Reviews
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-07, YAMAHA MT-25, YAMAHA MT-03, YAMAHA Tracer9GT, YAMAHA Tracer900, YAMAHA Tracer900GT, YAMAHA MT-09Tracer , YAMAHA XSR900, YAMAHA XSR700, YAMAHA FZ1/Fazer
Very satisfactory product
The finish is satisfactory in terms of both texture and ease of use.
However, the gap between the tank and the cap is a little empty, so we have to be a little careful when washing the car in the rain or when washing the car, but there is no problem because water never enters the tank.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, YAMAHA MAXAM, YAMAHA Bolt CSpecifications, YAMAHA Bolt CSpecifications, YAMAHA Bolt, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA FAZER8, YAMAHA XG250 TRICKER, YAMAHA DRAGSTAR250, YAMAHA SEROW250, YAMAHA DRAGSTAR250, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY400
Good product that can take 3 power supply outlets
I bought it to get power for Tachometer and ETC. The unneeded harnesses are mercilessly cut off and used as materials for other electrical work. The harnesses are too long and are in the way, and they become harness resistors and waste energy. The output side harness is also long, but do not cut that one off. The harness is connected to the battery and ACC power source, and is energized when the key is turned on, so there is no need to worry about the battery going up. The included instruction manual is very carefully written, so please read it carefully before you start work. View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R1000, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA Zeal, HONDA CBR500R, YAMAHA YZF750SP, YAMAHA YZF750R, YAMAHA YZF1000R ThunderAce, YAMAHA YZF600R Thundercat, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1
Used to convert brembo Floating Disc to semiFloating
Used to rebuild a Large old brembo Casting IronRACINGdisc.
But to begin with, RACINGdiscs made by brembo are supposed to be non-disassembled and disposable, so you are entirely on your own when you replace the pins.
Since these are life-threatening and extremely important parts, we cannot afford to be lax in our work.
If you are not at all confident, you should not work on it yourself.
No kidding, if you fail, you usually die.
Replacement begins by disassembling the pins that are fixed in place with resin to prevent disassembly.
It is not to be reused, but be careful…… not to get Wound in the Disc or Inner.
The RACINGdisc of brembo is Full floating so that it works Pushingja Pushingja.
Hence, you can get excellent Touch when it is new, but at the cost of immediate rattling.
If rattling occurs, the original touch cannot be obtained (judder may occur in the hard brake), so it is a recommendation to replace this pin with a semi-floating one before this happens, preferably from the time the pin is new.
If you are a serious racer, you can use the disc as a consumable to be replaced in a very short time, but it won't last 3000km on public roads…….
I can't afford 80,000 yen for every 3,000 km, so I have to get ahead of myself!
In this case, we used it to recondition an old Casting Irondisc, and a used disc that had already been rattled and reduced after years of use on public roads.
The purpose is to semi-float the disc that has already exceeded its wear limit and should not be used, and to bring it into a state where it can be used at its limit.
However, the result was a Large success.
We were able to semi-fix the DISC, which could have been damaged anytime by the Pin moving with a clatter, and make it ready for use.
Technically speaking, this repair is a comedy repair, since it is completely useless, but since it was able to restore the level to a level where I don't feel any problems while driving normally, it is good this time.
However, since it is a dub Lupinchi that disassembles a non-disassembled part and semi-fixes the receiving part of the Pin that is originally worn to the Out Level to deceive, it is all your own responsibility no matter what happens.
I am helped by the Pin performance with great accuracy.
Conversely, Pin's accuracy is excellent and the surface finish, etc. is perfect.
PinBody, Wave washer, Washer receiver, and E-Clip are Quantities:Set, so there is no need to buy anything else.
View detail
Fits: YAMAHA SR400, YAMAHA V-MAX, YAMAHA V-MAX, YAMAHA V-MAX, YAMAHA YZF600R ThunderCat, YAMAHA YZF600R ThunderCat, YAMAHA YZF600R ThunderCat, YAMAHA YZF600R ThunderCat, YAMAHA YZF600R ThunderCat, YAMAHA YZF1000R ThunderAce, YAMAHA YZF600R ThunderCat, YAMAHA YZF1000R ThunderAce, YAMAHA YZF1000R ThunderAce, YAMAHA YZF600R ThunderCat, YAMAHA YZF600R ThunderCat, YAMAHA DRAGSTAR1100 CLASSIC, YAMAHA DRAGSTAR CLASSIC, YAMAHA DRAGSTAR CLASSIC, YAMAHA FJR1300, YAMAHA DRAGSTAR CLASSIC
Sunstar brake disc
quality is great with cnc floating Center part Braking feels good and secure Cost effective with the standard of the product compared to OEM Shipping is quick View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA BT1100 BULLDOG, YAMAHA BT1100 BULLDOG, YAMAHA BT1100 BULLDOG, YAMAHA BT1100 BULLDOG, YAMAHA BT1100 BULLDOG, YAMAHA BT1100 BULLDOG, YAMAHA BT1100 BULLDOG, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FZS1000FAZER, YAMAHA FZS1000FAZER, YAMAHA FZS1000FAZER, YAMAHA FZS1000FAZER, YAMAHA FZS1000FAZER, YAMAHA MT-01, YAMAHA MT-01, YAMAHA MT-01
disc
I'm just watching because Caliper hasn't arrived yet. View detail
Fits: YAMAHA BOLT, YAMAHA FJR1300, SUZUKI BANDIT1250F, SUZUKI DL1000 V-STROM1000, SUZUKI BANDIT1250, SUZUKI TL1000R, SUZUKI TL1000S, SUZUKI KATANA(KATANA), SUZUKI KATANA(KATANA), SUZUKI HAYABUSA, SUZUKI HAYABUSA, SUZUKI GSX1400, SUZUKI GSX-S1000F, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600
For dress-up purposes rather than performance.
I bought this to add a little more Impact since I replaced the OEM Rotor with Arashi's Wave rotor.
I contacted Arashi and they replied that I can use the same 13.85 as the OEM. However, the OEMRotor is Pin?Quantity:It is a little bit extra expense because I need 9pcs. (Lol) 。
Since this is an important safety component when it comes to replacement work, we left it to Motorcycle Shop.
Without the wave washer, it would function as full floating, but since I ride to work every day, I decided to make it semi-floating to reduce wear and tear.
Since the inner rotor is Gold, the Red pin is ImpactLarge.
Since few people have done this much work on their CBRs, it is 120% self-satisfaction.
How much Anodized fading is left to do? I guess.
View detail
Fits: YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ6 FAZER, YAMAHA FZ6, YAMAHA FZ8 FAZER, YAMAHA FZ8, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA NIKENGT, YAMAHA TDM900, YAMAHA XJ6, YAMAHA XJR1300C, YAMAHA XSR900, YAMAHA XT660Z TENERE, YAMAHA FZ6R, YAMAHA MT-07, YAMAHA FZ-09, YAMAHA FZ-07
Improved appearance and feel
It looks much better and the adjustments can be set more precisely, which improves the feel of the operation. However, the grip is a bit more angular than the OEM, which may differ for different tastes. View detail
![[Stock Lever] Brake Master Cylinder Kit [Horizontal Type 14mm / Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/61743_TS.jpg)
Fits: YAMAHA ZEAL, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR1300C, YAMAHA XJR1300, YAMAHA XJ400, YAMAHA TZR250, YAMAHA TZR125, YAMAHA TMAX500, YAMAHA TDR250, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRV250, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA RZ250, YAMAHA RD400, YAMAHA FZR250
NISSIN [Standard Lever] Brake Master Cylinder Kit [Horizontal Type 14mm/Removable Tank Type]
It was installed as a substitute for the 2010 GSX-1250FA genuine master cylinder. The fitting fits perfectly, and the brake operation feeling is the same as the genuine one.
However, the bolts that secure the brake fluid reservoir tank to the handle are not included and must be purchased separately. It took a lot of trial and error to find the right thread pitch. The product is very satisfied. -------------------------------------------------- -------- It was installed as a replacement for the 2010 GSX-1250FA genuine master cylinder. The fitting is perfectly fits well, and the brake operation is the same as the pure. However, the bolt that fixes the brake reserve tank to the handle is not included, so you must purchase it separately. I have experienced several trials and errors to find the right pitch of the screws. The product is very satisfying. Powered by Google Translator
View detail
Fits: SUZUKI GSX-R 1000, YAMAHA YZF-R7 , YAMAHA YZF-R6 , YAMAHA YZF-R6 , YAMAHA YZF-R1 , YAMAHA YZF-R1 SP , YAMAHA YZF-R1 , YAMAHA YZF-R1 , YAMAHA YZF-R1 , YAMAHA YZF-R1 , YAMAHA YZF-R1 , YAMAHA XJR 1300 C , YAMAHA XJR 1300 , YAMAHA XJR 1300 , YAMAHA MT-01 S , YAMAHA MT-01 , YAMAHA MT-01 , YAMAHA FZS 1000 S FAZER , YAMAHA FZS 1000 S FAZER , YAMAHA FZS 1000 FAZER
Genuine JT Sprocket rear for Yamaha YZF-R1
Purchased along with the front sprocket as spare to replace my stock ones when needed. Have used JT sprockets for many years and know they are brilliant quality and do last a long time compared to some other brands. Decided to stick to the oem set up gearing as this is how the bike is supposed to operate. Maybe in the futue I will try a tooth lower in the front but for now, stay OEM gearing. Easy part to find, I was surprised Webikes stocked them really and quite a few different versions for different models and makes. Price was pretty good. Ordered along with other parts so the shipping was good too. Arrived with no faults or issues. The outer box had been sealed with extra tape to ensure, nothing could fall out or escape during transit. Any empty space was filled with air pockets and bubble wrap so nothing could move too much and damage other more delicate parts in the box. The machining of these sprockets is second to none. The spacing for the bolts is perfect. No problems with anything really. I have not found a sprocket that is of high a quality for teh simialr price range before. I will stick with JT Sprockets. Have fitted before and know how they go on really easy little job. As I said, great quality parts from a great UK company. Thanks Webike for the great service as always and help with anything I need. View detail
![[STD Lever] Brake Master Cylinder Kit [Horizontal Type 14mm/Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/61759_TS.jpg)
Fits: YAMAHA ZEAL, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR1300C, YAMAHA XJR1300, YAMAHA XJ400, YAMAHA TZR250, YAMAHA TZR125, YAMAHA TMAX500, YAMAHA TDR250, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRV250, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA RZ250, YAMAHA RD400, YAMAHA FZR250
Installed with the installation of KITACOOpposite Caliper on MT03
Caliper replacement for MT03 due to insufficient capacity of Master Cylinder
We were able to transmit braking force firmly.
However, the OEM handlebar is too tight to handle the hose, so it may be better to replace the handlebar as well.
View detail
Fits: HONDA CB1100EX, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300ST, HONDA CBR250F, HONDA CBR250R, HONDA CBR250RR, HONDA VFR1200F, HONDA VFR1200X, YAMAHA BOLT, YAMAHA BOLT -C, YAMAHA BOLT R, YAMAHA FZ-1, YAMAHA MT-01, YAMAHA MT-01S, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09 TRACER, YAMAHA SR400, YAMAHA SR400S
Poor magnet power, overall quality is ok
For a Japanese item, I expected the magnet to be powerful, but it is very weak, I think, this magnet will be hardly able to catch anything at all. Design is ok, cost is cheap, magnet is cheap too View detail
Fits: HONDA VFR750R, HONDA VFR400R, HONDA VFR400, HONDA SPADA, HONDA RVF400, HONDA RVF, HONDA NSR250R, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA CBR900RR, HONDA CBR400RR, HONDA CBR250RR, HONDA CBR400R, HONDA CBR250RR, HONDA CBR250R, HONDA CB400S.F, HONDA CBR250R, HONDA CB1000S.F, HONDA CB1000S.F
good-looking
Brake's Touch has improved.
It looks cool and works great!
View detail
Fits: YAMAHA XJR1300 C, YAMAHA XJR1300 C, YAMAHA XJR1300, YAMAHA XJR1300 C, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA YZF-R7, YAMAHA YZF-R7, YAMAHA YZF-R7
It is so durable and amazing that you can tell the difference the moment you change it and get on the bike.
The durability is solid, and the feeling that Axel will follow you when you open it is very obvious. View detail
Fits: YAMAHA FZ1-N FAZER, YAMAHA YZF-R1 SP, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA XJR1300 C
For 520Conversion of XJR1300C
[How is it used?
I used it on my MainMotorcycle XJR1300C.
This is a Sprocket that Custom ShopJAM, which used to handle XJR as its main product, requested SUNSTAR to create for 520 for conversion.
SUNSTAR usually has a lineup. 18 guns is expensive since it's a very rare Size...
Rear Sprocket is ISA.
Part numbers are Y-23-40. Rear 40 guns are mounted against Front 18 guns.
I think the OEM was 17-42, so it is a super little bit LongSetting.
Was the one you received as per Image?
It was the very Sprocket of SUNSTAR.
The accuracy is unquestionable. There were no elements of texture that made me uneasy.
Was the installation difficult?
As shown in the image, there is a direction to install the Sprocket, so be careful not to make a mistake.
The size of the front sprocket nut is 36mm.
The tightening Torque is 85 Nm, and the use of Locktite is indicated.
When loosening or tightening, one person can easily work alone by straddling the vehicle body and stepping on the rear brake as hard as possible.
So it is important to always loosen the Rear wheel and Chain before removing them.
How was your experience with it?
Since it is one size larger than OEM, you can rest assured that it will not jump teeth even if you use high RPMs the last time you run it.
Thanks because SUNSTAR is the only way to go unless you special order from ISA or other places.
Please don't discontinue...
[Included Parts:were they on?
There is none. The Memo paper with important instructions is included in the package, so be sure to follow it.
[Was there anything that disappointed you?
I don't have any. If I may say so, just a little cheaper!
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1300C, YAMAHA XJR1300
Oil cooler Protector
YOSHIMURA's Logo is cool. View detail
![[Stock Lever] Brake Master Cylinder Kit [Horizontal Type 14mm / Tank Separate Body Type]](https://global.webike-cdn.net/uiu/impression/202208/16_1021860_62fc2e69ccf09.jpg)
Fits: YAMAHA ZEAL, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR1300C, YAMAHA XJR1300, YAMAHA XJ400, YAMAHA TZR250, YAMAHA TZR125, YAMAHA TMAX500, YAMAHA TDR250, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRV250, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA RZ250, YAMAHA RD400, YAMAHA FZR250
NISSIN Brake Master Cylinder for HONDA BROS 1988
I rebuild my bike up. There were a lot of Brake Master Cylinder on the market but I was hesitant because I was dubious from their manufacturer. I found this online for my Honda Bros NT400J 1988. I'm happy with it and it looks the part for a classic bike.About quality and texture About the feeling of use good Products to buy together brought together with brake pads Difficulty of installation had the pros do it Cost performance and comparison with other products worth the price About shipping and packaging good Any concerns, cautions, or advice when purchasing none. View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA BT1100 BULLDOG, YAMAHA BT1100 BULLDOG, YAMAHA BT1100 BULLDOG, YAMAHA BT1100 BULLDOG, YAMAHA BT1100 BULLDOG, YAMAHA BT1100 BULLDOG, YAMAHA BT1100 BULLDOG, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FZS1000FAZER, YAMAHA FZS1000FAZER, YAMAHA FZS1000FAZER, YAMAHA FZS1000FAZER, YAMAHA FZS1000FAZER, YAMAHA MT-01, YAMAHA MT-01, YAMAHA MT-01
Subtle Control is now easier to do.
To increase the OEM 298mm to 320mm, a radial mount caliper and bracket are used.
Installed.
It is probably an overall effect, but the Control system has improved a lot.
I think it may be due to the pad, but the original brake was not that effective, and I am very satisfied with the new brake, which has improved braking power and looks good.
Caliper, Mount, MASTER, Hose, etc. cost a fair amount of money, but I am happy with the change.
View detail
Fits: YAMAHA FZ6 S2 ABS, YAMAHA FZ6 S2 ABS, YAMAHA FZ6 S2, YAMAHA FZ6 Fazer-S2 ABS, YAMAHA FZ6 Fazer-S2, YAMAHA FZ10, YAMAHA FZ1, YAMAHA FZS1000, YAMAHA FZR600 Fazer, YAMAHA FZR400RR, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ6SHG, YAMAHA MT-09, YAMAHA MT-07A ABS, YAMAHA MT-07, YAMAHA MT-01
It's an easy to use Pad!
I use it with brembo radipon and OEMCaliper.
It is easy to use from city driving to mountain passes, as it feels like it has a firm grip without being severe. 。 Circuit doesn't run, so I don't know.
This Pad is great! It's my ideal Brake effect!
View detail
Fits: YAMAHA Zeal, YAMAHA YZF750SP, YAMAHA YZF750R, YAMAHA YZF600R Thundercat, YAMAHA YZF-R7, YAMAHA YZF1000R ThunderAce, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XSR700, YAMAHA XJR400R2, YAMAHA XJR400R
I want to know what the limit is.
How far can we use it?
I want to know the wear limit value.
It was rattling, but I could use it if I wanted to.
If you say it's a life-saving part, I'll replace it as soon as possible.
I would like to see a quantitative display.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSR400, SUZUKI B-KING, Others Moto master, Others Beringer, Others brembo, Others brembo, Others brembo, Others SUNSTAR, Others Breaking, YAMAHA YZF-R3, YAMAHA MT03, HONDA CBR500R, YAMAHA Zeal
floater
The rotor was left as OEM, but the floater was changed to a flashy Anodized Color one.
This is an effective way to increase the custom look and feel.
View detail