【amon】Electroscopic Tester Review
High cost performance
When I installed the power supply for the XL1200S, I was wondering where to get the power supply from, so I decided to get the power supply from Fuse.
The Fuse power supply is the same Emon
"Mini Flat Type Fuse Power. https://www.webike.net/sd/22643196/
purchased and ready to go.
It seems that there are Plus and Minus in the Fuse. I pulled out the Fuse and tried to apply the terminals at both ends with tester.
Because it seems that there seems to be Plus and Minus in the Fuse power supply, and the side where Power Cord goes out seems to become Plus, the insertion is completed so that the terminal side Plus and Fuse power supply Plus may not be mistaken.
If you want to check details such as Ampereux, you should buy a proper tester, but if you only want to check whether it is energized or not, this product is sufficient enough performance.
This is more convenient if it's only about whether Plus is either or not etc.
When the LEDs glow, it makes me a little happy when they are energized.
I tried to remove the earth with the Bolt on the Frame, but the paint coating was too thick and it was difficult to remove the earth. I think it is not a problem for ordinary motorcycles, but you should be especially careful for Harley.
However, durability may be a little difficult to achieve because of the price.
If you want to check if the power is on or not, or if you don't use your tester that much but want to keep it in your toolbox, I recommend you to buy another product if you use it hard.
Responses
Other reviews
Inspection supplies that penetrate regardless of Material
[How is it used?
The power supply when installing a USB power supply, etc., and the earth search.
Was the one you received as per Image?
The package is simple and as shown in the Image.
It is unexpected that the tip of the terminal is quite sharp, perhaps to enable inspection by sticking it into the Plain Type Terminal.
Cap is included but was missing when I noticed it and may have been somewhat loose
How was your experience with it?
Although it was not possible to measure any voltage or current, it was possible to check various points with Earth clamped in appropriate places to see where the power source was coming from.
Since Cable is about 80cm, after checking Plus and Minus, we were able to try out the fixation points with pathways and Tie Wrap as it is.
Since it can be purchased for only one coin in terms of price, it is not so regrettable in case the Cable breaks or disconnects when it is bent at a steeper angle than expected by Handlebar, for example.
After installing all the electrical components, it is no longer used for measurement, but it is increasingly used as a tool for drilling holes because of its sharp tip and Gold price, which is not too high even if it is broken.
I've penetrated quite a few polyesters and skins, and the tips still remain sharp enough to be painful to the fingertips.
[Points to note]
The tip is sharp enough to easily pierce paper, thin plastic, cloth, and skin, so it is quite painful when it pierces the hand.
How did it compare to other products?
Compared to most products, the price is much lower due to the fact that the equipment does not measure.
Where can I get power and where can I connect it to use the electrical components? I recommend this product for people like me who think that all they need is to search for the answer. On the other hand, I want to see the values of electricity that I can't see. I want to work while watching. I do not recommend this product to such a person.
View detail
Buy this before you buy the expensive ones.
[How is it used?
I purchased this to check the disconnected part of the Blinker harness.
Was the one you received as per Image?
As per image.
How was your experience with it?
I don't have a Meter or anything like that.
It is easy to use, and it glows red when energized.
In this case, it was just to check the power, so this was sufficient.
[Points to note]
I don't know about voltage and such.
Only check for electrical current.
How did it compare with other products?
It was cheap and I needed it urgently.
View detail
Voltage is not measured.
Used to locate power source
LED in Body emits light when voltage is present
It can be checked with one hand, so it's useful in tight spaces.
View detail
Simple and easy to understand!
This time, I purchased it to check the ACC power supply from the fuse box for the installation of a car's driver's record system. The LED glows red to confirm that power is being supplied. I used it for the first time, but I had no trouble with it by referring to the instructions in the Emon site.
In other people's reviews, it seems that it is often used in Motorcycle electrical tinkering, and I would like to put it in my tool box and use it.
View detail
easy to understand
I purchased this product to replace a Flat Type Fuse Power Supply. The power detection was easy to understand and simple. View detail