Reviews
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESS110, SUZUKI STREET MAGIC 110, SUZUKI ADDRESS V100, SUZUKI LETS4 Palette, SUZUKI LETS4 Basket, SUZUKI STREET MAGIC 50, SUZUKI VERDE, SUZUKI ZZ, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI AddressEX, SUZUKI AddressWAY, SUZUKI High, SUZUKI high-R
Cost-effective Brake
Addressv125 (K7) Mounted on the
Brakes now work better than before the replacement.
I think it's a good deal because you can buy a Brake Shoe for a similar Gold amount to another company's Brake Shoe, which claims to be the OEM equivalent.
However, it is difficult to determine whether the Brake is a function of the pad's performance or whether maintenance restores the functionality of the pad.
I think it was more effective than at the same time when it was a new car.
Full Brake, of course, does not lock. But, there is a sense that the brake wire is extended. I think it used to be a little more firm and direct. If you replace the wire, you may go back to the feeling you had when the car was new.
《Situation》
Replaced at 39,000 km mileage on a vehicle that has been driven from new.
Brake Pads is the first replacement
Wheel side is not only for cleaning but also for vertical paper hanging.
There was a little wear on the wheel side, and there was a little difference between where the shoe hit and where it did not.
View detail
Fits: SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII COMBINATION BRAKE (LETS Two Combination brakes), SUZUKI LetsIIL COMBINATION BRAKE (LETS Two Elle Combination Brakes), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ)
Best Quality for Replacement Turn Signal Glasses
Fits: SUZUKI sepia, SUZUKI Address V125S, SUZUKI Address V125S Limited, SUZUKI Address V125S Limited, SUZUKI Address V125S, SUZUKI Address V125SS, SUZUKI Address V125S, SUZUKI Address V125S, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100
BreakingWave Disc Rotor
This is my second purchase. Made in Taiwan, reliable, accurate, and satisfactory. It is also safe in the rain. The price is half of Normal, and the life is about 2/3 of Normal.
Caliper fits into the valley portion of the wave, making it easy to control the remaining thickness.
View detail
Fits: SUZUKI SEPIA ZZ, SUZUKI SEPIA ZZ, SUZUKI STREET MAGIC, SUZUKI HIUP, SUZUKI HIUPR, SUZUKI ZZ, SUZUKI Address, SUZUKI AddressEX, SUZUKI AddressV, SUZUKI Address Tune, SUZUKI STREET MAGIC S, SUZUKI STREET MAGIC SD, SUZUKI SEPIA, SUZUKI SEPIA RS, SUZUKI LETS, SUZUKI LETSS, SUZUKI VERDE
Quality is very good
Very good quality and safe to use.
BALI must take
View detail
Fits: SUZUKI birdie, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA Cygnus, YAMAHA Cygnus, HONDA APE 50, HONDA GORILLA, HONDA SUPER CUB 50 (AA04), KAWASAKI KDX125/SR, KAWASAKI KDX250SR, SUZUKI LETSG, SUZUKI LETS4, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI ADDRESS V100
bulb-out replacement
I was looking for a product that was out of bulbs and the same etc. as the installed product, found this one and purchased it.
The price is reasonable and I hope it has some longevity.
Brightness and other aspects of the Level are fine for normal use.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Bright!
The Halogen bulb was no longer working, so I decided to replace it anyway!
I had previously purchased an LED that claimed to be an "explosive light" on the Internet, but it was the exact opposite, being darker than the original and thus useless, so I wondered if this would be the same. I was a little bit nervous about purchasing it and installed it with Tokyo Do Reflector Light and some modifications, but I am happy to say that it is bright and has perfect visibility!
However, I need to note that the OEMGlass Lens Light of the old CUB I tried is not able to secure the Stroke of the LED Lamp - so I need to be careful!
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
The total length is long, so make sure to check in advance.
[How is it used?
The Headlight Bulb of the LITTLE CUB that was given to me was out of order, so I searched for a replacement bulb to brighten it up.
Was the one you received as per Image?
A little longer overall than I thought?" I felt that the LDE sphere is like that?
The product was generally in line with the Image.
How was your experience with it?
I immediately replaced the OEM bulbs and PonLEDs that had gone black due to bulb failure and checked the headlight from the front, and found that it was close to the lens side of the headlight (not hitting the Lens, but the Clearance was about 5mm).
I did the work without checking the Instruction Manual & notes on the back of the Package due to my bad habit, but the back of the Package has a *Not available for MONKEY, APE, and SUPER CUBSeries. (Electrically not compatible with FI (Injection) Spec. cars of these models. (Also, carburetor spec. cars cannot be installed due to their dimensions. It was firmly stated.
LITTLE CUB is Material:I wonder if it was possible to install the plastic Lens because it is thinner than the old SUPER CUB's Glass Lens. However, there is a possibility that the heat generated by the LED bulb may affect the Lens, so we would like to monitor the progress at our own risk (likewise, those who install the Lens should do so at their own risk).
I started the engine and checked the light...it was so bright that I felt sorry to compare it to the OEM (the battery is completely dead, so there is a slight flicker at low rpm...) I am looking forward to driving after the Restore.
[Points to note]
As mentioned above, there are some car models that cannot be installed (for electrical or physical reasons), so do not purchase without thinking, as I did, and make sure to confirm the installation beforehand.
How did it compare to other products?
As for the CUB, I only know the OEM Headlight Bulb and the PonLED (and the PonLED was cheaper than the P7noHalogen bulb), so I can't say too much about the large size, but it is wonderfully bright compared to the OEM lantern light.
However, I will have to continue to check the LEDs in the future, as they sometimes make it harder for my old eyes to see what is in front of me in the rain.
Other items that would be helpful
Point and hang of installation
No difficult wiring etc., and can be installed in the reverse order of how the OEM bulbs were removed.
Large is strong, and it's not difficult.
[ITEMS TO BUY TOGETHER
If you only need to replace the Headlight Bulb, this product alone is Large sturdy (you will need the right tools for the job), but if you also want to replace the Blinker and Dale, you should also purchase products that meet your requirements.
[Opinions and requests to Manufacturer
When it comes to Motorcycle light bulbs, I trust Mats Stripe.
View detail
Fits: SUZUKI SWISH, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, SUZUKI LETS5, SUZUKI Address V50, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI LETS4, SUZUKI LETS, SUZUKI ADDRESS V50 G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI Gixxer 150.
It is safer to replace it with a new one every time Oil is replaced.
This Washer has two sides, but the instructions are easy to follow and you will not get lost.
If it were cheaper, I would change it every time, but frankly, I don't think it would leak even if I changed it every two times. (I don't know...)
View detail
Fits: SUZUKI LETS, SUZUKI ZZ, SUZUKI ZZ, SUZUKI ADDRESS110, SUZUKI ADDRESS110, SUZUKI Address50, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, SUZUKI ADDRESS V50 (4Cycle), SUZUKI ADDRESS V50 (4Cycle), SUZUKI CARNA, SUZUKI Shot, SUZUKI STREET MAGIC, SUZUKI STREET MAGIC
The best spare pads
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
PONLED PONLED LED Bulb!
I bought this product after looking for a Type LED Bulb that I could simply replace the bulb with.
4.I used it for the headlight of ADDRESS V100 which was converted to 5-inches Bates Headlight. Since the tip of the LED Bulb touches the Lens surface of the headlight, I shaved the tip of the Valve a little and installed it to secure the Clearance.
There are no particular problems with brightness or installation, but it is necessary to pay attention to the size of the light case used and the overall length of the Valve, etc.
It is easy to convert to LEDs by simply replacing the Valve without any wiring work.
Incidentally, it is compatible with both DC and AC.
View detail
Fits: SUZUKI DF125, HONDA APE100, HONDA APE100 TypeD, HONDA APE50, HONDA APE50 DX, HONDA APE50 TypeD, HONDA BENLY CD125 T, HONDA BENLY CD90 , HONDA BENLY110, HONDA BENLY50S , HONDA BENLY50, HONDA BITE, HONDA BROAD, HONDA BROAD 90, HONDA CABINA, HONDA CABINA90, HONDA CB125 T, HONDA CBR125R, HONDA CBX125 F, HONDA CBX125 Custom
HUNTER Grips
HUNTER Grips Excellent grips, good pattern, good value for money. Universal option for almost any moped. I take not the first time, everyone is happy! Great grips, good pattern, good value for money. Universal option for almost any moped. I take not the first time, everyone is happy! View detail
Fits: YAMAHA Remote controller jog, YAMAHA MATE80, YAMAHA MATE50, YAMAHA JOG Zr, YAMAHA YV50 Z II, YAMAHA JOG Z, YAMAHA JOG, YAMAHA Axis Treat, YAMAHA Axis, YAMAHA Vino, YAMAHA BJ, SUZUKI LETS II Standard, SUZUKI LETS II G, SUZUKI LETS II, SUZUKI LETS4 Palette, SUZUKI LETS4 Basket, SUZUKI LETS4, SUZUKI Birdie90, SUZUKI Birdie80, SUZUKI Birdie50
Easy to use
The thickness is just right and it is easy to handle. I have only been using it for a few days, so I don't know how durable it is, but I would definitely recommend this product over the inferior ones you can buy at home centers. View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESS110, SUZUKI STREET MAGIC 110, SUZUKI ADDRESS V100, SUZUKI LETS4 Palette, SUZUKI LETS4 Basket, SUZUKI STREET MAGIC 50, SUZUKI VERDE, SUZUKI ZZ, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI AddressEX, SUZUKI AddressWAY, SUZUKI High, SUZUKI high-R
be effective
OEM is shit of shit so exchange Safe Level View detail
Fits: HONDA CB125, HONDA CBX125, HONDA TLR200, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125, HONDA NSR50, HONDA NSR80, HONDA Super Cub 50, HONDA Super Cub 90, HONDA monkey
Normal is best
It is a standard product that is neither too much nor too little, and can be used with confidence. I haven't tried it yet, but when I replace the Valve, I almost always use this Valve. View detail
Fits: SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle)
Is it not higher performance than OEM Product?
I love my 2-stroke carburetor scooter, and I clean it every 10,000 km with a pipe fnish because clogging of the exhaust system is inevitable. But I replaced the exhaust system because it was reaching the end of its service life. The Exhaust System in question is Quantity:The design of the exhaust guard has been changed for a better look. The installation is perfect with no gap at all at the bolt holes. View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Cospa strongest
It is now so bright that it is dazzling.
Recommendation.
Commendation for commuting to work and school
View detail
Fits: SUZUKI catanariquid cooled, SUZUKI zillion, DUCATI 400 Super Sport, DUCATI M400 Monster, ITALJET Formula 50, SUZUKI K50, SUZUKI RC50, SUZUKI zzz, SUZUKI address, SUZUKI Address 110, SUZUKI Address EX, SUZUKI Address V, SUZUKI address-way, SUZUKI address tuning, SUZUKI epoch-making, SUZUKI epoch-making, SUZUKI Koreda Scrambler 50, SUZUKI Koreda Sport 50, SUZUKI street magic, SUZUKI Street Magic II
OEMPlug
When I went to Iridium plugs, they immediately covered them and I decided to go back to Normal plugs.
Apparently, the Normal plug is more compatible with the MONSTER400 from Initial Model Carburetor Vehicles.
View detail
Fits: KAWASAKI KLX125, KAWASAKI Epsilon 150 (03 - 04), SUZUKI DR-Z125L, SUZUKI ZZ, SUZUKI ZZ, SUZUKI ADDRESS110, SUZUKI ADDRESS110, SUZUKI ADDRESS110, SUZUKI Address50, SUZUKI ADDRESS V100, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, SUZUKI ADDRESS V50(2Cycle), SUZUKI AVENIS 50 (99), SUZUKI AVENIS125, SUZUKI AVENIS150, SUZUKI STREET MAGIC, SUZUKI STREET MAGIC 110
Braking force Up is not good.
The standard Brake Pads were not working well and had been bothering me for some time.
I had no inconvenience on ordinary roads, but when I had to go through a mountain pass to work, I was a little afraid of the braking force that did not change at all even if I held on to the wheel downhill, so I replaced it.
I chose RK again because it is affordable and well made.
I didn't like Brake dust either, so it is Fine alloy with a little more METAL component.
The exchange was not particularly difficult and was completed normally.
The key is the efficacy, but it is better than standard.
There may be some deterioration of the Brake Master etc., so there is no drastic change, but I can control the car safely even on the descent of the pass which I was afraid of.
Control has also been improved and is generally easier to use.
Gold on the back of the Pad is cool too.
The "zing" sound during braking is like a metal pad.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
It's still bright.
The headlight is dark and I had been holding back because I had read that Halogen bulbs would melt the lenses. I had to remove the Valve Reflector, but it can be removed by removing one screw from each of the screwdrivers.
It is still totally bright. The low power consumption eliminates flickering even when Idling.
View detail
Fits: SUZUKI Address V100, SUZUKI sepia, SUZUKI ZZ, SUZUKI ADDRESS V100, SUZUKI ADDRESS V50(2Cycle), SUZUKI ADDRESS V50(2Cycle), SUZUKI SEPIA, SUZUKI SEPIA, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle)
HURRICANE HandlebarKIT for ADDRESS V100
The headlight cowl on my ADDRESS V100 has become so painful that I bought it to convert it to a Pipe Handlebar and replace it with a Bates Headlight.
I was skeptical about whether or not parts were still available for a brand-new Pipe Handlebar KIT for the ADDRESS V100, an out-of-print 2nd generation almost 20 years ago, but I was able to purchase one.
ADDRESS V100 is equipped with switches on the Cowl side, so it is possible to use other quantity:Pair (for Left and Right) The following switch boxes are required for the left side switch box. I use OEM reused Throttle holders for Engine Starter Motor only, and Universal Product for Left Side Switch Box, which includes Headlight, Horn, and for Blinker switches.
Contents include Handlebar Setter, SUZUKIfor VehicleHandlebar (Throttle section diameter is narrow) The kit consists of a Bates Headlight, Handlebar Post, Mini speedometer, Meter Bracket, and for FrontBlinker set.
Since it involves wiring work, it is safer to have Shop do the work if you are not confident.
I am satisfied because I was able to renew the style around the handlebar and optimize the position at the same time.
View detail