Reviews
Longed-for OHLINS
I installed OHLINS, which I had longed for.
All in all, I am satisfied!
It said that the Speedometer Cable needed to be extended, but since it is Frame Mounting, it was Large sturdy with Normal cable.
I will be working on various settings in the future.
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
Bolt does not fit
Processing essential
It's a manufacturer famous for its price tag that only comes off when it's not processed.
View detail
Fits: SUZUKI GSX-S1000GT
Increased stability
I was wondering if it is supposed to be run with luggage in the Pannier or in daily use without the Pannier.
We replaced the OEMSuspension because we were concerned about the firmness and rebound of the OEMSuspension, especially when going over bumps.
After replacing the ring, the shock when going over bumps is reduced and the stability at the corner ring is increased.
It also has a lowdown effect of about 15m when riding, which improves the footing. (We are 171cm tall and have a long torso, Japan human body type)
I am satisfied with the performance of the Large, but the cost of the product and labor (Red Baron) was less than 100,000 yen, so I have given it a low cost-performance rating.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Highly satisfying just by the look of it.
The instruction manual is not clear enough. I recommend you to watch YouTube to see the image before you start the work. The ride quality is so different that anyone can tell the difference! View detail
Design is good, but... It didn't help me prevent buttock pain.
I was looking for a Seat with the primary purpose of preventing OEMSeat buttock pain.
It is a personal feeling, but the conclusion is that it has no effect on preventing buttock pain.
On the contrary, my butt hurt faster than OEM.
The OEM could sit for an hour to an hour and a half, or about 100 km in distance, without discomfort, but with this Seat, by the time an hour passed, I felt discomfort in my buttocks, which soon turned into pain.
Please note that the sensation varies from person to person and is for reference only.
I think the design looks good and the quality of the product is good.
The impression is hard, as you cannot tell by touch if there is any Gel in it.
No change in footing was felt for the 20mm ankle extractor.
What I was looking for was a soft and absorbent Seat, so it is the exact opposite.
I will consider other Seat after using it a little more.
Point that I decided to purchase this time
Price, with Gel, Tuck roll, 20mm Anko (bean paste)
My greatest expectation was for a Gel, but I was disappointed.
(What kind of Gel is in it?)
The effect of footing improvement by 20mm Anko removal is unknown.
Tuck roll design is GOOD.
It would have been a great cosmetic product at this price if it eliminated the buttock pain, but alas.
View detail
Tuck roll
I drove about 300km and I wished I had bought it earlier because it didn't hurt my butt so much and looked better than the OEMOPHigh seat.
Seat back is also almost like OEMSeat, inside front side. (where Gel Zab and Sponge are located) The "Seat" is also waterproof, which I thought was well thought out. A tool was also attached to the back.
When installing it, it feels a little too snug and a little tight.
(Archi, it's in long tail).
I had a hard time putting on the Tandem belt by myself… I have a grip strength of about 52kg, but it was tough to fix the bolt while pulling it.
View detail
At One point.
OEM Product quality is a must.
I don't think you will see this in FOR JAPAN MODELSEA BASS
View detail
For Mount bar mounting
[How is it used?
For rare vehicles that do not have a dedicated AttachmentMount bar,
Used to tighten the Bracket together with the Switch Box.
Was the one you received as per Image?
I have purchased this product in the past when it was processed on another vehicle,
The quality of the product is very low, and I think it's a perfect Spacer product.
Was the installation difficult?
Both inner and outer diameters are exactly the same as indicated, so it is a simple installation.
How was your experience with it?
The outer diameter is exactly the same size as the head of a Bolt with a hexagonal hole,
It fits in the bolt hole of the SW-BOX EXACTLY as we intended to use it.
[Included Parts:were they on?
Included Parts:No setting
[Was there anything that disappointed you?
There is none
Other items that would be helpful
Since the only colors available are Silver and Black,
It would be nice to have other colors.
View detail
Simple is good.
Installation is very easy as it is fixed with a tie band, but I am concerned that it may move in the future as the tightness is weak.
I installed it on my OHLINS front fork and I like the simplicity of it.
There are other, more expensive ones out there, but I think this one will suffice.
View detail
Just right!
For me, it is not too large and not too small, just the right size. The installation can be done by anyone since all you have to do is stick it on, and the price is reasonable, and the change in appearance makes it a good value. View detail
I will cancel the confirmation of the gold deposit because it has been too long.
Too late to confirm entry Gold (● Translated by ε´●) View detail
I'm just pimping...
[How is it used? Town ride
Was the one you received as per Image? It was a little different.
Was the installation difficult? Simply replace the Connector and you're done!
How was your experience with it? The light went from a light bulb color to a white light color like a White color fluorescent lamp, and the light was confirmed to be lit well even in daylight.
[Included Parts:were they on? Two Tie Wraps in Black for outdoor use
[Was there anything that disappointed you? Quantity of claws to fit into the insertion slots.:Pair (for Left and Right) Wiring is oriented in the same direction, so depending on the direction, the wiring is short and may interfere with the cowl, so care must be taken when routing the wiring.
Replacement of ▼Lamp requires removal of the exterior of the car body, No.2 long and short +Driver, M10φ? SocketLunch.
View detail
Fits: KAWASAKI ZX-14, KAWASAKI ZX-14R, KAWASAKI ZZR1400
I changed the look to a more modern look.
After 9 years of purchase, I changed the Blinker from Orange bulb to LED + Clear cover to match the LED + Clear cover of the Tail lamp. The price is a bit expensive at 10,000 yen, but it comes with Relay, so I guess that's about the same.
when Blinker is not attached. [Color] Clear is clean and Refreshing and I am satisfied with the aim.
ZX14R is very troublesome because the cowl has to be removed from both Front and Rear to replace the blinker valve, but I am used to this after installing other parts many times, so I can forgive it. (Plug replacement is the real work from here, and it is a very large change.)
It might be a bit challenging for someone removing Cowl for the first time?
It was worth the effort to replace it.
View detail
Fits: HONDA glom, HONDA SUPER CUBC125, HONDA DAX125, HONDA CT110 HUNTER CUB125, HONDA MONKEY125
Oil change
I like that it's all in there so I don't have to worry about replacing it. View detail
Wide MotorcycleBoots
I have a wide foot and usually wear 4E-5E, but I was having trouble finding wide MotorcycleBoots. But the width was still too tight, so I used my ShoeKeeper to widen the part of the boot that hits the foot. Also, because I made them one size too large, I had some soreness on my heel, but I put a commercially available support pad on it to make it fit. I am now using them mainly for short distance touring. I have extremely wide feet, so it can't be helped, but I am grateful to WildeWing for providing me with wide 4ESize MotorcycleBoots. I will take my time to acclimate them in the future. View detail
First SMARTDisplay
[How is it used?
Used for city driving and touring.
I use it with Apple CarPlay.
Was the one you received as per Image?
In fact, when you hold it in your hand, it is surprisingly small.
The screen size is 5-inches, which is almost the same size as X-ADV's Meter.
Was the installation difficult?
It was easy to install as it can be powered from a USB port.
Wiring from Battery is also possible.
How was your experience with it?
I am still using it only for city driving, so I wonder if it is convenient? I am not sure if it is useful or not.
Is the Navigation screen easier to see?
[Included Parts:were they on?
The Mount in Included Parts:was easy to install.
A simple instruction manual is included.
Download the PDFFile from Kijima's website for connection and use.
[Was there anything that disappointed you?
We are not yet in full operation. "Honestly, is this how it's going to be?" That's my impression.
It may be due to my usage environment, but sometimes the music gets cut off or I can't hear it.
The connection method is called Smartphone&arrarr;SMARTDisplay&arr;Income, but I can't grasp where the cause is.
I'm using IncomeB+COM SB6X, but I'm not experiencing any interruption in SMARTDisplay and Pairing, so I'm going to wait and see how it goes a bit more.
【Review】
I chose Kijima's Display considering AfterCare and FOR JAPAN MODEL certification because it is sold by JapanManufacturer, although products with the same spec. are sold at a lower price.
Price-wise, the same type of product without KijimaLogo would be considerably cheaper.
It does not have air pressure management or DreEveRecorder like other companies' products, but it may be worth buying if the display alone is sufficient for your needs.
I'm worried about my phone running out of heat in the coming season, so I'm looking forward to seeing how long I can use it.
View detail
Price is high, but texture is satisfactory
I chose this one because it is OEMOption. The capacity is larger than I expected, and I feel that a man can go for one night and two days with enough room to spare. The price is quite high, but when I tried it, I was satisfied with the quality and finish of the Large bag. However, there are no carrying straps or handles, so you need to attach them separately. It would have been better if they had attached a handle, but overall, I am satisfied. View detail
Fits: Others , YAMAHA Tracer900, DUCATI SS900, SUZUKI DL1000 V-STROM1050, SUZUKI DL1000 V-STROM650, SUZUKI V STROM250SX
Good, including storage when not in use.
Installation was easy and stable.
Back Cover had to be bunted to keep it loose or the Cover would flop around a bit while driving!
Even the slop on the bottom of the Back was removed with a quick wear!
When stored, it flattens out to save space.
View detail
Excellent stability
I thought 20,000 for just the carrier to attach the side back was expensive! It is firm and stable, and the stability is totally different from when I attached it with a seat bag or string. I think it is worth buying. View detail
Fits: Others High ace200 series (general)
Color is perfect.
The paint was painted with the same color number as the OEM, so the colors matched perfectly and there was no discrepancy at a quick glance.
But the paint on this product is too good to be different from the rest of the product if you look closely.
To put it simply and to the extreme, the paint on the Manufacturer is light and tangerine, whereas this product is smooth, which makes a difference in the reflection of the scenery.
The reflection of this product is definitely more beautiful (laughs).
I thought the painted surface of a commercial vehicle was like this, so I felt that the beautifully painted surface was a turn-off.
I just put it on and don't know how durable it is, so I'll give it 3 stars for now.
However, I am glad to have replaced the Guts Mirror because it looks good and is no longer a nuisance in the car wash machine, etc.
View detail