASAKI ZXR750, KAWASAKI ZXR750, KAWASAKI ZXR750, KAWASAKI 750Turbo, KAWASAKI 750Turbo, KAWASAKI ER-4n, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI GPz1100, KAWASAKI GPz1100, KAWASAKI GPz1100, KAWASAKI GPz400, KAWASAKI GPz400F
Purchased for Setting
I purchased this for Setting up a vehicle that I use in Race.
I haven't had a chance to go out yet, but the quality is very good to see and touch in person.
I will also buy the number of Ding that I normally use.
View detail
Fits: HONDA CB750F, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, HONDA CB900F, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300 Super Four, YAMAHA YZF750SP, YAMAHA YZF600 THUNDER CAT, YAMAHA YZF1000 THUNDER ACE, YAMAHA YZF-R7, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA XS650, YAMAHA XS650
It looks super cool and slick.
I had never been this proud of my chain purchase before. It looks better than the gold and of course the silver. Its marked as the best rk chain in the market and i am about to test it out. Otherwise, it looks appealing. View detail
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
Article of good quality
Product of good quality and arrives fast. Well pack and arrives in good order. Parts are genuine. Tracking facility are reliable View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z1100GP, KAWASAKI Z1100 (KZ), KAWASAKI Z1100GP, KAWASAKI Z1100R
I think you should buy OEM Parts.
I am not sure if I checked enough, but it seems that OEM Parts are still available and OEM Product can be purchased.
The S1 footpeg is a product of a manufacturer with a lot of gapping (the footpeg rubber on the S1 footpeg has twice burst, the weld on the footpeg has come off, and the regulator has failed so quickly that I switched to PAMS), and the price is not that different from OEM parts, so I think it is better to buy OEM parts. I think it is better to buy OEM parts.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Ninja650, KAWASAKI VALCAN S, KAWASAKI VERSYS1000 SE, KAWASAKI VERSYS650, KAWASAKI Z H2, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-25R, KAWASAKI ZX-6R, KAWASAKI 750Turbo, KAWASAKI ER-4n, KAWASAKI ER-4n, KAWASAKI ER-6f, KAWASAKI ER-6n
Lightweight &Dress-up
It is just so light. I don't feel any stress at all while riding. It looks beautiful and perfect. View detail
Fits: KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z1100R, KAWASAKI Z1000J, KAWASAKI GPz1100
Ease of Attachment
The instruction manual was easy to understand and almost completely self-explanatory.
It also looks cool.
View detail
Fits: KAWASAKI Z1100R, KAWASAKI Z1000J, KAWASAKI GPz1100, KAWASAKI 750 Turbo/Z750 Turbo, KAWASAKI Z1000R
Yesterday it worked fine!
The OEM Engine Starter Motor was replaced due to poor response.
I just replaced the Coupler and it worked fine.
Wiring is shorter than OEM, so the handling has been changed.
OEM passes between Meter and Cowl, but cannot reach it.
The frame is attached to the handlebar with Tie Wrap.
View detail