Reviews
1pc. is useful for various purposes
[How is it used?
I bought it to use as a Drain pan for Oil change.
Oil replacement
Chain cleaning
Parts and tool storage for replacement of OthersParts
It is used for
Was the one you received as per Image?
I thought it was smaller than I expected, but considering that I was going to put it under the belly of the Panigale, 5LiterSize was just right in terms of Clearance.
How was your experience with it?
Oil replacement
In the case of Panigale, it produces about 3.5 liters of waste oil, but the weight of the oil causes it to deflect quite a bit.
There is a scale, but it cannot be used as a scale because there is only a line in one place.
Chain cleaning
I also use it as a receptacle for chain cleaner during chain cleaning. the size is just right and the area around it is now dirt free.
Parts and tool storage
When replacing or removing parts, it is easy to keep bolt nuts, etc. in the box and organize them without losing them.
[Points to note]
Material:It's not like a Stainless Steel pan or something, so I think it might deflect and spill if poured in parallel.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Light and affordable Large size
It is light, reasonably sized and inexpensive, so it is very useful. View detail
Convenient for changing oil and for storing parts.
I use it when changing Oil. I bought one and it was so good that I added another one. Other than that, I use it as a container for changing parts. It is good that they are usually stacked and do not get in the way.
It is not a product with special features, but it is sufficient for me. The price and the fact that it is in Japan is also a plus.
View detail
I thought it would be useful for coolant replacement since it is 8L Size.
I wanted a larger size than the Oil Receiver I have been using.
I thought 8L Size would be convenient to catch the coolant that pops out when replacing coolant.
The length did not change from the current one by a large amount.
The deep bottom of the unit is designed to fit the 5L Size inside to create a wall to catch the coolant that pops out.
The workability seems to be good.
View detail
Oil receiver on front fork.
Used to catch oil during front fork overhaul.
It's nice and reasonably deep.
I wish it was a little longer.
View detail
Exactly for oil change for motorcycles!
I purchased this for Oilfor Replacement for PCX.
[Large Kisa]
I bought 5Type L. Engine oil for PCX is 0.8L, so I wondered if it was too large. But I was satisfied with this large size because I can use it for parts cleaning.
【Texture】
The smooth surface is easy to wash and keep clean. It also has notches at one of the four corners, through which the oil can be transferred to the oil tank. It is thick and rigid to a certain degree, so it does not seem to bend under the weight of the oil. In my case, the amount of waste oil was so small that I was able to dispose of it with an oil-absorbing pad from a hundred-yen store.
【Cospa】
As a Plastic Tray, it is moderately priced, but when you use it, you will find that it performs well. Considering the rising cost of raw materials, I think it is relatively inexpensive.
View detail
When replacing Oil and Filter
Used when changing Oil and Filter in GSX1300R HAYABUSA. 5 liters container is about this much.
They did a good job for the Gold amount.
View detail
8L Size is recommended. It can be used as a parts bin.
There are many different types of oil recovery good, but I was first thinking of the recovery tank type, and was surprised at how large it was when I saw the actual product.
The recovery formula is too big. It is too big.
The height is quite high, and there is not much room for hands in the structure, so it looked tight when doing some repair work while removing the drain bolt or pulling out the oil.
So I decided to look for a simple Tray type. I bought this product based on various impressions and it was a Large success.
It is quite rigid and the notch is very convenient.
Incidentally, I substituted a 100-unit Case once before buying it, but it was so rigid that I couldn't lift it because it was so squishy and distorted after filling it with about 2 liters. I managed to lift it up by dragging it out, Phew!" I can't pour because it's too distorted! I'll try pouring it out, but it's not notched, so it spills a lot. I really want to die. I wet my pillow with tears.
This product is rigid enough so that this is not the case, and the notches allow for stable pouring. The notch is nice.
After pouring, simply wipe up with Dustcloth. It is easy to clean up and can be used as a parts tray.
We strongly recommend the 8L size, because if you choose the smallest size and the oil is filled to the maximum capacity, it will be extremely difficult when it comes time to pour it out.
Another feature of this product is that it is low in height for its capacity, making it very easy to work with on a Motorcycle. As you can see in the image, it can be placed under the SS with the Cowl attached with plenty of room to spare (actually, the Under Cowl is removed when replacing oil).
Unlike toro boats, the sloping outward slope and narrow edges make even the 8L size not particularly large in external shape, and the ConcreteBlock1.:It is only about 5pcs. long, so it is easy to store.
The reason why many people use Trays instead of OilPacks is because many municipalities allow you to put them in small plastic bottles and dispose of them in the combustible waste (you save money by not having to buy OilPacks), and you can put them in the Oil collection. I transfer from Tray to Oil Jug and from there to Plastic bottle.
View detail
I use it conveniently.
I bought three of them and they can be stacked and placed in a compact box, so they take up less space than containers. I also like the subdued colors, and now I have a reasonably sized Dan Pole box from Webike! View detail
I'm glad I got the Large size.
I purchased the 8L size thinking that it would be too large for my VTR250, which can only drain about 2L of oil, but when I used it, I found that it was surprisingly easy to dump oil (it does not spill even if you shake it when you hold it), so I was right.
Note that the vehicle body is in Maintenance Stand with the Rear raised; if it is left in Side Stand, it will not be high enough.
View detail
Cheap and normal use.
[How is it used?
Oil replacement of ninja400 (1.6-2.0L) For cleaning of OthersParts.
Was the one you received as per Image?
It arrived in Beauty condition.
How was your experience with it?
It is not very thick, so it can easily be placed under the car body.
The size is not too large, and I think 2L is just right. 4L replacement would be too much, so I think a larger size would be easier to work with.
There is an oil sink, but it is not very easy to use, and there were some common oil spills.
I have no complaints because it is inexpensive and Compact.
How did it compare to other products?
I think this product is fine for DIYLevel because a cheap oil tray is sufficient for this purpose.
View detail
Surprisingly Compact
I have not used it for Oil replacement yet, but it is surprisingly Compact and will be useful for Oil replacement. View detail
Serves the purpose well.
Size and capacity are perfect for kei car and a big scooter oil change. View detail
Add nothing, subtract nothing.
Nothing fancy, just Material:Plastic Oil Receptacle.
No fancy features or appearance at all.
I used to use a dish drainer that I no longer needed, which was convenient because of its deep bottom, but after all, I had been using it for almost 30 years and was becoming concerned about hydrolysis over time, so I bought this.
It would be a tragedy if, after receiving the waste oil, the container turned into a BALI dick during transportation! It would be a tragedy if the container turned out to be a "BALI COCK" during transportation after receiving the waste oil.
The dish drainer is white in color, so the waste oil stains stand out and cleaning was Large strange, but with this container, I don't have to clean it in the first place.
It would be enough to just wipe it down and stand it up on its side.
The dish receptacle was made of scrap metal and cost zero yen, so it's not a good comparison. Oil Pan" The "Guide" groove at the end of the unit makes it easy to dispose of oil, as one would expect from a company that calls itself a "Guide" company.
I have a 20L can with a funnel stuck in it to collect waste oil, and it is definitely easier to dispose of.
Thanks to its large area, it is designed to be low in height, so it is also a recommendation for those with low exhaust pipes.
On the other hand, the shallow bottom makes it easy to spill when moving with waste oil.
It is better to buy as large as the height allows.
View detail
Easy to use
I bought it at Oilfor Replacement.
At first I used it for Oil replacement, but after that I use it for Chain cleaning and parts cleaning.
It's made of plastic, but it's thick and elastic, so it won't break even if you handle it roughly.
The large size is just right so that it does not get in the way when stored away.
It is convenient to have one.
View detail
Nearly 4 liters of oil tends to overflow.
The reduced height makes it easy to use even for vehicles with low vehicle height, such as the BOLT Shoulder Bag.
However, when the amount of oil is close to 4 liters, the oil level is close to the edge, so a little bit of oil can cause a problem.
Waste oil spills.
I guess it is TradeOff with the height being held down, but I don't think so.
Therefore, it is recommended to use it in motorcycles with up to 3 liters of oil.
View detail
250 or more may be a little small.
This product can hold 5 liters of oil, but the plastic is a little flimsy, so if you put in 4 liters of oil, it will probably spill or tip over for sure. I think it is appropriate to use this product. View detail
It's just waste oil.
I bought this because I wanted a simple and cheap oil catcher.
The plastic boxes at Homsens are too tall and the capacity is too small, and it's hard to find something that fits.
With a capacity of 5 liters, it can also be used to replace oil in large motorcycles.
View detail
Oil change essentials
It's a must-have for Oil changes!
The size is just right and it is very useful.
View detail
It's cheap and the Size is just right.
[How is it used?
I use it to catch the old oil when I change the oil, and to temporarily place it when I change the parts with oil.
Was the one you received as per Image?
Simple box shape and easy to use.
How was your experience with it?
Surprisingly, there are no simple box-shaped oil receptacles of this size.
The ostentatious shape of the product is sold, but it is bulky and cannot be stored in the narrow SmallGarage.
This is a great way to stack and store it with other Stainless Steel Bat.
[Points to note]
None in particular
View detail