Reviews
Reliable JAPAN
Ideal for oil changes and Torque management of Bolt M6 to M14Bolt for Others exterior relations.
This 10-50Nm is good, especially since I don't do wheel/drive related stuff that requires high Torque.
It is a safe JAPAN and seems to be accurate.
View detail
Necessities for electrical component DIY
I bought this to find ACC power.
It's a great product, very easy to use and makes me feel like I know a little more about motorcycles.
View detail
Expensive tools are expensive for a reason.
Do you think that you can use a cheap torque wrench from Home center? The father of the motorcycle shop I go to always tells me that the price of the cheap tools is the price of the inaccuracy, so if you really want to maintain your car properly, you should get the proper tools. You're right, it's not cheap. We own two types, 20-100 and 40-200. It's not cheap. But Torque management is life. View detail
To check the vehicle's voltage status
It is not the one that can check the state of Battery directly, but it becomes a guide. It's built-in and safe to use. View detail
It is essential for accurate measurements.
The Chromium Plating treatment makes the Caliper resistant to rust and highly accurate, useful for measuring the remaining volume in Brake Pads, the inside diameter of a Pipe, the inside and outside diameter of a Washer, and the thickness of a Washer, etc. A sturdy and highly accurate Caliper for those who need to measure severe values. View detail
It's a must-have for DIY.
The Inspection Tester is very handy for removing power and checking the Earth, so you can see both color and sound. If you're installing electrical components yourself, it's very useful and safe to have it with you. View detail
Bought it to keep at home.
I basically do the simple maintenance myself, but I've always had a hunch about tightening the Bolts, etc.
I've been able to get by so far, but I thought it would be nice to have one, so I bought it.
The Size is quite Large-textured as it can be used for cars as well.
When using it on a Motorcycle, it's hard to use it in some places. It's like.
View detail
In the meantime, if you want a Torque wrench, I recommend it.
In the meantime, if you want a large torque wrench, I can recommend it.
However, I think the accuracy of this product is not so good as an object, and when you turn the Grip part, it feels a bit gory and difficult to turn it.
The key is that the Torque has no large difference between your handheld and the Tonichi, so I think it's a good costumer because you can trust it.
Torque accuracy is fine, but it's not very accurate as a thing.
If you don't mind, I recommend it.
View detail
For torque-management of the undercarriage.
You can drive safely by managing the torque in the essential and indispensable suspension and detachment of the wheel. It is a solid quality in a size that is easy to use. View detail
Directly from Manufacturer Sales
The company had a tone-in salesperson come to the company and promote the product. That's when I discovered the Digi-Torque and bought it.
This is placed between the Ratchet and Socket to measure the torque. When you reach the specified torque, you can hear a sound.
I use it for cars and motorcycles.
View detail
Durability ×
I used it for continuity testing, but unfortunately, it was not very useful.
The LED that emits a light when the device is switched on is right where it is held in the hand, so it is extremely difficult to see in bright light, let alone in the dark.
Also the durability was no good. I didn't bump into it, but the Minus line that Clip is attached to was broken from the root.
I thought the ordinary Inspection Tester was better.
View detail
It's easy to use, even for beginners.
I bought this one to change the engine oil at home.
Quality and texture:.
The Button and Grip areas are solidly built; Button's Response and grip are solid.
Performance/Functions:.
As mentioned before, it is a satisfying feature because it tells you by sound and light when you are near the setting Torque.
Ease of use:.
There is a slight hassle to get the batteries in and out each time.
Cost performance:
Compared to other famous manufacturers such as KTC, the cost performance is high because the price is reasonable and the torque management is solid.
The fact that it is more affordable than other torque wrenches was the deciding factor.
I've only used Analog's Torque wrench until now, but after reading the Instruction Manual carefully, I was able to use it.
It's easy to understand with sound and light, even for maintenance novices.
View detail
It's obviously textured.
I bought it to manage the Torque in areas where a certain amount of high Torque is applied, such as removing and installing the Axle Shaft.
I was troubled with the torque wrench of SIGNET, but I chose KTC though it was a little high as the cost of security because it was a tool used for a long time and accuracy was a large thing.
When it arrives and it uses it, it is a normal Pre-set torqueWrench, but the texture of Handlebar itself is obviously high, and it is easy to use as a tool Single Body.
View detail
The mesh hose is handy!
It is not easy to install the gauge into the back of the car like the air check of Motorcycle because of the gauge head. View detail
After all, it's convenient to have it.
It became necessary for the confirmation of electricity flow, and because the price is also reasonable, I purchased it.
The use is good for a wide range of applications as it can be used from 6V to 24V, the EarthGrip is a bit cheap, but there is no problem in use.
It's easy to use, and the light tells you the polarity difference between the + & minus; when it's time to check for power, and it's easy to use with a light and a Buzzer or a sound + light.
Curl CodeSpec. and the mindfulness in working with it is also thoughtful, and even people like me who are not good at electricity are easy to use, so I think that I can check electrical inspections with peace of mind. 。
View detail
The simple is best with the smallest function
The power supply itself is a bacchanal and has a Relay inside.
Connect the Startup Trigger to the Attachment power supply and the connection is complete
No standby power, so no need to worry about the battery
The function is really just to see the voltage and no switches or anything else.
It's easy to get a space for the Small Type.
Back light intensity is sufficient to see well at night.
View detail
High cost performance
When I installed the power supply for the XL1200S, I was wondering where to get the power supply from, so I decided to get the power supply from Fuse.
The Fuse power supply is the same Emon
"Mini Flat Type Fuse Power. https://www.webike.net/sd/22643196/
purchased and ready to go.
It seems that there are Plus and Minus in the Fuse. I pulled out the Fuse and tried to apply the terminals at both ends with tester.
Because it seems that there seems to be Plus and Minus in the Fuse power supply, and the side where Power Cord goes out seems to become Plus, the insertion is completed so that the terminal side Plus and Fuse power supply Plus may not be mistaken.
If you want to check details such as Ampereux, you should buy a proper tester, but if you only want to check whether it is energized or not, this product is sufficient enough performance.
This is more convenient if it's only about whether Plus is either or not etc.
When the LEDs glow, it makes me a little happy when they are energized.
I tried to remove the earth with the Bolt on the Frame, but the paint coating was too thick and it was difficult to remove the earth. I think it is not a problem for ordinary motorcycles, but you should be especially careful for Harley.
However, durability may be a little difficult to achieve because of the price.
If you want to check if the power is on or not, or if you don't use your tester that much but want to keep it in your toolbox, I recommend you to buy another product if you use it hard.
View detail
It's good to have it.
I introduced it from the memory of being made to cry by Puncture of the Regulator in the previous car, because I wanted to catch the sign. I prefer LCD than LED display.
The values were the same as we measured in Tester beforehand, and the voltage drop at the moment of turning the Cell was also clearly visible, so the measurement interval should be sufficient.
Since the body and Wiring are made separate bodies by coupler connection, it is good that positioning and wiring can be done separately, and the form of connecting them at the end is good. Even when it replaces with the malfunction of the body, the time and effort will be reduced. However, it is a little regrettable that Wiring itself has no tube and is bare, but used Colgate Tube for protection. In addition, since the coupler is Waterproof Specification, the place of placement may be troubled if there is no cowl.
The Large size, being reasonably Compact, allowed us to place it in the delicate gap between the Screen and the Tachometer on top of the meter. This position is also good for reading (Trip meter is much smaller).
View detail
It's going to last a long time.
It is very solidly made and can be used for a long time. The Bolt and Nut are not easily damaged by the wide range of sizes and no rattle. View detail
As expected
important item
[Do you have any products to compare it to?
From the Left in the photo below.
About 300 yen for AstroPRODUCTS MINIGauge
If this is accurate, I plan to carry it under Seat.
Amon Pen typeGauge About 500 yen
LargeThe cheapest thing I bought a long time ago.
Amon Air gauge about 1,500 yen.
This is the most used.
Amazon CompressorAir gauge about 2,500 yen
I also brought it to Circuit.
DAYTONA Air gauge about 3,000 yen
Purchased this time.
These five points are compared.
To avoid a drop in air pressure every time you take a measurement, set it to 2.5 every time. It is set at 2.5 every time to avoid a drop in air pressure every time you take a measurement.
The deciding factor in the purchase
I wonder if the accuracy of the air gauge is proportional to the price, but I think the brand is also important.
This is why I chose DAYTONA.
I'm going to the Circuit by myself, so I'm going to be able to go to the Circuit by myself. And? I brought my own camera. Every time I measure it, my reading is always higher than it should be. It always showed a high value.
This time, the measurements are compared as shown in the following photos.
The result? The ? The ? is too high and the ? The ? is a bit low. A majority of the panel decided to use the ? It was decided to use the ?
So, for Circuit, I brought ? brought the ?
(?) is always stored in Seat. always stored in Seat).
At home? used.
(Easy to use.)
View detail