Reviews
Versatile Holding Tool for your Maintenance Needs
About quality and texture: I am happy with the quality of the pulley holder from Kitaco made from a steel construction with a PVC coating over the band to help improve it's hold.About the feeling of use: I have used this tool to hold the clutch and flywheel on my Honda Grom when removal of these parts were required for maintenance with great success. The adjustable band makes this tool very versatile for varies sized motorcycle parts.Products to buy together: Some more tooling like a center lock nut wrench would also be desirable to purchase along side the pulley holder so when it comes time to remove the clutch assembly and oil spinner on your Honda Grom you have all the special tooling required to complete the job.Difficulty of installation: The process to install takes a few minutes, place the pulley holder around the part that needs to be held and adjust the band if required. Tighten down the T handle so that the band holder does not allow the part to spin as you undo the fastener securing the part. Not difficult to do.Cost performance and comparison with other products: Good costing as this is a quality made band holder from Kitaco that has with stood numerous usage without failure as compared to the first band hold that I purchased from another site that failed soon after.About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: These band holder are limited to the sized parts they can hold. No smaller the 6cm in diameter and no larger then 12cm in diameter. View detail
Good tool if used as intended.
This tool does what you're asked if you use it for its intended purpose. Bought it to hold the flywheel on my Honda crf250r while tightening the nut. Some mentioned that it failed and didn't do its job. Don't use it to change the oil filters in your car or put on your ex-girlfriend's tire and it should work just fine. I've used it on a few bikes, KTM and Honda it still looks and works as it should. I would buy it again as it's the right price for a tool you can use about 6 times in your life.shipping is very fast,well packaged, thanks webike. View detail
Thoughts on using it
[How is it used?
Used to remove Clutch and Pulley from Scooter
Was the one you received as per Image?
No problem as per Image.
How was your experience with it?
I have not had any inconvenience at all.
[Points to note]
The holes are positioned in the most comfortable manner (opening angle), and then tightened and secured in place.
How did it compare to other products?
The product is not different in usability compared to the well-known manufacturer's product used in the past, and this product can be recommended because it is less expensive.
View detail
good on cost
[How is it used?
TZr250R (3XV) I used it to remove the Flywheel of the generator of the "Mere Old Man" because it was rusty and I wanted to maintain it.
The Universal holder is available from various manufacturers, but I don't know the difference, so I chose this product which was cheap.
Was the one you received as per Image?
It is bigger than I expected. I was able to use it as soon as it arrived without any rust.
How was your experience with it?
I inserted it into the hole in the Flywheel and removed the Nut from the Center, but the retention was a little unstable and I wanted another hand.
Well, I was able to remove the Nut safely, so it did its job well enough.
TZr250R (3XV) To remove the Flywheel, you can also use the Puller (https://www.webike.net/sd/152021/) is required (I don't think it has to be YamahaOEM Product)
[Points to note]
Because it is a Universal Product, it is not a translation that hangs firmly, and it is necessary to hold it well so that the Holder may not come off.
I did some good work with my feet and stuff.
How did it compare to other products?
To be honest, unless it's from a Chinese manufacturer that you don't understand, I think it's the same no matter which Large body you choose.
It seems that the shape of the tool is slightly different from that of the tool manufacturer such as Straight, so it may be more stable... though it is expensive.
I thought this product, which was in stock and inexpensive, would be the best cosmetic option.
【Review】
These Items are required to Rose the Engine.
I thought it would be good to consider the one of the tool manufacturer etc. according to the budget because it comes out from various manufacturers.
This product was enough for me because I don't have so many appearances.
View detail
I'm not on much.
I use it to remove the Flywheel on my LEAD 100.
There is a similar product, Band, Belt, or Type, but I would like to use the Pin type which is highly universal.
I chose the
The pin diameter of this product is 5mm and 9mm, and 5mm is just right for fixing the Flywheel of LEAD.
Also, the 9mm one is used to fix the drive train.
I really appreciate the universality of it.
I don't have a lot of time to use it in my daily maintenance, but the Gold price is reasonable, too.
It is very useful to have.
I mean, I can't do LEAD maintenance without it ….
View detail
Weight roller replacement
I used it to change the weight roller and it was my first time to do so, but it was done
However, I won't be using it for the time being
As a Sunday mechanic, this is good enough for me
View detail
It's an outside item
I used it to hold up a Pulley on a moped
Please note that this product is an external product
It cannot be pinched like a Stag beetle
No rattling etc. and high quality
View detail
Universal fixture
I purchased this device for locking the pulleys of a scooter (maxiscuter) when unscrewing the nuts on the variator and torcdriver axles. I'm happy with the purchase! It is a very useful tool for replacing the variator belt. I purchased this device for locking the pulleys of a scooter (maxiskuter) when unscrewing the nuts on the axles of the variator and the torc driver. Satisfied with the purchase! A very useful tool for replacing the variator belt. translated by Google Translator View detail
MINIMOTO Universal Holder
MINIMOTO Universal Holder-A very good tool for locking the bell of the front or rear scooter variator when unscrewing nuts in a garage environment. View detail
It was able to be used without problems
Purchase for Clutch exchange.
Quality was also good and could be used without problems
The price is reasonable as it is
Because it can only rotate by 180 ° in the attached Lever
I felt uncomfortable with a small car like 4 MINI.
If the tip is hexagon etc. so that it can be used even with Spanner etc.
I thought it was more convenient to use.
View detail
Good product with strength and satisfactory making
I bought it for FORZAMF 08 Drive belt exchange. Although the price was reasonable and there was anxiety about the product strength, it was relieved with firm making to actually take it. We use Impact wrench when removing Pulley but this product is necessary because we use Torque wrench when installing. View detail
It is cheap and a good Holder
Everything that comes from any Manufacturer has hardly changed
I bought the one with the cheapest KN project
Usability can be used together with Pulley face
Of course it can also be used on the Driven side
Because bar sticks are both tightened at the edge and Nut is removed, the part of the bar can be removed
It can be done as needed
Adjustment of the ring part can also be adjusted to 3 stages Can be changed by the butterfly Screw part of the horizontal board
View detail
HondaBENLY50110 Pulley
Honda BENLY 50110! Weight Roller for purchase, purchase! Honda car Scooter can be used in general, has become convenient. I need someone to keep me own View detail
This can be used.
I used it for desorption of Pulley of CYGNUS1YP.
Shaft is attached to the Handlebar part so that it can be tightly tightened, but if you tighten it with so much power, you can hold it firmly.
Initially, I wondered whether to become Universal wrench, but because the hooked part is deep, it is hard to use (Not available) Because there was information that it was made to Pulley holder. Results were purchased and correct answer was Large.
There is no place to use it, but the Red Rubber to hold it is weaker than we thought, it will be soooolid but it seemed like it was good to have bought it after a long time.
View detail
To fix Clutch
To fix CUB's centrifugal Clutch
It can be used for Clutch change work, Flywheel for Camshaft exchange
I am using it several times, but it can be used without breaking
View detail
The tool which just exists only for a Honda.Unless the Pulley is a nail type, it cannot fix a GEAR type thing.If there are , however this, this one tool is sufficient in removal of a Pulley and a Clutch! You should have, if it is Scooter riding of
The tool which just exists only for a Honda.Unless the
Pulley is a nail type, it cannot fix a GEAR type thing.If there are
, however this, this one tool is sufficient in removal of a Pulley and a Clutch! You should have, if it is Scooter riding of the
Honda.The construction material of the
tool is also good and strong.
View detail
Although the One-touch Pulley holder was used for SEA-BASS vehicles until now, it purchased in order to open a gear Pulley peculiar to a Honda. It was able to open by putting both the sides firmly and turning them alternately with a Wrench. It can u
Although the One-touch Pulley holder was used for SEA-BASS vehicles until now, it purchased in order to open a gear Pulley peculiar to a Honda.
It was able to open by putting
both the sides firmly and turning them alternately with a Wrench.
It can use also for a Clutch outer and is a case of killing two birds with one stone.
View detail
Isn't it the cheapest although it has come out also from other Manufacturers? -- even if cheap -- quality -- necessity -- it is enough and can use perfectly.
Isn't it the cheapest although it has come out also from other Manufacturers?
-- even if cheap -- quality -- necessity -- it is enough and can use perfectly.
View detail